Browsing Institutt for elektroniske systemer by Title

Micromagnetic modelling and magnetic force microscopy of supermagnetism in patterned nanomagnetic arrays

Strømberg, Anders (Master thesis, 2018)

Advanced magnetic materials have played an important role in, and continue to pave the way for, innovative technological advancements. Modern day computers, sensors, and biomedicine would not be possible without the use ...

Micromagnetic Modelling of Thermally Induced Errors in Nanomagnetic Logic

Lee, Hanna Heggheim (Master thesis, 2018)

Micromagnetic simulations have been used to study nanomagnet structures of La0.7Sr0.3MnO3 (LSMO) with the aim of use in nanomagnetic logic (NML). Studying the success rate of signal propagation in chains of nanomagnets has ...

Microphone and source location in rooms using LiDAR-SLAM

Andresen, Jens Cappelen (Master thesis, 2020)

Hvis et automatisk målesystem som er kapabelt til å måle tusenvis av impulsresponser i rom skal bli utviklet må en pålitelig teknikk for lokalisering av mikrofonene utvikles. Denne masteroppgaven undersøker om bruk av ...

Microstrip U-slot Patch Antenna

Pedersen, Line Johanne Strætkvern (Master thesis, 2006)

This work presents two microstrip patch antennas in the L-band with a U-shaped slot cut into the radiating patch. This type of antenna has attracted much attention the last 10 years, due to its wideband characteristics. ...

Microwave Characterization and Analysis of RF-components in 5G-systems

Eiesland, Are Wostryck (Master thesis, 2019)

Denne masteroppgaven presenterer en karakterisering av GaN GH25 HEMT prosessen produsert av UMS, i tillegg til en simulering av envelope tracking teknikker på GaN og GaAs forsterkere. GaN MMICen er målt ved hjelp av en ...

Mid-frequency sound propagation under a rough sea-ice cover

Isachsen, Lina Thu (Master thesis, 2021)

I denne masteravhandlingen studeres forplantning av lyd i sjøvann under en isflate, med formål om kommunikasjon under is. Dette kan anvendes til navigasjon under is, klimaovervåking og havmodellering. For å adressere dette ...

Mid-Infrared Laser Spectroscopy for Glucose Sensing

Strøm, Karina (Master thesis, 2019)

For å kunne lage en enhet for kontinuerlig glukosemåling som har lang levetid er det ønskelig med en forbedret spektroskopi målemetode for å kunne detektere glukose. En slik enhet vil kunne forbedre livskvaliteten til ...

Mid-infrared spectroscopy with a fiber-coupled tuneable quantum cascade laser for glucose sensing

Jernelv, Ine Larsen; Strøm, Karina; Hjelme, Dag Roar; Aksnes, Astrid (Peer reviewed; Journal article, 2020)

A fiber-coupled transmission spectroscopy setup using a pulsed external-cavity quantum cascade laser (EC-QCL, 1200-900 cm−1 ) has been developed and demonstrated for measurements of aqueous solutions. The system has been ...

Mid-Infrared Tuneable Laser Spectroscopy for Glucose Sensing

Jernelv, Ine L. (Doctoral theses at NTNU;2020:231, Doctoral thesis, 2020)

Mid-infrared spectroscopy is a versatile analytical technique, with recent technological developments that enable further advancements towards miniaturised and portable sensor applications. Quantum cascade lasers (QCLs) ...

Migration from 8 to 32 bit microcontroller

Tyridal, Torbjørn (Master thesis, 2006)

This report presents the master thesis on migrating embedded systems from 8 to 32 bit CPU.It accounts for the study of different CPU architectures, their properties and use, with an emphasize on differences presented to ...

Migration of Produkt from ARM9-based to FPGA-based Architecture: HW/SW-partitioning and analysis of Architecture

Øvrebekk, Torbjørn (Master thesis, 2008)

The origins of this thesis is a project currently in development at Laerdal Medical A/S, a company developing first aid equipment and training solutions for medical personnel. One of their most prestigious projects it ...

MIMO Geometry and Antenna Design for High Capacity and Improved Coverage in mm-Wave Systems

Cella, Tommaso; Orten, Pål; Hjelmstad, Jens (Journal article; Peer reviewed, 2013)

We show a way to optimize the capacity and at the same time achieve high coverage in LOS for a mm-wave system indoor. We optimize MIMO with regard to maximum Shannon capacity for a pure LOS channel. We describe the general ...

Mini-MAM

Rein, Trine (Master thesis, 2014)

As the amount of digital content outside the broadcasting industry increase, the need for Media Asset Management systems among this new wave of content owners has increased. An efficient, user friendly and cheap MAM system ...

Miniature glass-metal coaxial waveguide reactors for microwave-assisted liquid heating

Sharma, Gaurav; Kouzaev, Guennadi (Journal article, 2023)

Microwave (MW) irradiation is recognized as an effective tool in industries related to pharmaceuticals, chemistry, nanoparticle synthesis, food, etc. In the hardware field, some research efforts are concentrated on creating ...

Miniatyr S-bånd telemetrisender

Braastad, Pål Anders; Halvorsen, Jørn; Hjermstad, Jan; Melgaard, Arnfinn (Bachelor thesis, 2005)

Forsvarets forskningsinstitutt har gitt oss i oppgave å videreutvikle en miniatyr S-bånd telemetrisender. Vi måtte derfor ta opp trådene fra arbeidet som ble gjort våren 2003, og konstruere en fysisk liten sender i 2.2 – ...

Miniatyr s-bånd telemetrisender

Etnestad, Audun; Seljeflot, Odd André (Bachelor thesis, 2002)

Oppgaven går i hovedsak ut på å vurdere ulike løsninger for konstruksjon av en s-bånd telemetrisender, komme med en konklusjon om den beste løsningen og videre realisere denne. Utviklingsverktøyet Orcad skal i tillegg ...

Minimizing Latency in Stream-Based Compression with the use of FPGA Dynamic Partial Reconfiguration: Hardware Parallelism Analysis

Gerstle, Nicholas Olav (Master thesis, 2014)

Dynamic partial reconfiguration is a relatively new technique that permits the reconfiguration of portions of an FPGA without stopping all on-chip logic. The confluence of the additional adaptability of dynamic partial ...