Blar i Institutt for elektroniske systemer på tittel
Viser treff 490-509 av 2288
-
A Description of ICNIRP’s Independent, Best Practice System of Guidance on the Protection of People and the Environment from Exposure to Non-Ionizing Radiation
(Peer reviewed; Journal article, 2022)In this statement, the International Commission on Non-Ionizing Radiation Protection (ICNIRP) presents its structure, its activities, and general approach to providing guidance on NIR protection. The statement highlights ... -
Design and analysis of a dual-polarised patch antenna array for 77 GHz radar
(Master thesis, 2020) -
Design and Analysis of a Password Management System
(Master thesis, 2014)Managing passwords is a significant problem for most people in the modern world. In this thesis, a password management system has been designed and implemented as an iOS application called PassCue. PassCue is based on the ... -
Design and analysis of a video scaler suited for FPGA implementation
(Master thesis, 2017)A video scaler, is a module that receives a picture, enlarge or shrink it, and sends it back.The video scaler in this thesis was made to be part of an AXI-Stream Video System thatis suited to be implemented on a FPGA.The ... -
Design and analysis of an H.265 entropy encoder
(Master thesis, 2017)The Context-Adaptive Binary Arithmetic Coding(CABAC) used in High Efficiency Video Coding(HEVC/H.265) is a near optimal entropy coding method. As a consequence of this coding efficiency, CABAC implementation is a complicated ... -
Design and Analysis of an X-band Phased Array Patch Antenna
(Master thesis, 2013)An 8x8 array antenna has been designed for a frequency band of 8-8.5 GHz. The design has been made as a part of a project to develop a digital, active MIMO radar at the Norwegian Defence Research Establishment (FFI). The ... -
Design and Characterization of a 20 W Dual-Input Doherty Power Amplifier
(Master thesis, 2019)Signaler som brukes i moderne systemer for tradløs kommunikasjon har typisk høy PAPR. Dette gjør at ytelsen til RF-effektforsterkerne som brukes er lav når det gjelder virkningsgrad. Doherty-effektforsterkerarkitekturen ... -
Design and Characterization of a 6 W GaN HEMT Microwave Power Amplifier with Digital Predistortion Linearization
(Master thesis, 2011)In this thesis, characterization of a 6W GaN HEMT power amplifier for optimal operating conditions through load pull simulations and measurements is investigated.The purpose is to find source and load impedances to achieve ... -
Design and Fabrication of 12 GHz Double Loop M-FSS Transmitarray
(Master thesis, 2021)Denne masteroppgaven presenterer to design av elektromagnetiske linser kalt transmitarray, laget med en senterfrekvens på 12 GHz og en brennvidde på F=400 mm. Begge består av tre identiske plane lag som hver er dekket av ... -
Design and implementation of a 0.01 mm² current-mode temperature sensor in 22 nm FD-SOI with a sensing range of -40 °C to 125 °C and 6.3 nW at 0.8 V
(Master thesis, 2023)Dette arbeidet presenterer en temperatursensor implementert i en 22 nm Full- stendig Depletert Silikon på Isolator (FD-SOI) teknologi av GlobalFoundries. Arbeidet bygger på grunnarbeidet fra vårt tidligere prosjektarbeid ... -
Design and implementation of a 0.01 mm² current-mode temperature sensor in 22 nm FD-SOI with a sensing range of -40 °C to 125 °C and 6.3 nW at 0.8 V
(Master thesis, 2023)Dette arbeidet presenterer en temperatursensor implementert i en 22 nm Full- stendig Depletert Silikon på Isolator (FD-SOI) teknologi av GlobalFoundries. Arbeidet bygger på grunnarbeidet fra vårt tidligere prosjektarbeid ... -
Design and Implementation of a Digital Standard Cell Library for 28 nm Technology
(Master thesis, 2021)A digital standard cell library has been designed and implemented for a 28 nm technology. The library has been designed and optimized for a supply voltage of 300 mV, to be compatible with a standard design flow. Each cell ... -
Design and Implementation of a Dual-Channel Digital Preprocessor for a 16-Bit 1Gsps Zero-Order Hold DAC
(Master thesis, 2013)A growing trend among DAC designs and electronics production in general is performing signal processing digitally, rather than analog. Modern DAC designs often include digital preprocessors intended to simplify the analog ... -
Design and Implementation of a High Resolution, Discrete-Time Delta-Sigma ADC
(Master thesis, 2018)This thesis do a study on delta-sigma type A/D converters to find good trade-offs and optimize a design for high resolution conversion in embedded applications. The main objective is to define a state of the art high-resolution ... -
Design and Implementation of a Magnetic Energy Harvesting System for Low Primary Current Applications
(Master thesis, 2021)Energihausting er å utnytte små mengder omkringliggjande energi for å drive eit lavenergisystem, slik som for eksempel ei sensornode. Dette kan gjerast frå magnetfelta som kjem frå ein vekselstraum, Ip, som går gjennom ei ... -
Design and Implementation of a Reliable Transport Layer Protocol for NUTS
(Master thesis, 2015)The NTNU Test Satellite (NUTS) is a double CubeSat developed mainly by students and volunteers at the Norwegian University of Science and Technology (NTNU). One of the main goals of the NUTS mission is to establish a ... -
Design and implementation of BLE and LTE-M/NB-IoT antennas for a medical IoT gateway.
(Master thesis, 2020)Abstract will be available on 2023-06-22 -
Design and implementation of full system monitoring for a prototype Hyperloop pod
(Bachelor thesis, 2021)Målet med prosjektet er å lage et komplett overvåkingssystem for en Hyperloop prototype fartøy i samarbeid med studentorganisasjonen Shift Hyperloop. På grunn av Covid-19 pandemien ble fjorårets system ikke ferdig, og alt ... -
Design and Implementation of Underwater Acoustic Communication System Based on Frequency-domain Processing
(Doctoral theses at NTNU;2020:45, Doctoral thesis, 2020) -
Design and Modeling of High-Power Semiconductor Devices with Emphasis on AlGaN/GaNHEMTs
(Doktoravhandlinger ved NTNU, 1503-8181; 2013:207, Doctoral thesis, 2013)AlGaN/GaN based HEMTs are becoming one among the favorite choices for future highfrequency, high-power, high temperature electronics applications. This can be attributed to the excellent physical properties such as a wide ...