Blar i Institutt for konstruksjonsteknikk på tittel
Viser treff 2231-2250 av 2466
-
Synthesis, characterization, and thermodynamic study of selected K-based zeolites
(Peer reviewed; Journal article, 2021)Potassium-rich zeolites often occur in cementitious systems, as K+ is widespread in various cementitious materials, such as Portland, blended and alkali-activated cements. The knowledge of their stability and of thermodynamic ... -
Synthesis, characterization, and thermodynamic study of selected Na-based zeolites
(Peer reviewed; Journal article, 2020)Zeolites are crystalline aluminosilicates with three-dimensional framework structures that can form in alkali-activated cements, Roman cements, and the interaction zone of cements and clays. However, their stability domains ... -
System identification of the Hardanger Bridge using enhanced frequency domain decomposition
(Master thesis, 2015)The Norwegian Public Roads Administration is commissioned to investigate feasible alternatives to eight ferry crossings along E39, located on the western coast of Norway. The most challenging crossing is the Sognefjord, ... -
Systematic Metadata Analysis of Wind-Exposed Long-Span Bridges for Road Vehicle Safety Assessments
(Journal article; Peer reviewed, 2022) -
Søylefotpunkt
(Master thesis, 2010)Denne oppgaven omhandler søylefotforbindelser i stålkonstruksjoner. Det er sett på kapasitets- og stivhetsformler for søyleføtter som står i knutepunktstandarden NS-EN 1993-1-8. Denne standarden klassifiserer knutepunkt ... -
Søylefotpunkter
(Master thesis, 2010)Knutepunktsstandarden, Eurokode 3-1-8, gir regler for å beregne kapasitet og stivhet til et knutepunkt. Disse reglene baserer seg på komponentmetoden, der knutepunktet blir delt inn i flere basiskomponenter, og kapasitet ... -
Søylekapasitet til Herøybrua
(Master thesis, 2015)Denne rapporten tar for seg ulike korrosjonsmekanismer i armert betong og vurderer betydningen av skadene. Dette er gjort med en konkret betongkonstruksjon som eksempel. Herøybrua er valgt og denne brua er ei fritt ... -
A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics
(Peer reviewed; Journal article, 2020)Deformation-induced cavitation influences the mechanical response of polymeric materials, but acquiring in situ measurements of the spatial evolution of cavities has typically necessitated the use of synchrotron radiation ... -
Technologies enabling 3D stacking of MEMS
(Chapter, 2010)In order to realize reliable 3D stacking of micro electromechanical systems (MEMS), interconnection and through wafer via technologies have been adapted from other areas and verified ... -
Temperaturlaster i styrkeberegning av brukonstruksjoner
(Master thesis, 2018)Hensikten med denne oppgaven har vært å undersøke betydningen av temperaturlast i brukonstruksjoner og se på hvilke parametre som påvirker temperaturlastenes størrelse. Temperaturendringer fører til ekspansjon eller ... -
Tensile capacity of hollow core slabs subjected to concentrated edge loads
(Master thesis, 2021)Hulldekker benyttes ofte i prosjekter hvor det skal konstrueres balkonger slik at disse må festes inn i sidekant på dekkene. For å øke kapasiteten og installere forbindelsen støpes de to første hullene i hulldekkene med ... -
Tensile capacity of hollow core slabs subjected to concentrated edge loads
(Master thesis, 2021)Hulldekker benyttes ofte i prosjekter hvor det skal konstrueres balkonger slik at disse må festes inn i sidekant på dekkene. For å øke kapasiteten og installere forbindelsen støpes de to første hullene i hulldekkene med ... -
Tensile ductility of extruded aluminium alloy AA6063 in different tempers
(Journal article; Peer reviewed, 2018)The tensile ductility of the extruded aluminium alloy AA6063 in different tempers is investigated experimentally in this study. The results are correlated with the microstructure and the anisotropic plasticity of this ... -
Tensile Mechanical Characteristics of Thinnest Carbon Sulfur Nanothreads in Orientational Order
(Peer reviewed; Journal article, 2021)Carbon sulfur nanothreads (CSNTs) mainly composed of two chiral long alkane chains have been recently fabricated from thiophene by a pressure-induced phase transition in low-temperature, but their mechanical properties ... -
Tensile Testing Using the Kolsky-Hopkinson Bar Machine
(Chapter, 2018)The uniaxial stress-strain curve provides an important piece of information within several fields of engineering. Design of civil engineering and transport-related structures requires knowledge of stiffness properties, ... -
Tension behaviour of HNBR and FKM elastomers for a wide range of temperatures
(Journal article; Peer reviewed, 2016)This article presents uniaxial tension tests of three different elastomer compounds commonly applied as seal materials in the oil and gas industry. The tests were performed at five different temperatures, ranging from −20 ... -
Tension during parametric excitation in submerged vertical taut tethers
(Journal article; Peer reviewed, 2017)The construction of a suspension bridge with floating pylons or a submerged floating tunnel requires the installation of a mooring system. The option of taut vertical tethers, similar to those used in tension-leg platforms, ... -
Tension-loaded bolted connections in steel structures
(Master thesis, 2015)The purpose of this thesis is to study the behaviour of bolted steel connections subjected to tension. Quasi-static conditions have been considered. By performing laboratory tests on single bolts and simple T-stub connections ... -
Termomekanisk respons av ubrukt og degradert PA11
(Master thesis, 2019)I denne masteroppgaven har det blitt gjennomført eksperimentelle og numeriske studier på polyamid 11 (PA11). Arbeidet er utført for å undersøke den termomekaniske oppførselen ved varierende grad av triaksiel spenningstilstand ... -
Testing and modelling of annealed float glass under quasi-static and dynamic loading
(Journal article, 2018)In recent years, a considerable number of studies has been carried out to analyse the behaviour of laminated glass plates under blast loading by the use of the finite element method. This has proven to be quite challenging, ...