Blar i Institutt for fysikk på tittel
Viser treff 1369-1388 av 2653
-
Micro-scale studies of microbialinduced carbonate precipitation for the application of biocementation
(Doctoral theses at NTNU;2021:59, Doctoral thesis, 2021)Cement, which is used as a binding material in conventional concrete, is the second most consumed material by humans, after water. The production process of cement, however, causes a high emission of CO2 and contributes ... -
Microarrays for the study of compartmentalized microorganisms in alginate microbeads and (W/O/W) double emulsions
(Journal article; Peer reviewed, 2016)Understanding of cells has mainly been achieved through analysis of average properties of large cellular populations. The increased awareness of cellular heterogeneity in various biological systems, spans from single ... -
Microbial-induced calcium carbonate precipitation: An experimental toolbox for in situ and real-time investigation of micro-scale pH evolution
(Peer reviewed; Journal article, 2020)Concrete is the second most consumed product by humans, after water. However, the production of conventional concrete causes more than 5% of anthropogenic CO2 emissions and therefore there is a need for emission-reduced ... -
Microfluidic channels for biomedical diagnostic devices
(Doctoral theses at NTNU;2021:54, Doctoral thesis, 2021)Disease detection is of utmost importance for initiating appropriate treatment and efficient preventative measures. Therefore, providing an inexpensive, fast and robust alternative to the current detection techniques, ... -
Microfluidic devices for active and passive separation of submicron particles
(Doctoral theses at NTNU;2017:55, Doctoral thesis, 2017)Cancer is the leading cause of death in the developed world and the second leading cause in the developing world. Early detection improves the survival rates of cancer patients dramatically, but current methods of diagnosis ... -
Microfluidic dual picoinjection based encapsulation of hemoglobin in alginate microcapsules reinforced by a poly(l-lysine)-g-poly(ethylene glycol)
(Journal article; Peer reviewed, 2022) -
Microfluidic Fabrication of Mineralized Alginate Hydrogel Fibers
(Master thesis, 2015)Alginates are a family of naturally occurring polysaccharides that form gels in the presence of Ca2+-ions at physiological conditions. Calcium phosphate mineralized alginates have previously been investigated as a synthetic ... -
Microfluidics for Biological Studies - A Double Emulsion Platform for Cell Encapsulation and Analysis
(Master thesis, 2016)Encapsulation of biologicalmaterial in small, confined volumes has enabled the study of individual cells, revealing valuable and detailed information on cellular processes and behavior unavailable in traditional bulk ... -
Micromagnetic study of spin transport in easy-plane antiferromagnetic insulators
(Journal article; Peer reviewed, 2023) -
Microprobing of nanowire-based LEDs down to single nanowire level inside a FIB-SEM
(Master thesis, 2021) -
Microscale tools for the development of bacterial microarrays
(Doctoral thesis at NTNU;2016:61, Doctoral thesis, 2016)Heterogeneity within bacterial populations is a phenomenon that has gained much interest over the last decades. It has been shown that even isogeneous colonies under homogeneous conditions can display different phenotypes. ... -
Microscopical Characterization of Metal-Coated Polymer Microspheres under Mechanical Compression
(Master thesis, 2013)We have performed compression experiments on both metal-coated and uncoated resorcinol-formaldehyde polymer microspheres by a experimental setup developed in-house. Through images obtained from optical microscopy, the ... -
Microstructural and mechanical characterisation of a second generation hybrid metal extrusion & bonding aluminium-steel butt joint
(Peer reviewed; Journal article, 2020)Hybrid metal extrusion & bonding (HYB) is a joining method that enables solid-state bonding by combining addition of aluminium filler material through continuous extrusion with pressure exerted by a rotating steel tool. ... -
Microstructural Characterisation of Features Related to Grain Boundary Corrosion Phenomena in Aluminium Alloys
(Doctoral theses at NTNU;2020:260, Doctoral thesis, 2020)Aluminium (Al) alloys are of great interest as components for the automotive and aerospace industries. These alloys have great mechanical properties and are lighter than their alternatives. Light alloys will effectively ... -
Microstructural Characterization of Spheroidal Graphite Irons: A Study of the Effect of Preconditioning Treatment
(Peer reviewed; Journal article, 2023)The effect of preconditioning treatments on the control and improvement of spheroidal graphite iron (SGI) microstructure was evaluated. In the melt, 0.15% of Zr-(Ca, Al) FeSi preconditioner was added into different conditions. ... -
The microstructural origin of a hardness double-peak in an age-hardened EN-AW 6082
(Peer reviewed; Journal article, 2023)In this study, the origin of a double-peak during artificial aging of an EN-AW 6082 is analyzed with (S)TEM. The acquired TEM data is used as an input into a strength model by Holmedal [1] to explore the origin of the ... -
Microstructure studies of silicon for solar cells
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:16, Doctoral thesis, 2009) -
Microwave control of the superconducting proximity effect and minigap in magnetic and normal metals
(Journal article; Peer reviewed, 2016)We demonstrate theoretically that microwave radiation applied to superconducting proximity structures controls the minigap and other spectral features in the density of states of normal and magnetic metals, respectively. ... -
Mid-infrared dual-comb spectroscopy with 2.4 mu m Cr2+:ZnSe femtosecond lasers
(Journal article, 2010)The mid-infrared part of the electromagnetic spectrum is the so-called molecular fingerprint region because gases have tell-tale absorption features associated with molecular rovibrations. This region can be for instance ... -
Mid-Infrared Femtosecond Laser
(Chapter, 2013)Recent breakthroughs in femtosecond lasers operating directly in the mid-infrared wavelength region enabled generation of Watt-level output with ~10-nJ pulses and only 5 optical cycles duration, demonstrating interesting ...