Vis enkel innførsel

dc.contributor.advisorHaavi, Thomas
dc.contributor.advisorNicolaisen, Tor Erik
dc.contributor.authorLøvås, Åsmund
dc.contributor.authorSukurica, Adnan
dc.contributor.authorØyen, Christian Assev
dc.date.accessioned2022-07-08T17:19:44Z
dc.date.available2022-07-08T17:19:44Z
dc.date.issued2022
dc.identifierno.ntnu:inspera:106261819:112133252
dc.identifier.urihttps://hdl.handle.net/11250/3004141
dc.descriptionFull text not available
dc.description.abstractFor å kutte i klimautslippene til bygge-bransjen ble det startet opp et satsingsprosjekt for resirkulering av trematerialer. Prosjektet har navn SirkTRE og drives av firmaet OmTRE. SirkTRE sitt mål er å kutte utslippene fra bygge-bransjen med 0.5 millioner tonn CO2 årlig ved hjelp av å gjenbruke retur-tre i nye byggeprosjekter. For at dette skal være mulig må det utarbeides metoder og prosesser for å ta brukt treverk tilbake i brukbar stand. Denne bachelorrapporten tar for seg problemsstillingen «Hvordan identifisere og markere feste-elementer som spiker og skruer fra retur-tremateriale.», og har som mål og utarbeide et forlag for en trygg og effektiv måte og identifisere, markere spiker i retur-tre på. Bachelor-gruppen har benyttet kunnskapen som vi har opparbeidet på maskiningeniørstudiet, for å komme frem til et konsept. Gjennom prosjektarbeidet har flere mulige måter å identifisere metall på blitt analysert og vurdert. Resultatet er et system som benytter induktive sensorer for å oppdage metall og markeringsspray for merking. Disse merkene kan benyttes i videre bearbeiding for å fjerne festeelementene.
dc.description.abstractIn order to cut the climate emissions from the construction industry, an investment project was started with the purpose of recycling wood materials. The project is called SirkTRE and is run by OmTRE. SirkTRE has as a goal to cut emissions from the construction industry by 0.5 million tons of CO2 annually, by recycling timber in new construction projects. To achieve this goal methods and processes must be developed to bring the lumber back into usable condition. This bachelor's report addresses the issue of "How to identify and mark fasteners such as nails and screws, from wood material". The project aims to design a safe and efficient way to identify and mark nails and screws in the used lumber. The knowledge accumulated from studying mechanical engineering has been a significant factor in developing this concept. During this process several possible ways of identifying metal have been analyzed and evaluated. The result is a system that uses inductive sensors to detect metal and marking spray to mark the location of the element. These marks can be further used in processing to remove nails and screws.
dc.languagenob
dc.publisherNTNU
dc.titleIdentifisering og markering av festeelementer i returtre
dc.typeBachelor thesis


Tilhørende fil(er)

FilerStørrelseFormatVis

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel