• X-ray Diffraction and Tomography Studies of Functional Organic Fibres 

      Esmaeili, Morteza (Doktoravhandlinger ved NTNU, 1503-8181; 2013:74, Doctoral thesis, 2013)
      Structural characterisations of materials belong to the primary interests of basic and applied research, since they provide insights into the interactions of molecules and atoms, establish correlations with desired properties ...
    • X-ray nanoscopy of a bulk heterojunction 

      Patil, Nilesh; Skjønsfjell, Eirik Torbjørn Bakken; Van den Brande, Niko; Chavez Panduro, Elvia Anabela; Claessens, Raf; Guizar-Sicairos, Manuel; Van Mele, Bruno; Breiby, Dag Werner (Journal article; Peer reviewed, 2016)
      Optimizing the morphology of bulk heterojunctions is known to significantly improve the photovoltaic performance of organic solar cells, but available quantitative imaging techniques are few and have severe limitations. ...
    • X-ray Scattering Study of Nanostructured GaSb Surfaces 

      Døli, Ellen (Master thesis, 2013)
      In this thesis the surface structure of a sample consisting of slightly tilted, denselypacked Gallium-Antimonide (GaSb) nanocones, self-assembled through Ion Beam Sputtering(IBS) is investigated with a selection of X-ray ...
    • X-ray Studies of Capture, Storage and Release of CO2 

      Rustenberg, Karin Hveding (Master thesis, 2012)
      We show experimentally that CO2 intercalates into the interlayer spaceof the synthetic smectite clay Li-fluorohectorite (LiFh). The intercalationoccurs for a range of conditions in terms of pressure (5 bar to 20 bar) ...
    • X-ray Studies of Carbon Dioxide Intercalation in Na-Fluorohectorite Clay at Near-Ambient Conditions 

      Hemmen, Henrik; Rolseth, Erlend G.; Fonseca, Davi de Miranda; Hansen, Elisabeth Lindbo; Fossum, Jon Otto; Plivelic, T (Journal article, 2012)
      We show experimentally that gaseous CO2 intercalates into the interlayer space of the synthetic smectite clay Na-fluorohectorite at conditions not too far from ambient. The mean interlayer repetition distance of the clay ...
    • XPS and GDOES characterization of porous coating enriched with copper and calcium obtained on tantalum via plasma electrolytic oxidation 

      Rokosz, Krzysztof; Hryniewicz, Tadeusz; Chapon, Patrick; Raaen, Steinar; Sandim, Hugo Ricardo Zschommler (Peer reviewed; Journal article, 2016)
      XPS and GDOES characterizations of porous coatings on tantalum after Plasma Electrolytic Oxidation (PEO) at 450 V for 3 minutes in electrolyte containing concentrated (85%) phosphoric acid with calcium nitrate and copper ...
    • Yb-Doped Fiber Lasers Operating in the Range of 1147-1200 nm 

      Dvoyrin, Vladislav; Medvedkov, OI; Sorokina, Irina T (Chapter, 2012)
      Pump source brightness and heat production per unit fiber length were found to be the critical parameters for the realized and investigated Yb-doped fiber lasers operating in the range of 1147-1200 nm.
    • Yb-Tm energy transfer in Y-codoped fibers 

      Klimentov, Dmitry; Sorokina, Irina T; Dvoyrin, Vladislav; Halder, Arindam; paul, mukul; Das, Shyamal; Bhadra, Shyamal; Pal, Mrinmay (Chapter, 2013)
      Experimental investigation of Yb-Tm energy transfer process in Yb/Tm-doped fibers with Y-codoping provided a fairly high energy transfer efficiency of 50 %, making lasers based on these glass fibers attractive for diode-pumping ...
    • YDFL Operating in 1150-1200-nm Spectral Domain 

      Dvoyrin, Vladislav; Medvedkov, OI; Sorokina, Irina T (Journal article; Peer reviewed, 2013)
      A family of high-power Yb-doped fiber lasers operated in the range of 1150–1180 nm with output powers of up to 35 W and optical efficiencies up to 60% is realized. Operation at 1200 nm is also demonstrated. Amplified ...
    • Zernike phase contrast in high-energy x-ray transmission microscopy based on refractive optics 

      Falch, Ken Vidar; Lyubormiskiy, Mikhail; Casari, Daniele; Snigirev, Anatoly; Snigireva, Irina; Detlefs, Carsten; Di Michiel, Marco; Lyatun, Ivan; Mathiesen, Ragnvald (Journal article; Peer reviewed, 2018)
      The current work represents the first implementation of Zernike phase contrast for compound refractive lens based x-ray microscopy, and also the first successful Zernike phase contrast experiment at photon energies above ...
    • Zigzag-Shaped Superlattices on the Basis of Graphene Nanoribbons: Structure and Electronic Properties 

      Saroka, Vasil; Batrakov, K.G. (Journal article; Peer reviewed, 2016)
      The paper focuses on superlattices consisting of two coplanar fragments of one-layer graphene nanoribbons that have different width and are connected at an angle. Classification of such superlattices was carried out; their ...
    • µSR study of Al-0.67%Mg-0.77%Si alloys 

      Nishimura, Katsuhiko; Matsuda, Kenji; Komaki, R; Nunomura, Norio; Wenner, Sigurd; Holmestad, Randi; Matsuzaki, Teiichiro; Watanabe, Isao; Pratt, Francis L.; Marioara, Calin Daniel (Journal article; Peer reviewed, 2014)
      Zero-field muon spin relaxation measurements were carried out with Al-0.67%Mg- 0.77%Si alloys in the temperature range from 20 K to 300 K. Observed relaxation spectra were compared with the relaxation functions calculated ...
    • α-Mg primary phase formation and dendritic morphology transition in solidification of a Mg-Nd-Gd-Zn-Zr casting alloy 

      Casari, Daniele; Mirihanage, Wajira; Falch, Ken Vidar; Ringdalen, Inga Gudem; Friis, Jesper; Schmid-Fetzer, Rainer; Zhao, Dongdong; Li, Yanjun; Sillekens, Wim H.; Mathiesen, Ragnvald (Journal article; Peer reviewed, 2016)
      Microstructure evolution in the commercial Mg-Nd-Gd-Zn-Zr alloy Elektron 21, solidified under nearly isothermal conditions, has been studied via in-situ X-ray radiography. For cooling rates View the MathML source≤0.075 ...
    • β- and δ-Al-Fe-Si intermetallic phase, their intergrowth and polytype formation 

      Becker, Hanka; Bergh, Tina; Vullum, Per Erik; Leineweber, Andreas; Li, Yanjun (Journal article; Peer reviewed, 2019)
      Crystal structure characteristics of coexisting β and δ phase were investigated in a purely intermetallic Al-Fe-Si alloy and in plate-shaped intermetallic particles formed in a model secondary Al7.1Si1.2Fe0.3Mn alloy. The ...