Blar i Institutt for bygg- og miljøteknikk på tittel
Viser treff 2068-2087 av 4613
-
Increasing Utility Value of BIM in All Project Phases
(Master thesis, 2015)Many BIM applications have been developed since the concept of BIM was first published decades ago. Increased use of BIM has been most noticeable from 2000 until today in Norway, but the use and the achieved utility value ... -
Incremental Digital Twin Conceptualisations Targeting Data-Driven Circular Construction
(Peer reviewed; Journal article, 2021)The construction industry faces multiple challenges, where transition to circular production is key. Digitalisation is a strategy to increase the sector’s productivity, competitiveness, and efficiency. However, digitalisation ... -
Indicators for Sustainable Demand Risk Allocation in Transport Infrastructure Projects
(Peer reviewed; Journal article, 2020)Efficient risk allocation has been proven to be at the heart of effective and efficient infrastructure project operation. While most risks may be reasonably assigned in transport infrastructure projects, demand risk remains ... -
Indikatorer for verdien av industrialiseringstiltak
(Master thesis, 2019)Eieren av et byggeprosjekt er opptatt av å tjene mest mulig på gjennomføringen av prosjektet. Det er ønskelig å bygge boligene slik at boligkunden er villig til å betale mer for leiligheten, i tillegg til at eieren ønsker ... -
Individual Pitch Control for Large Scale Wind Turbines
(Doktoravhandlinger ved NTNU, 1503-8181; 2013:174, Doctoral thesis, 2013)In this thesis a number of advanced control algorithms are developed and applied for use with large scale onshore and offshore wind turbines. Individual pitch control for wind turbines is a relatively recent development, ... -
Indoor positioning using Bluetooth
(Master thesis, 2016)As GNSS is not accurate enough for indoor use, several systems using alternative technologies for indoor positioning have been developed. Most prominent are the systems based on Wi-Fi. These rely on the strength of the ... -
Industry 4.0: Potential Effects and Implementation
(Master thesis, 2019)Hensikt - Industrialisert byggeindustri møter stadig mer komplekse og krevende krav fra kunder. Innovative industrier som bilindustrien og mekaniske prosessindustrier har klart å integrere nye teknologier, som den ... -
Infiltrasjon i regnbed: Effekter av veisalt
(Master thesis, 2013)Regnbed er et terrengtilpasset infiltrasjonsanlegg beplantet med naturlig og stedstilpasset vegetasjon, som samler opp, fordrøyer og infiltrerer urbant overvann. Fysiske, kjemiske og biologiske prosesser som naturlig foregår ... -
Infiltrasjonssandfang - Dimensjoneringskriterier og kapasitetsmåling
(Master thesis, 2017)Denne masteroppgaven omhandler infiltrasjonsbaserte kumløsninger, og fokuserer på en typisk «standardisert» løsning, IFS-kum (infiltrasjonssandfangskum). Kummen er utviklet av StormAqua i Sandnes. Oppgaven er også et ... -
Infiltration based systems for stormwater management with multipurpose use
(Master thesis, 2020)Overvannsproblematikk grunnet klimaendringer og stadig utvikling av urbane områder er en voksende utfordring rundt om i verden. Dette har ført til økende behov for bærekraftige løsninger for overvannshåndtering, og interessen ... -
Infiltration Response of Adsorbent Amended Filters for Stormwater Management under Freezing/Thawing Conditions
(Journal article; Peer reviewed, 2019)Coastal cold climates experience frequent intermittent melting and freezing periods over the cold period. This intermittent freezing in stormwater systems affects the infiltration capacity and hence the performance. This ... -
Infiltration/Inflow Assessment and Detection in Urban Sewer System
(Journal article; Peer reviewed, 2015)Infiltration and inflow (I/I) of non-sewer water into the urban sewer system is a critical problem in the long term for sustainable urban water management and water infrastructural asset management, with serious environmental, ... -
Influence from Asperities - Modelling of Laboratory Test
(Master thesis, 2017)Traditional stability analysis of concrete dams is based on the Mohr-Coulomb failure criteria with a peak friction angle to find the shear capacity. The peak friction angle is often in the range between 40 and 50 degrees, ... -
The influence of acclimatization, age and gender-related differences on thermal perception in university buildings: Case studies in Scotland and England
(Peer reviewed; Journal article, 2020)Abstract The higher education sector in the UK is responsible for large amount of the country’s energy consumption. Space heating, which is the largest and most expensive part of the energy used in the UK educational ... -
Influence of concrete’s mechanical properties on the cracking of concrete dams
(Chapter, 2021)Analytical methods of structural stability assessment of concrete dams are often too simple and thus conservative in their predictions.Without the actual foundation geometry, capacity for some rigid body failure modes are ... -
Influence of earth pressure coefficients on numerical simulations in RAMMS
(Master thesis, 2020)Denne oppgaven innebærer undersøkelser av effekten som jordtrykkskoeffisienter har i numeriske modelleringer av flomskred. Flomskredene består av en blanding av jord, vann og stein og kan oppstå av ulike årsaker. Flomskred ... -
Influence of Evacuation Walkway Design Parameters on Passenger Evacuation Time along Elevated Rail Transit Lines Using a Multi-Agent Simulation
(Journal article; Peer reviewed, 2019)Passenger evacuation on elevated railway lines has always been an important issue for elevated rail transit safety management, because it is challenging to evacuate passengers efficiently in the event of man-made calamities ... -
Influence of grain size, organic carbon and organic matter residue content on the sorption of per- and polyfluoroalkyl substances in aqueous film forming foam contaminated soils - Implications for remediation using soil washing
(Peer reviewed; Journal article, 2023)A soil that was historically contaminated with Aqueous Film Forming Foam (AFFF) was dry sieved into size fractions representative of those produced during soil washing. Batch sorption tests were then conducted to investigate ... -
Influence of Gravel-Bed Porosity and Grain Orientation on Bulk Flow Resistance
(Journal article; Peer reviewed, 2018)This paper presents results from experiments that were carried out to study the effect of porosity and grain orientation on flow resistance. Experiments were performed over three rough surfaces; a water-worked gravel-bed, ... -
The Influence of Icephobic Nanomaterial Coatings on Solar Cell Panels at High Latitudes
(Peer reviewed; Journal article, 2022)Solar energy’s penetration at high latitudes has been boosted during recent years, but snow deposits during the winter still limit its exploitation. Therefore, various solutions for snow removal, such as icephobic coatings, ...