Blar i Publikasjoner fra CRIStin - NTNU på tittel
Viser treff 8190-8209 av 37228
-
Design for Excellence to Explore Complex Product Service Systems: A Case Study
(Peer reviewed; Journal article, 2022)Complexity in new product development is claimed to continuously increase, causing challenges that require new and cross-disciplinary solutions. There are at least three major forces causing upheaval in the way we are ... -
Design for resilience: Using latent capabilities to handle disruptions facing marine systems
(Chapter, 2018)This paper explores how the resilience of marine systems against disturbances can be improved by considering latent capabilities. With resilience is meant the ability of a system to recover and return to an acceptable, ... -
Design for reusability of medical equipment for optimal modularization using an endoscope as case study
(Journal article; Peer reviewed, 2019)The reprocessing of reusable medical equipment (RME) is complex due to the difficulty of eliminating infections. Healthcare providers have expressed dissatisfaction with the difficulty faced in cleaning and disinfecting ... -
Design for sustainable use using principles of behaviour change
(Chapter, 2017)This chapter briefly sketches and visualizes how Design for Sustainable Behaviour (DfSB) has developed into an interdisciplinary research field within the past 10 years. Research within this field has resulted in an ever ... -
Design knowledge and teacher-student interactions in an inventive construction task
(Journal article; Peer reviewed, 2013)The teacher plays an important role in the Technology and Design (T&D) classroom in terms of guiding students in their design process. By using concepts developed within engineering philosophy along with a framework for ... -
A Design Method of an Embedded Real-Time Simulator for Electric Drives using Low-Cost System-on-Chip Platform
(Chapter, 2021)This paper presents a modular and easily reusable Zynq System-on-Chip (SoC) based Embedded Real-Time Simulator (ERTS) aimed for rapid prototyping of electric drives. The power hardware components of the drive including the ... -
Design methodology state-of-the-art report
(Research report, 2022)Marine systems design methodology is continuously evolving. On a strategic level, we have seen four major evolutionary tracks emerging from the sequential, iterative process captured in the classical design spiral. One is ... -
Design of a clinician dashboard to facilitate co-decision making in the management of non-specific low back pain
(Journal article; Peer reviewed, 2018)This paper presents the design of a Clinician Dashboard to promote co-decision making between patients and clinicians. Targeted patients are those with non-specific low back pain, a leading cause of discomfort, disability ... -
Design of a CO2 heat pump drier with dynamic modelling tools
(Chapter, 2019)Drying is an energy and time intensive process which thermal energy demand is mostly provided by fossil resources. Especially in the food processing industry it is important to increase the energy efficiency of drying ... -
Design of a cold thermal energy storage unit for industrial applications using CO2 as refrigerant
(Chapter, 2019)Natural refrigerants such as ammonia, hydrocarbons and CO2 are becoming increasingly popular due to favorable thermo-physical properties, low environmental impact and low cost. Industrial refrigeration systems are often ... -
Design of a compact, reconfigurable, prosthetic wrist
(Journal article; Peer reviewed, 2012)The design of a prosthetic wrist is the result of compromises between the function and the practicality of the device. Conventional prosthetic wrists use a single degree of freedom to produce pro/supination of the hand. ... -
Design of a medical decision-supporting system for the identification of brain tumors using entropy-based thresholding and non-local texture features
(Journal article; Peer reviewed, 2023)Introduction: Brain tumors arise due to abnormal growth of cells at any brain location with uneven boundaries and shapes. Usually, they proliferate rapidly, and their size increases by approximately 1.4% a day, resulting ... -
Design of a monitoring system for a long-span suspension bridge: optimal sensor placement
(Chapter, 2020)The design of systems for structural health monitoring is an exercise that requires careful planning of optimal sensor locations. The number of possible locations usually outnumbers the number of available sensors, which ... -
Design of a nonlinear damping control scheme for nanopositioning
(Journal article; Peer reviewed, 2013)The application of a nonlinear control law for vibration damping on a typical nanopositioning system is investigated. The nonlinear control law is an augmentation of the linear integral force feedback scheme, where the ... -
Design of a novel hybrid process for membrane assisted clean hydrogen production with CO2 capture through liquefaction
(Peer reviewed; Journal article, 2022)This work introduces a novel hybrid concept to produce H2 from natural gas by using the protonic membrane reformer (PMR) with liquefaction based CO2 capture system. For process intensification, recycling of the off-gas ... -
Design of a Power-Dense Aviation Motor With a Low-Loss Superconducting Slotted Armature
(Peer reviewed; Journal article, 2023)This article describes the design and analysis of a 2.5-MW, 5000-rpm electric motor with a slotted armature employing REBCO high-temperature superconductors (HTS). The alternating current and field in the armature induces ... -
Design of a practical and compact mm-wave MIMO system with optimized capacity and phased arrays
(Journal article; Peer reviewed, 2014)In this paper we evaluate the feasibility of short range outdoor mm-wave MIMO links in the 70 GHz portion of the E-band (71–76 GHz). We use phased arrays in order to strongly reduce the impact of the multipath components, ... -
Design of a Social Innovation Competence Framework to Educate Entrepreneurs in Developing on the International Stage
(Chapter, 2022)The European Commission identifies entrepreneurship as one of eight competences necessary for all members of a knowledge-based society. The Entrepreneurship Competence Framework (EntreComp framework) is a tool that European ... -
Design of a study evaluating the effects, health economics, and stakeholder perspectives of a multi-component occupational rehabilitation program with an added workplace intervention - A study protocol
(Journal article; Peer reviewed, 2018)Background Recent research has suggested that interventions at the workplace might be the most potent ingredient in return to work interventions, but few studies have investigated the different effects of workplace ... -
Design of a sustainable maritime multi-modal distribution network – case study from automotive logistics
(Peer reviewed; Journal article, 2020)Multi-modal transportation takes advantage of multiple transport modes and can be an effective way to ease the negative environmental effects of freight transportation. This paper addresses a multi-modal distribution network ...