Blar i Institutt for konstruksjonsteknikk på tittel
Viser treff 239-258 av 2483
-
Behaviour and Modelling of AA6xxx Aluminium Alloys Under a Wide Range of Temperatures and Strain Rates
(Doctoral thesis at NTNU;2015:63, Doctoral thesis, 2015)This thesis addresses the behaviour and the modelling of the thermo-mechanical response of Al-Mg-Si (aluminium) alloys in tension subject to a wide range of temperatures and strain rates. The work is organised into a ... -
Behaviour and modelling of cast aluminium rims subjected to impact loading
(Master thesis, 2017)The aim of this master s project is to evaluate the capabilities of the SIMLab Metal models (cast aluminium model) to predict the response including failure of a given rim subjected to impact loading conditions. The modelling ... -
Behaviour and Modelling of Fibre-Reinforced Polymers
(Master thesis, 2014)This thesis evaluates the behaviour of polypropylene (PP) and glass fibre reinforced polypropylene with a glass fibre content of10% and 30% by weight. Reinforcement materials are added to plastics to improve their mechanical ... -
Behaviour and Modelling of Flexible Structures Subjected to Blast Loading
(Doctoral theses at NTNU;2017:101, Doctoral thesis, 2017)The last two decades have seen a significant increase in the research activity on blast-loaded structures. This is to a large extent related to the increased threat of deliberate use of high explosives against civilian ... -
Behaviour and modelling of flow-drill screw connections
(Doctoral theses at NTNU;2018:73, Doctoral thesis, 2018)This PhD thesis consists of experimental and numerical studies of the behaviour and modelling of flow-drill screw connections. It is comprised of four parts, and each part has been published, or accepted for publication, ... -
Behaviour and modelling of multi-layered joints
(Doctoral theses at NTNU;2023:322, Doctoral thesis, 2023)This thesis concerns the behaviour and modelling of multi-layered joints. The aim of the thesis is to provide a fundamental understanding of the behaviour of mechanical joints and their numerical modelling. The work mainly ... -
Behaviour and modelling of polymers for crash applications
(Doktoravhandlinger ved NTNU, 1503-8181; 2010:251, Doctoral thesis, 2010)The present work concerns the characterisation and modelling of ductile polymeric materials for crash applications. The materials investigated are two particle-reinforced polypropylenes (PP) used in automotive industry. ... -
Behaviour and Modelling of Self-piercing Screw and Self-piercing Rivet Connections: An Experimental and Numerical Investigation
(Master thesis, 2013)Accurate and reliable models of connections are essential for the design of aluminium parts in cars. Today, there exist a few models customized for self-piercing rivets (SPR), but none for self-piercing screws (SPS). This ... -
Behaviour and modelling of selfpiercing riveted connections using aluminium rivets
(Doktoravhandlinger ved NTNU, 1503-8181, Doctoral thesis, 2011)The present thesis is concerned with the behaviour and modelling of self-piercing riveted connections using aluminium rivets. The objective has been to establish a database on the behaviour of self-piercing riveted connections ... -
Behaviour and modelling of TPU
(Master thesis, 2016)In towed marine seismic, a spread of sources and receivers behind a purpose made acquisition vessel are used to conduct seismic surveys. The receivers are grouped in streamers, each of length up to 12-14 km. The active ... -
Behaviour and modelling of two semi-crystalline polymers over a wide range of rates and temperatures
(Doctoral theses at NTNU;2023:104, Doctoral thesis, 2023)Through this thesis, I seek to explore how to characterise and simulate the strain rate and temperature dependent material behaviour of semi-crystalline polymers. To this end, a cross-linked polyethylene and a polypropylene ... -
Behaviour and modelling of welded aluminum connections
(Master thesis, 2022)Abstract will be available on 2025-06-11 -
Behaviour and Strength Prediction of reinforced Concrete Structures with Discontinuity Regions
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:11, Doctoral thesis, 2004)This report presents an analytical study on reinforced concrete members with disturbed stress and strain states which are mainly caused by geometrical irregularities and loading conditions. Finite element methods are used ... -
Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates
(Journal article; Peer reviewed, 2015)The thermo-mechanical behaviour in tension of three as-cast and homogenized Al-Mg-Si alloys, distinguished by their Mg and Si content, was investigated at a wide range of strains (the entire deformation process up to ... -
Behaviour of aluminium at elevated strain-rates and temperatures
(Master thesis, 2010)The purpose of this thesis is to look at the effects of increased strain-rates and temperatures on the aluminium alloy AA6060. To do this, more than 50 experiments conducted in three different machines have been performed, ... -
Behaviour of aluminium extrusions subjected to axial crushing
(Master thesis, 2009) -
Behaviour of Aluminium Extrusions Subjected to Axial Loading
(Doktoravhandlinger ved NTNU, 1503-8181; 2005:7, Doctoral thesis, 2005)This thesis deals with the transition from progressive to global buckling of axially loaded thin-walled aluminium extrusions. The behaviour of the extrusions was studied experimentally and numerically using the finite ... -
Behaviour of battened built-up members
(Master thesis, 2022)Oppgaven tar for seg holdbarheten til formlene gitt i delkapittel 6.4.3 kalt Rammestaver påkjent av trykk i NS-EN 1993-1-1:2005, kjent som Eurocode 3. Dette delkapitlet handler om sammensatte tverrsnitt kalt rammestaver, ... -
Behaviour of End plate connections of high strength steel subjected to bending moment
(Master thesis, 2016)NS-EN 1993-1-8 is part of the Eurocode 3 series, which deals mainly with the design of joints in steel structures. It provides rules and procedures for calculating the capacity and the rotational stiffness of joints in a ... -
Behaviour of Flow-Drilling Screw Connections
(Journal article; Peer reviewed, 2014)An experimental study on the behaviour and fracture of flow-drilling screw connections was carried out. Cross test specimens were used to study the deformation and fracture of the connections under different loading modes. ...