Institutt for bygg- og miljøteknikk: Nye registreringer
Viser treff 721-740 av 4708
-
Numerical study of discharge adjustment effects on reservoir morphodynamics and flushing efficiency: An outlook for the unazuki reservoir, Japan
(Journal article; Peer reviewed, 2021) -
Prediction of vibration from tunnel blasting using machine learning
(Master thesis, 2022)Blasting is the cheapest and most effective way of constructing the tunnel. However, it produces many undesirable consequences from blasting. Some of them are not so important but with increasing, tunneling practice in ... -
Hydromorfologisk klassifisering av elver og økologisk relevans - testing av metode
(SINTEF Rapport, Research report, 2020)Denne rapporten beskriver utprøving av en foreslått metode for hydromorfologisk klassifisering av elver i utvalgte vannforekomster. Metoden inneholder bruk av 8 indikatorer for morfologi, 4 indikatorer for barrierer og 8 ... -
Design and sustainability analyses of road base layers stabilized with traditional and nontraditional additives
(Peer reviewed; Journal article, 2022)Base course is an important structural layer of a road pavement which plays a vital role in transferring and distributing the traffic loadings to the subgrade. The base usually comprises unbound materials, which can be ... -
High-performance polymer 3D printing – Open-source liquid cooled scalable printer design
(Peer reviewed; Journal article, 2022)To print high-performance polymers, a stable running printer that can reach high temperatures is needed. There is currently a lack of low-cost solutions that allow manipulation of process parameters and expansion of sensors ... -
Corrective and Preventive Action Plan (CAPA) for Disputes in Construction Projects: A Norwegian Perspective
(Peer reviewed; Journal article, 2022)The consensus in the Norwegian construction industry is that the projects are characterized by conflicts. Because unresolved disputes that reach courts take time and resources to be solved, this leads to lost productivity ... -
New Micromobility Means of Transport: An Analysis of E-Scooter Users’ Behaviour in Trondheim
(Peer reviewed; Journal article, 2022)Negative effects of a massive use of cars, such as congestion, air pollution, noise, and traffic injuries, are affecting the cities everywhere. Recently introduced shared vehicles, such as e-scooters and electric bicycles, ... -
Microwave Heating as an Innovative Road Maintenance Technology: Aging Effect on Binder and Feasibility Evaluation
(Peer reviewed; Journal article, 2022)The microwave heating/healing technique is regarded as a green maintenance approach for asphalt pavements thanks to its promising environmental and economic benefits. However, the main concern about this technology is ... -
Formation and growth of multiple, distinct ice lenses in frost heave
(Peer reviewed; Journal article, 2022)This paper presents a fully coupled thermo-hydro-mechanical (THM) modelwhich simulates frost heave in fully saturated soils. The model is able tosimulate the formation and growth of multiple distinct ice lenses. The ... -
Ice rose diagrams for probabilistic characterization of the ice drift behavior in the Beaufort Sea
(Journal article; Peer reviewed, 2022) -
Integrated optimization of charger deployment and fleet scheduling for battery electric buses
(Peer reviewed; Journal article, 2022)Battery electric buses (BEBs) are considered effective options for sustainable mobility. Their operational efficiency is significantly influenced by the deployment of charging infrastructure and the scheduling of the bus ... -
Pedestrians’ and bicyclists’ route choice during winter conditions
(Peer reviewed; Journal article, 2022)This study investigates the association between surface conditions and pedestrians’ and bicyclists’ route choices during winter. We analyzed responses from two surveys in which pedestrians and bicyclists answered questions ... -
Development of Combined Load Spectra for Offshore Structures Subjected to Wind, Wave, and Ice Loading
(Peer reviewed; Journal article, 2022)Fixed offshore wind turbines continue to be developed for high latitude areas where not only wind and wave loads need to be considered but also moving sea ice. Current rules and regulations for the design of fixed offshore ... -
Load and Deformation Relations of Placed Riprap Model with Toe Support
(Chapter, 2022)Abstract: Rockfill dams are hydraulic structures of major importance that can be exposed to extreme flood events, leading to overtopping processes. These phenomena erode and weaken their structural and geotechnical stability. ... -
Riprap Protection Exposed to Overtopping Phenomena: A Review of Laboratory Experimental Models
(Peer reviewed; Journal article, 2022)There are increasing demands from dam safety regulations and guidelines to upgrade the rockfill dams, especially in Norway where over 180 large rockfill dams are present. To protect the hydraulic structure against overtopping ... -
Quantitative Assessment of Road Performance of Recycled Asphalt Mixtures Incorporated with Steel Slag
(Peer reviewed; Journal article, 2022)Circular utilization of reclaimed asphalt pavement (RAP) has received extensive attention for its economic and environmental benefits. The application of recycled asphalt mixtures (RAM) in the upper layer of asphalt pavement ... -
Evaluation of Target Value Delivery and Opportunity Management as Complementary Practices
(Peer reviewed; Journal article, 2021)Opportunity management and Target Value Delivery (TVD) have both been studied extensively but separately. The two approaches have been presented as solutions for increasing value in a project for the owner and users. ... -
Technical note: Graph-theory-based heuristics to aid in the implementation of optimized drinking water network sectorization
(Peer reviewed; Journal article, 2022)Drinking water distribution networks form an essential part of modern-day critical infrastructure. Sectorizing a network into district metered areas is a key technique for pressure management and water loss reduction. ... -
Thermal Layer Design in Fused Filament Fabrication
(Peer reviewed; Journal article, 2022)The current limitations of design for additive manufacturing (DfAM) are the state of knowledge on materials and the effects of production parameters. As more engineering-grade polymers become available for fused filament ... -
Nordic hydrological frontier in the 21st century
(Peer reviewed; Journal article, 2022)The 21st century has brought new challenges and opportunities and has also increased demands on the Nordic hydrological community. Our hydrological science focus and approaches need rethinking and adaptation to the changing ...