Blar i Institutt for elektroniske systemer på forfatter "Norges teknisk-naturvitenskapelige universitet, Fakultet for informasjonsteknologi og elektroteknikk,Institutt for elektroniske systemer"
-
Generation, and nonlinear Parameter Estimation, of Reflection Spectra from an Intravascular Fabry-Perót Sensor, for detecting Temperature and Glucose Concentrations
Rokkones, Didrik (Master thesis, 2017)GlucoSet AS has developed an intravascular Fabry-Perót (FP) glucose sensor. The sensor consists of a hydrogel cast on an optical fiber cut, representing a low finesse FP cavity. The cavity changes length with respect to ... -
Generic operational amplifier for MCU integration
Johansen, Erland (Master thesis, 2017)The versatility and useability of the opamp makes it widely used in hardware design. Thus having a general purpose opamp built in to the MCU can save many hardware developers both time, effort and money. As Microchip's ... -
High-level implementation of a partial DSP algorithm chain used in a digital radio using functional programming
Torsvik, Kristoffer Hove (Master thesis, 2016)This thesis investigates the advantages of using functional programming as a hardware description tool. The functional programming paradigm shares a lot of similarities with hardware, as it is highly parallel in nature and ... -
High-Speed Modem Timing Recovery - Implementation of low complexity timing recovery algorithms for high data rate communications
Sund, Arne Magnus (Master thesis, 2018)This project is given to me as a master-degree thesis, for the signal processing group at NTNU and WideNorth AS. The intention is to get a better understanding of how efficient and reliable different sample timing algorithms ... -
Humidity sensor
Helle, Even Rørstad (Master thesis, 2018)Disruptive Technologies(DT) has a sensor that is able to measure touch and proximity by monitoring change in capacitance. This work investigates the possibility of using the sensor for Relative humidity(RH) measurements. ... -
Hyperspectral Fluorescence and Reflectance Imaging of Bacteria and Oral Mucosa - a feasibility study
Vevang, Ine Mari (Master thesis, 2016)Dental health is an area with many challenges, in which non-invasive techniques for diagnostics is of great interest. Spatially resolved spectroscopy using hyperspectral imaging may provide such a technique. This thesis ... -
Implementation and Comparison of Digital Arithmetics for Low Voltage / Low Energy Operation
Holen, Aslak Lykre (Master thesis, 2015)This thesis compares digital arithmetic circuit implementations in a 28nm FD-SOI technology of an earlier solution done in a 65nm bulk CMOS technology. The design is a 16-operand adder circuit with 9-bit operands working ... -
Implementation of a System for Automatic Speech Recognition of Child Speech
Walsøe, Andre Utne (Master thesis, 2016)Most speech recognizers today are trained on adult speech corpora. Child speech differ from adult speech on several areas. These differences cause severe degradation in the performance of an ASR system developed for adult ... -
Ionosphere Gradient Monitoring (IGM) in a Ground Based Augmentation System (GBAS) using Double Difference Carrier Phase Measurements on short Baselines
Skomedal, Sigurd (Master thesis, 2014)This thesis is about the Ionospheric Gradient Monitor (IGM), which is currently developed at Indra Navia, as a part of Ground Based Augmentation System (GBAS). GBAS is an aircraft approach/landing system using GNSS signals. ... -
JPEG2000 Compression Software/Hardware Codesign
Bolstad, Lars Henrik (Master thesis, 2018)This report details development, verification and results for implementation of JPEG 2000 compression on a Zynq-7000~\cite{zynq7000} system-on-chip. Software/hardware co-development of the system is intended for on-board ... -
Modeling and monitoring cerebral blood flow in premature infants with patent ductus arteriosus using ultrasound Doppler technique
Tran, Alex (Master thesis, 2018)The aim of this thesis was to simulate cerebral bloodflow of premature infants with patent ductus arteriosus, using a lumped model. A linear Windkessel-3 model with constant peripheral resistance, and a non-linear Windkessel-3 ... -
Modeling of Peripheral Resistance in the Microvasculature for Diabetic Patients with Ultrasound Doppler Technique
Wisløff, Anna Karoline (Master thesis, 2018)Diabetes is a growing health problem worldwide and involves long-term complications. Microangiopathy is one of the main issues associated with diabetes and is a condition that is difficult to detect. The aim of this project ... -
MPEG-2 Transport Stream Demultiplexing and Key Frame Extraction for Use in Monitoring Systems
Thorstensen, Alexander E (Master thesis, 2015)Nevion Europe AS proposed a MPEG-2 Transport Stream monitoring system. The proposed system should receive a Transport Stream over UDP/IP, demultiplex the stream, extract key-frames from h.262 and h.264 coded video, downscale ... -
Multichannel ANC for Motorcycle Helmets
Loe, Dag Axel Aarset (Master thesis, 2015)This thesis investigates the potential of using active noise control (ANC) for attenuating the wind noise experienced by a motorcycle rider at speed. This is done by recording wind noise simultaneously at several locations ... -
Optimization of a low-cost pipelined sensor filtering system for microcontrollers
Sundbeck, Henrik Valø (Master thesis, 2018)The growing focus on systems which largely depend on sensor technology have recently experienced increased interest. Some applications are autonomous cars, bodyworn sensors, Internet of Things, In vivo sensory systems and ... -
Optoelectrical Sensors for Monitoring of Oxygen- and Phototherapy
Sjøholt, Adrian Bakke (Master thesis, 2016)This thesis is devoted to the design of two optoelectronic sensors systems to monitor the treatment of jaundice by phototherapy and conditions such as chronic obstructive pulmonary disease with oxygen therapy. ... -
Patterning and Characterization of Free-Standing Nanostructures in Magnetic Oxide Thin Films
Urnes, Marianne (Master thesis, 2016)Free-standing nanostructures consisting of lines measuring 650 nm wide and 4 mm long were produced over an area of 4x4 mm using electron beam lithography (EBL). The magnetic properties of the resulting structures was ... -
Perception vs. Quantification of Wind Turbine Noise
Wærås, Oda Linnea Ketilsdatter (Master thesis, 2018)The number of wind farms in the world, and in Norway, is increasing. As a consequence, the issue of noise annoyance and possible negative health effects caused by wind turbine noise, has become more prevalent. There are ... -
Personlig tilpasning av HRTF-sett for 3D-lyd
Brox, Kristian (Master thesis, 2016)For at vi skal kunne benytte oss av vår binaurale hørsel i virtuelle applikasjoner, ved bruk av hodetelefoner, trenger vi Hode-Relaterte Overføringsfunksjoner, forkortet til HRTF på engelsk. Uheldigvis vil denne HRTF'en ... -
Processing Techniques for Dilute Nitride Gallium Arsenide Intermediate-Band Solar Cell Structures
Hallum, Goran Erik (Master thesis, 2016)A solar cell processing procedure is calibrated for dilute nitride GaAs intermediate band solar cell structures, and applied to a reference GaAs cell. The processing consists of front and backside contact metalization, a ...