Blar i Institutt for konstruksjonsteknikk på tittel
Viser treff 1117-1136 av 2472
-
Four-point transient potential drop measurements on metal plates
(Journal article; Peer reviewed, 2020)The transient potential drop method is based on measurement of the transient voltage on the surface of a conductor due to the injection of a pulsed current. In this paper, we consider an approximate analytical model for ... -
Fourier transform-based method for quantifying the three-dimensional orientation distribution of fibrous units
(Peer reviewed; Journal article, 2024)Several materials and tissues are characterized by a microstructure composed of fibrous units embedded in a ground matrix. In this paper, a novel three-dimensional (3D) Fourier transform-based method for quantifying the ... -
Fracture and fragmentation of blast-loaded laminated glass: An experimental and numerical study
(Journal article; Peer reviewed, 2019)In this study, we use the explicit finite element method in combination with higher order elements and 3D node splitting to simulate fracture and fragmentation of blast-loaded laminated glass. Node splitting is a modelling ... -
Fracture and negative Poisson’s ratio of novel spanned-fullerenes nanotube networks under tension
(Journal article; Peer reviewed, 2013)Carbon-based nanomaterials have attracted significant attention due to their unique physical properties. In this study, various multi-dimensional graphitic architectures are constructed by spanning fullerenes with carbon ... -
Fracture in wood of Norway spruce. Experimental and numerical study.
(Doctoral theses at NTNU;2020:314, Doctoral thesis, 2021)In this thesis, the fracture mechanical properties of wood from Norway spruce at the scale of the structural component were investigated. For that purpose, a detailed analysis of the displacement fields in the zone of the ... -
Fracture mechanisms in largely strained solids due to surface instabilities
(Journal article; Peer reviewed, 2020)The effect of self-contacting surface defects generated by largely compressing metals on the ductile-to-brittle transition observed in metallic structures is investigated. In order to analyse such an effect, a finite element ... -
Fracture of micrometre-sized Ni/Au coated polymer particles
(Journal article; Peer reviewed, 2009)Deformation and fracture of individual micrometre-sized Ni/Au coated polymer particles have been studied by a nanoindentation-based flat punch method. A wide range of test conditions has been applied to deform the coated ... -
Fragility Assessment of Transportation Infrastructure Systems Subjected to Earthquakes
(Chapter, 2018)This paper provides a review of the different methodologies for the fragility assessment of critical transportation infrastructure subjected to earthquake excitations with emphasis placed on geotechnical effects. Available ... -
Fragility of transport assets exposed to multiple hazards: State-of-the-art review toward infrastructural resilience
(Journal article; Peer reviewed, 2019)Vulnerability is a fundamental component of risk and its understanding is important for characterising the reliability of infrastructure assets and systems and for mitigating risks. The vulnerability analysis of infrastructure ... -
Fragmentation of metallic materials during impact
(Master thesis, 2010)Studies on shear-plug formation and on double-layered steel plates impacted by blunt-nosed hardened steel projectiles showed that at certain velocities against certain targetplates the projectiles shattered upon impact. ... -
Fragmentation of Metallic Materials During Impact: Numerical Studies of Fragmentation in the Taylor Test
(Master thesis, 2012)This thesis is written in relation to the current research at SIMLab in the field of impact engineering. An overall objective is to establish a general numerical model for predicting and simulating the fragmentation process ... -
Fragmentering av metalliske materialer i forbindelse med støt
(Master thesis, 2011) -
A framework for classification of snow- and icephobicity
(Peer reviewed; Journal article, 2020)For decades, there has been no proper thermodynamic definition of icephobicity. Some claim icephobic properties at an adhesion lower than 100 kPa, whereas others claim it when the accretion of ice is significantly prolonged. ... -
A framework for predicting the local stress-strain behaviors of additively manufactured multiphase alloys in the sequential layers
(Peer reviewed; Journal article, 2022)The additive manufacturing (AM) process often results in non-uniform microstructure and different mechanical properties in sequential layers, impacting the overall performance of the AM-ed component. However, it is extremely ... -
Freeze-Warping Box - Measuring the Deflection of a Composite Specimen
(Master thesis, 2018)The freeze-warping box is used to measure the bi-material deflection of a small composite specimen beam during a freeze-thaw cycle. This bi-material deflection is caused by the thermal mismatch between the composite's ... -
Freezing induced stresses in concrete-steel composite beams and effect of air voids
(Chapter, 2016)The thermal expansion match between concrete and steel is lost when freezing occurs, owing to enhanced shrinkage caused by cryosuction in the pore solution and the high coefficient of thermal expansion (CTE) of ice. Freezing ... -
Friedel's salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution
(Journal article; Peer reviewed, 2017)Thermogravimetric analysis (TGA), powder X-ray diffraction (XRD) and thermodynamic modelling have been used to obtain Friedel's salt profiles for saturated mortar cylinders exposed to a 2.8 M NaCl solution. Comparison of ... -
Friksjon mellom trelameller i spenningslaminerte tredekker
(Master thesis, 2018)Hensikten med oppgaven var å få mer kunnskaper rundt friksjonskoeffisienten i tverrspente dekker, spesielt med fokus på oppspenningens påvirkning. Det ble derfor gjennomført 120 friksjonsforsøk, hvor størrelsen og varigheten ... -
From Design to Assembly: Robotic Fabrication of Timber Structures using Traditional Carpentry Joints
(Master thesis, 2023)Bygg- og anleggsbransjen har et behov for, og en mulighet til, digitalisering. Ved å benytte digitale verktøy som computer-aided manufacturing (CAM) og computer-aided design (CAD) kan produksjonen økes ved å effektivisere ... -
From Design to Assembly: Robotic Fabrication of Timber Structures using Traditional Carpentry Joints
(Master thesis, 2023)Bygg- og anleggsbransjen har et behov for, og en mulighet til, digitalisering. Ved å benytte digitale verktøy som computer-aided manufacturing (CAM) og computer-aided design (CAD) kan produksjonen økes ved å effektivisere ...