Blar i Institutt for elektroniske systemer på tittel
Viser treff 499-518 av 2289
-
Design and implementation of a 0.01 mm² current-mode temperature sensor in 22 nm FD-SOI with a sensing range of -40 °C to 125 °C and 6.3 nW at 0.8 V
(Master thesis, 2023)Dette arbeidet presenterer en temperatursensor implementert i en 22 nm Full- stendig Depletert Silikon på Isolator (FD-SOI) teknologi av GlobalFoundries. Arbeidet bygger på grunnarbeidet fra vårt tidligere prosjektarbeid ... -
Design and implementation of a 0.01 mm² current-mode temperature sensor in 22 nm FD-SOI with a sensing range of -40 °C to 125 °C and 6.3 nW at 0.8 V
(Master thesis, 2023)Dette arbeidet presenterer en temperatursensor implementert i en 22 nm Full- stendig Depletert Silikon på Isolator (FD-SOI) teknologi av GlobalFoundries. Arbeidet bygger på grunnarbeidet fra vårt tidligere prosjektarbeid ... -
Design and Implementation of a Digital Standard Cell Library for 28 nm Technology
(Master thesis, 2021)A digital standard cell library has been designed and implemented for a 28 nm technology. The library has been designed and optimized for a supply voltage of 300 mV, to be compatible with a standard design flow. Each cell ... -
Design and Implementation of a Dual-Channel Digital Preprocessor for a 16-Bit 1Gsps Zero-Order Hold DAC
(Master thesis, 2013)A growing trend among DAC designs and electronics production in general is performing signal processing digitally, rather than analog. Modern DAC designs often include digital preprocessors intended to simplify the analog ... -
Design and Implementation of a High Resolution, Discrete-Time Delta-Sigma ADC
(Master thesis, 2018)This thesis do a study on delta-sigma type A/D converters to find good trade-offs and optimize a design for high resolution conversion in embedded applications. The main objective is to define a state of the art high-resolution ... -
Design and Implementation of a Magnetic Energy Harvesting System for Low Primary Current Applications
(Master thesis, 2021)Energihausting er å utnytte små mengder omkringliggjande energi for å drive eit lavenergisystem, slik som for eksempel ei sensornode. Dette kan gjerast frå magnetfelta som kjem frå ein vekselstraum, Ip, som går gjennom ei ... -
Design and Implementation of a Reliable Transport Layer Protocol for NUTS
(Master thesis, 2015)The NTNU Test Satellite (NUTS) is a double CubeSat developed mainly by students and volunteers at the Norwegian University of Science and Technology (NTNU). One of the main goals of the NUTS mission is to establish a ... -
Design and implementation of BLE and LTE-M/NB-IoT antennas for a medical IoT gateway.
(Master thesis, 2020)Abstract will be available on 2023-06-22 -
Design and implementation of full system monitoring for a prototype Hyperloop pod
(Bachelor thesis, 2021)Målet med prosjektet er å lage et komplett overvåkingssystem for en Hyperloop prototype fartøy i samarbeid med studentorganisasjonen Shift Hyperloop. På grunn av Covid-19 pandemien ble fjorårets system ikke ferdig, og alt ... -
Design and Implementation of Underwater Acoustic Communication System Based on Frequency-domain Processing
(Doctoral theses at NTNU;2020:45, Doctoral thesis, 2020) -
Design and Modeling of High-Power Semiconductor Devices with Emphasis on AlGaN/GaNHEMTs
(Doktoravhandlinger ved NTNU, 1503-8181; 2013:207, Doctoral thesis, 2013)AlGaN/GaN based HEMTs are becoming one among the favorite choices for future highfrequency, high-power, high temperature electronics applications. This can be attributed to the excellent physical properties such as a wide ... -
Design and Modelling of a High Resolution, Continuous-Time Delta-Sigma ADC: In-depth noise considerations and optimization
(Master thesis, 2011)This work documents the important design considerations and high--level development of an efficient Continuous-Time DS A/D converter for given system requirements. Projecting characteristics is especially essential in the ... -
Design and Optimization of a 2.4 GHz, 30 dBm Power Amplifier Utilizing Drain Modulation for Enhanced Efficiency
(Master thesis, 2023)This thesis presents a study on the design and performance analysis of power amplifiers (PAs) utilizing envelope tracking (ET), or drain modulation, techniques to enhance their efficiency. The focus of this research is ... -
Design and Optimization of Piezoelectric-Powered Portable UV-LED Water Disinfection System
(Peer reviewed; Journal article, 2021)Due to the environmental pollution threatening human life, clean water accessibility is one of the major global issues. In this context, in literature, there are many portable water disinfection systems utilizing ultraviolet ... -
Design and simulation of terahertz perfect absorber with tunable absorption characteristic using fractal-shaped graphene layers
(Peer reviewed; Journal article, 2021)Graphene material, due to its unique conductivity and transparency properties, is utilized extensively in designing tunable terahertz perfect absorbers. This paper proposes a framework to design a tunable terahertz perfect ... -
Design and Simulations of Silicon-on-Insulator Long-Period Grating Couplers for Nanophotonic Sensor Applications
(Master thesis, 2023)Denne masteroppgaven fokuserer på design, simulering og fabrikkering av silisium-på-isolator (SOI) langperiodiske gitterkoblinger (LPG) for bruk i integrerte fotoniske kretser. Slike nanofotoniske sensorer basert på små, ... -
Design and test of an active memory interface module for an H.264 encoder
(Master thesis, 2014)In this thesis, the author describes a propositional design for a DDR3 memory interface, for an existing H.264/AVC video transcoder. The design uses the Memory Interface Generator (MIG), a Xilinx IP, as an overlying memory ... -
Design and Testing of a Race Car Inverter
(Master thesis, 2016)This Master s Thesis will present the design, implementation and testing of a two-level voltage source inverter and motor control system. The target vehicle is driven on all four wheels, so a four channel inverter system ... -
Design av 10 Watt effektforsterker for 5.8GHz
(Master thesis, 2008)Hovedmålet med denne oppgaven var å designe en 10 Watts pulset effektforsterker for bruk på 5.8GHz. Rapporten forklarer først viktige begreper og teori for bruk i forsterkerdesign. Videre blir det forklart hvordan ... -
Design av en effektiv og lineær 10W GaN PA med harmonisk tuning på inngang og utgang.
(Master thesis, 2020)Strebing etter høy effektivitet har historisk sett vært en drivkraft i effekforsterkerdesign. Mange effektforsterkere med høy effektivitet benytter kompressjon av utgangssignalet for å øke effektiviteten. Økning i effektivitet ...