Blar i Institutt for konstruksjonsteknikk på tittel
Viser treff 1648-1667 av 2483
-
Multi-scale strategy to estimate the mechanical and diffusive properties of cementitious materials prepared with CEM II/C-M
(Peer reviewed; Journal article, 2022)A procedure to estimate the mechanical and diffusive properties of cement pastes, mortars and concretes made with a novel CEM II/C-M (S-LL) binder that has been developed within the European EnDurCrete project, is presented ... -
Multi-span Suspension Bridge with Floating Towers
(Master thesis, 2013)The Norwegian Public Roads Administration (NPRA) is currently conducting a feasible study of crossing 8 fjords on the west coast of Norway. The most challenging crossing is the 3700 m wide Sognefjord. Three main concepts ... -
Multi-span Suspension Bridge with Floating Towers
(Master thesis, 2013)The Norwegian Public Roads Administration (NPRA) is currently conducting a feasible study of crossing 8 fjords on the west coast of Norway. The most challenging crossing is the 3700 m wide Sognefjord. Three main concepts ... -
A multi-surface interface model for sequentially linear methods to analyse masonry structures
(Peer reviewed; Journal article, 2021)In the finite element modelling of masonry structures, the micro-modelling technique of differentiating the continuum into a linear elastic bulk, and interfaces representing non-linear joints is common. However, this ... -
Multiaxial fatigue analysis of offshore mooring chains, considering the effects of residual stresses and corrosion pits
(Doctoral theses at NTNU;2020:337, Doctoral thesis, 2020)The integrity of the mooring lines used to anchor offshore facilities and floating platforms has been always desired while its continuous achievement has been challenging. Many mooring line failures have occurred in the ... -
Multiaxial stress–strain response and displacive transformations in NiTi alloy from first principles
(Journal article; Peer reviewed, 2016)Present ab initio study was focussed on a response of NiTi martensite to a superposition of shear and tensile or compressive stresses acting normally to the shear planes. The theoretically predicted base-centered orthorhombic ... -
Multimetric Event-driven System for Long-Term Wireless Sensor Operation in SHM Application
(Journal article; Peer reviewed, 2020)Wireless sensor networks (WSNs) are promising solutions for large infrastructure monitoring because of their ease of installation, computing and communication capability, and cost-effectiveness. Long-term Civil structural ... -
Multiscale materials modeling of cleavage fracture in bcc-Feand steel
(Master thesis, 2009) -
Nano-enabled anti-icing surfaces and coatings - Superhydrophobicity and icephobicity characterization of fouling-release coatings
(Master thesis, 2015)Anti-icing and icephobic materials have been topics of many researches due to the challenges that icing poses. Arctic regions are also gaining interest due to its resource potentials. In this thesis, different commercial ... -
Nano-scale characterisation of sheared β” precipitates in a deformed Al-Mg-Si alloy
(Journal article; Peer reviewed, 2019)This paper compares the nano-scale structure of β” precipitates in a peak-aged Al-Mg-Si alloy before and after deformation. Three complementary advanced transmission electron microscopy techniques are used to reveal the ... -
Nanoconfined Water Dynamics in Multilayer Graphene Nanopores
(Peer reviewed; Journal article, 2020)Water dynamics in frictionless carbon nanotubes and across ultrathin graphene nanopores have been extensively studied. In contrast, the fundamental properties of nanoconfined water in multilayer graphene nanopores (MGPNs), ... -
Nanohinge-Induced Plasticity of Helical Carbon Nanotubes
(Journal article; Peer reviewed, 2013)Helical carbon nanotubes with intentionally incorporated non‐hexagonal defects have unexpectedly high toughness and plasticity, in addition to the well‐recognized extreme elasticity. The obtained toughness approaches 5000 ... -
Nanomechanical Characteristics of Trapped Oil Droplets with Nanoparticles: A Molecular Dynamics Simulation
(Peer reviewed; Journal article, 2021)Nanoparticles (NPs) possess great potentials in applications to enhanced oil recovery (EOR), the underlying mechanisms of which however remain to be explored. In this study, the motion of NPs and the local pressure ... -
Nanomechanical characterization of additively manufactured metallic alloys
(Doctoral theses at NTNU;2022:96, Doctoral thesis, 2022)Additive manufacturing (AM), a burgeoning manufacturing method for producing metallic materials, induces extraordinary impacts on the resulting performance. It is of great importance to investigate the microstructure and ... -
Nanomechanical Characterization of Single Micron-Sized Polymer Particles
(Journal article; Peer reviewed, 2009)The mechanical characterization of single micron‐sized polymer particles is very important for understanding the anisotropic conductive adhesives interconnection. In this article, a nanoindentation‐based flat punch method ... -
NANOMECHANICS OF POLYMERAND COMPOSITE PARTICLES
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:213, Doctoral thesis, 2009)This thesis concerns the nanomechanics of micron-sized polymer and composite particles used in electronic packaging technology. The aim of this PhD study is to develop a scientific methodology for characterizing the ... -
Nanorubber-modified cement system for oil and gas well cementing application
(Journal article, 2017)Flexible cement systems with low shrinkage are more capable than the conventional cement systems to withstand the tensile stresses generated by fluctuation of temperature and pressure in oil and gas wells. In this work ... -
Nanoscale Correlations of Ice Adhesion Strength and Water Contact Angle
(Peer reviewed; Journal article, 2020)Surfaces with low ice adhesion represent a promising strategy to achieve passive anti-icing performance. However, as a successful and robust low ice adhesion surface must be tested under realistic conditions at low ... -
Nanoscale creep behavior and its size dependency of a Zr-based bulk metallic glass manufactured by selective laser melting
(Journal article; Peer reviewed, 2022)Nanoscale creep behaviors of metallic glasses (MGs) have gathered considerable interests in recent years, owing to their distinct atomistic mechanisms of plasticity. Additive manufacturing (AM) is a burgeoning technique ... -
Nanoscale Deicing by Molecular Dynamics Simulation
(Journal article; Peer reviewed, 2016)Deicing is important to human activities in low-temperature circumstances, and is critical to combat the damages caused by excessive accumulation of ice. The aim of creating anti-icing materials, surfaces and applications ...