Blar i Institutt for konstruksjonsteknikk på tittel
Viser treff 2231-2250 av 2458
-
A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics
(Peer reviewed; Journal article, 2020)Deformation-induced cavitation influences the mechanical response of polymeric materials, but acquiring in situ measurements of the spatial evolution of cavities has typically necessitated the use of synchrotron radiation ... -
Technologies enabling 3D stacking of MEMS
(Chapter, 2010)In order to realize reliable 3D stacking of micro electromechanical systems (MEMS), interconnection and through wafer via technologies have been adapted from other areas and verified ... -
Temperaturlaster i styrkeberegning av brukonstruksjoner
(Master thesis, 2018)Hensikten med denne oppgaven har vært å undersøke betydningen av temperaturlast i brukonstruksjoner og se på hvilke parametre som påvirker temperaturlastenes størrelse. Temperaturendringer fører til ekspansjon eller ... -
Tensile capacity of hollow core slabs subjected to concentrated edge loads
(Master thesis, 2021)Hulldekker benyttes ofte i prosjekter hvor det skal konstrueres balkonger slik at disse må festes inn i sidekant på dekkene. For å øke kapasiteten og installere forbindelsen støpes de to første hullene i hulldekkene med ... -
Tensile capacity of hollow core slabs subjected to concentrated edge loads
(Master thesis, 2021)Hulldekker benyttes ofte i prosjekter hvor det skal konstrueres balkonger slik at disse må festes inn i sidekant på dekkene. For å øke kapasiteten og installere forbindelsen støpes de to første hullene i hulldekkene med ... -
Tensile ductility of extruded aluminium alloy AA6063 in different tempers
(Journal article; Peer reviewed, 2018)The tensile ductility of the extruded aluminium alloy AA6063 in different tempers is investigated experimentally in this study. The results are correlated with the microstructure and the anisotropic plasticity of this ... -
Tensile Mechanical Characteristics of Thinnest Carbon Sulfur Nanothreads in Orientational Order
(Peer reviewed; Journal article, 2021)Carbon sulfur nanothreads (CSNTs) mainly composed of two chiral long alkane chains have been recently fabricated from thiophene by a pressure-induced phase transition in low-temperature, but their mechanical properties ... -
Tensile Testing Using the Kolsky-Hopkinson Bar Machine
(Chapter, 2018)The uniaxial stress-strain curve provides an important piece of information within several fields of engineering. Design of civil engineering and transport-related structures requires knowledge of stiffness properties, ... -
Tension behaviour of HNBR and FKM elastomers for a wide range of temperatures
(Journal article; Peer reviewed, 2016)This article presents uniaxial tension tests of three different elastomer compounds commonly applied as seal materials in the oil and gas industry. The tests were performed at five different temperatures, ranging from −20 ... -
Tension during parametric excitation in submerged vertical taut tethers
(Journal article; Peer reviewed, 2017)The construction of a suspension bridge with floating pylons or a submerged floating tunnel requires the installation of a mooring system. The option of taut vertical tethers, similar to those used in tension-leg platforms, ... -
Tension-loaded bolted connections in steel structures
(Master thesis, 2015)The purpose of this thesis is to study the behaviour of bolted steel connections subjected to tension. Quasi-static conditions have been considered. By performing laboratory tests on single bolts and simple T-stub connections ... -
Termomekanisk respons av ubrukt og degradert PA11
(Master thesis, 2019)I denne masteroppgaven har det blitt gjennomført eksperimentelle og numeriske studier på polyamid 11 (PA11). Arbeidet er utført for å undersøke den termomekaniske oppførselen ved varierende grad av triaksiel spenningstilstand ... -
Testing and modelling of annealed float glass under quasi-static and dynamic loading
(Journal article, 2018)In recent years, a considerable number of studies has been carried out to analyse the behaviour of laminated glass plates under blast loading by the use of the finite element method. This has proven to be quite challenging, ... -
Testing and modelling of butt-welded connections in thin-walled aluminium structures
(Peer reviewed; Journal article, 2022)The present paper experimentally investigated the mechanical behaviour of butt-welded joints and evaluated suitable numerical approaches for modelling them in thin-walled structures with large shell-based models. Welded ... -
Testing and modelling of flow-drill screw connections under quasi-static loadings
(Journal article; Peer reviewed, 2018)The behaviour of a flow-drill screw connection under different quasi-static loadings was simulated using finite element models with detailed solid element meshes. The numerical models were developed with a rate-independent ... -
Testing and modelling of multimaterial joints
(Doctoral theses at NTNU;2020:368, Doctoral thesis, 2020)The trend towards lightweight design in the automotive industry has led to increasingly optimal and complex structures, where fundamentally different materials are combined. An effective way of combining these would be to ... -
Testing and modelling of stiffened aluminium panels subjected to quasi-static and low-velocity impact loading
(Journal article, 2017)The behaviour and failure of stiffened panels made of the aluminium alloy AA6082-T6 is investigated under quasi-static and low-velocity impact loading conditions. The strain rate and inertia effects are found to be negligible ... -
Testing and Modelling of Thick Aluminium Castings Under Impact Loadings
(Master thesis, 2020)Denne masteroppgaven har som mål å etablere og forbedre en elementmetode (FE) modell som fanger opp oppførselen til en bilfelg utsatt for støtlast, ved bruk av “state-of-the-art” modelleringsteknikker. Utvikling er en del ... -
Testing and Modelling of Thick Aluminium Castings Under Impact Loadings
(Master thesis, 2020)Denne masteroppgaven har som mål å etablere og forbedre en elementmetode (FE) modell som fanger opp oppførselen til en bilfelg utsatt for støtlast, ved bruk av “state-of-the-art” modelleringsteknikker. Utvikling er en del ... -
Testing and simulation of additively manufactured AlSi10Mg components under quasi-static loading
(Peer reviewed; Journal article, 2020)An experimental and numerical study on the quasi-static loading of AlSi10Mg square boxes produced by selective laser melting (SLM) was carried out. The goal was to evaluate the applicability of common finite element modelling ...