V2X-Based Mobile Localization in 3D Wireless Sensor Network
Javed, Iram; Tang, Xianlun; Shaukat, Kamran; Sarwar, Muhammed Umer; Alam, Talha Mahboob; Hameed, Ibrahim A.; Saleem, Muhammad Asim
Peer reviewed, Journal article
Published version
Åpne
Permanent lenke
https://hdl.handle.net/11250/3053737Utgivelsesdato
2021Metadata
Vis full innførselSamlinger
- Institutt for IKT og realfag [599]
- Publikasjoner fra CRIStin - NTNU [38631]
Sammendrag
In a wireless sensor network (WSN), node localization is a key requirement for many applications. The concept of mobile anchorbased localization is not a new concept; however, the localization of mobile anchor nodes gains much attention with the advancement in the Internet of things (IoT) and electronic industry. In this paper, we present a range-free localization algorithm for sensors in a three-dimensional (3D) wireless sensor networks based on flying anchors. The nature of the algorithm is also suitable for vehicle localization as we are using the setup much similar to vehicle-to-infrastructure- (V2I-) based positioning algorithm. A multilayer C-shaped trajectory is chosen for the random walk of mobile anchor nodes equipped with a Global Positioning System (GPS) and broadcasts its location information over the sensing space. The mobile anchor nodes keep transmitting the beacon along with their position information to unknown nodes and select three further anchor nodes to form a triangle. The distance is then computed by the link quality induction against each anchor node that uses the centroid-based formula to compute the localization error. The simulation shows that the average localization error of our proposed system is 1.4 m with a standard deviation of 1.21 m. The geometrical computation of localization eliminated the use of extra hardware that avoids any direct communication between the sensors and is applicable for all types of network topologies. V2X-Based Mobile Localization in 3D Wireless Sensor Network