Blar i Institutt for konstruksjonsteknikk på tittel

Viser treff 237-256 av 2461

    • Behaviour and modelling of cast aluminium rims subjected to impact loading 

      Kittilsen, Eirik Thanem; Swanberg, Emil (Master thesis, 2017)
      The aim of this master s project is to evaluate the capabilities of the SIMLab Metal models (cast aluminium model) to predict the response including failure of a given rim subjected to impact loading conditions. The modelling ...

    • Behaviour and Modelling of Fibre-Reinforced Polymers 

      Amundsen, Anne Helland (Master thesis, 2014)
      This thesis evaluates the behaviour of polypropylene (PP) and glass fibre reinforced polypropylene with a glass fibre content of10% and 30% by weight. Reinforcement materials are added to plastics to improve their mechanical ...

    • Behaviour and Modelling of Flexible Structures Subjected to Blast Loading 

      Aune, Vegard (Doctoral theses at NTNU;2017:101, Doctoral thesis, 2017)
      The last two decades have seen a significant increase in the research activity on blast-loaded structures. This is to a large extent related to the increased threat of deliberate use of high explosives against civilian ...

    • Behaviour and modelling of flow-drill screw connections 

      Sønstabø, Johan Kolstø (Doctoral theses at NTNU;2018:73, Doctoral thesis, 2018)
      This PhD thesis consists of experimental and numerical studies of the behaviour and modelling of flow-drill screw connections. It is comprised of four parts, and each part has been published, or accepted for publication, ...

    • Behaviour and modelling of multi-layered joints 

      André, Victor (Doctoral theses at NTNU;2023:322, Doctoral thesis, 2023)
      This thesis concerns the behaviour and modelling of multi-layered joints. The aim of the thesis is to provide a fundamental understanding of the behaviour of mechanical joints and their numerical modelling. The work mainly ...

    • Behaviour and modelling of polymers for crash applications 

      Delhaye, Virgile (Doktoravhandlinger ved NTNU, 1503-8181; 2010:251, Doctoral thesis, 2010)
      The present work concerns the characterisation and modelling of ductile polymeric materials for crash applications. The materials investigated are two particle-reinforced polypropylenes (PP) used in automotive industry. ...

    • Behaviour and Modelling of Self-piercing Screw and Self-piercing Rivet Connections: An Experimental and Numerical Investigation 

      Sønstabø, Johan Kolstø; Holmstrøm, Petter Henrik (Master thesis, 2013)
      Accurate and reliable models of connections are essential for the design of aluminium parts in cars. Today, there exist a few models customized for self-piercing rivets (SPR), but none for self-piercing screws (SPS). This ...

    • Behaviour and modelling of selfpiercing riveted connections using aluminium rivets 

      Hoang, Nguyen-Hieu (Doktoravhandlinger ved NTNU, 1503-8181, Doctoral thesis, 2011)
      The present thesis is concerned with the behaviour and modelling of self-piercing riveted connections using aluminium rivets. The objective has been to establish a database on the behaviour of self-piercing riveted connections ...

    • Behaviour and modelling of TPU 

      Boger, Beate (Master thesis, 2016)
      In towed marine seismic, a spread of sources and receivers behind a purpose made acquisition vessel are used to conduct seismic surveys. The receivers are grouped in streamers, each of length up to 12-14 km. The active ...

    • Behaviour and modelling of two semi-crystalline polymers over a wide range of rates and temperatures 

      Schwenke, Einar (Doctoral theses at NTNU;2023:104, Doctoral thesis, 2023)
      Through this thesis, I seek to explore how to characterise and simulate the strain rate and temperature dependent material behaviour of semi-crystalline polymers. To this end, a cross-linked polyethylene and a polypropylene ...

    • Behaviour and modelling of welded aluminum connections 

      Ruste, Simen August (Master thesis, 2022)
      Abstract will be available on 2025-06-11

    • Behaviour and Strength Prediction of reinforced Concrete Structures with Discontinuity Regions 

      Brå, Helge (Doktoravhandlinger ved NTNU, 1503-8181; 2004:11, Doctoral thesis, 2004)
      This report presents an analytical study on reinforced concrete members with disturbed stress and strain states which are mainly caused by geometrical irregularities and loading conditions. Finite element methods are used ...

    • Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates 

      Vilamosa, Vincent; Clausen, Arild Holm; Børvik, Tore; Skjervold, SR; Hopperstad, Odd Sture (Journal article; Peer reviewed, 2015)
      The thermo-mechanical behaviour in tension of three as-cast and homogenized Al-Mg-Si alloys, distinguished by their Mg and Si content, was investigated at a wide range of strains (the entire deformation process up to ...

    • Behaviour of aluminium at elevated strain-rates and temperatures 

      Nossen, Henrik Lund (Master thesis, 2010)
      The purpose of this thesis is to look at the effects of increased strain-rates and temperatures on the aluminium alloy AA6060. To do this, more than 50 experiments conducted in three different machines have been performed, ...

    • Behaviour of aluminium extrusions subjected to axial crushing 

      Langmoen, Erik Christoffer (Master thesis, 2009)

    • Behaviour of Aluminium Extrusions Subjected to Axial Loading 

      Jensen, Østen (Doktoravhandlinger ved NTNU, 1503-8181; 2005:7, Doctoral thesis, 2005)
      This thesis deals with the transition from progressive to global buckling of axially loaded thin-walled aluminium extrusions. The behaviour of the extrusions was studied experimentally and numerically using the finite ...

    • Behaviour of battened built-up members 

      Strandin, David Erik (Master thesis, 2022)
      Oppgaven tar for seg holdbarheten til formlene gitt i delkapittel 6.4.3 kalt Rammestaver påkjent av trykk i NS-EN 1993-1-1:2005, kjent som Eurocode 3. Dette delkapitlet handler om sammensatte tverrsnitt kalt rammestaver, ...

    • Behaviour of End plate connections of high strength steel subjected to bending moment 

      Kassim, Firoz Feruzi (Master thesis, 2016)
      NS-EN 1993-1-8 is part of the Eurocode 3 series, which deals mainly with the design of joints in steel structures. It provides rules and procedures for calculating the capacity and the rotational stiffness of joints in a ...

    • Behaviour of Flow-Drilling Screw Connections 

      Sønstabø, Johan Kolstø; Holmstrøm, Petter Henrik; Morin, David; Langseth, Magnus (Journal article; Peer reviewed, 2014)
      An experimental study on the behaviour and fracture of flow-drilling screw connections was carried out. Cross test specimens were used to study the deformation and fracture of the connections under different loading modes. ...

    • Behaviour of plated structures subjected to blast loading 

      Aune, Vegard; Børvik, Tore; Langseth, Magnus (Journal article; Peer reviewed, 2015)
      An experimental investigation using a new shock tube facility to study blast-load effects on thin aluminium plates is presented. The shock tube is designed to expose materials and structures to extreme loading conditions, ...