Blar i Publikasjoner fra CRIStin - NTNU på tittel
Viser treff 20933-20952 av 37290
-
Measuring the suicidal mind: The ‘open source’ Suicidality Scale, for adolescents and adults
(Peer reviewed; Journal article, 2023)Clinicians are expected to provide accurate and useful mental health assessments, sometimes in emergency settings. The most urgent challenge may be in calculating suicide risk. Unfortunately, existing instruments often ... -
Measuring the suicidal mind: The ‘open source’ Suicidality Scale, for adolescents and adults
(Peer reviewed; Journal article, 2023)Clinicians are expected to provide accurate and useful mental health assessments, sometimes in emergency settings. The most urgent challenge may be in calculating suicide risk. Unfortunately, existing instruments often ... -
Measuring the thermal conductivity of membrane and porous transport layer in proton and anion exchange membrane water electrolyzers for temperature distribution modeling
(Journal article; Peer reviewed, 2019)Water electrolyzers that use a membrane electrolyte between the electrodes are a promising technology towards mass production of renewable hydrogen. High power setups produce a lot of heat which has to be transported through ... -
Measuring the visual in the museum: Social meaning mapping as a means of capturing more than meets the eye.
(Chapter, 2020)Visitors’ visual engagement with the museum collection has been treated as a proxy for their learning. Researchers use a number of methods to measure this engagement, including timing and tracking studies for which they ... -
Measuring Throughput Times in Wood Component Production: A Case Study
(Journal article; Peer reviewed, 2018)An increasing number of manufacturing companies acknowledge the importance of flow efficiency. As an important key performance indicator in lean implementation processes, being able to measure the throughput time of products ... -
Measuring, Modeling, and Reproducing Material Appearance from Specular Profile
(Journal article; Peer reviewed, 2019)A method is proposed for measuring, modeling, and reproducing material appearance from the specular profile representing reflectance distribution around a specular highlight. Our method is aimed at opaque materials with a ... -
Meat or mitigation? That's the question: Storylines in the Norwegian agricultural policy discourse on meat reduction
(Peer reviewed; Journal article, 2023)Ruminant meat (beef and lamb) is recognised as the food with the largest environmental impact in terms of greenhouse gas emissions. Yet reducing meat consumption and production is controversial. Resistance to change has ... -
Mecha-Media: How Are Androids, Cyborgs, and Robots Presented and Received Through the Media?
(Chapter, 2017)How are robots, androids and cyborgs presented and received in the media? This chapter applies a social media analysis to this question by using empirical research on news stories that feature robotic technologies to see ... -
Mechanical Activation of Olivine
(Peer reviewed; Journal article, 2006)This paper investigates how mechanical activation of olivine can increase the mineral’s surface reactivity, and illustrates how such technology can give rise to new or improved olivine products. The olivine material used ... -
Mechanical analysis of drilling riser based on pipe-in-pipe model
(Journal article, 2021)Due to the presence of a drill string inside drilling risers, the mechanical analysis becomes somewhat challenging which has attracted attention from design engineers and drilling operators. The purpose of this study is ... -
Mechanical and metallurgical properties of co2 laser beam inconel 625 welded joints
(Peer reviewed; Journal article, 2021)In the frame of the circular economy, welding of Ni-based superalloys has gained increasing importance when applied, for instance, to repairing highly expensive components widely used in strategical sectors, such as the ... -
Mechanical and Thermal Properties of Carboxymethyl fibers (CMF)/PVA based nanocomposite membranes
(Peer reviewed; Journal article, 2020)Carboxymethyl fibers (CMF) of cellulose are renewable biopolymer and have shown strong reinforcing properties when added to a compatible polymer matrix. The objective of this study was to investigate the effect of CMF on ... -
Mechanical and Tribological Properties of Al2O3-TiC Composite Fabricated by Spark Plasma Sintering Process with Metallic (Ni, Nb) Binders
(Journal article; Peer reviewed, 2018)Al2O3-10TiC composites were fabricated through the powder metallurgical process (mechanical milling combined with spark plasma sintering) with the addition of Ni/Nb as metallic binders. The effect of binder addition (Ni/Nb) ... -
Mechanical and tribological properties of injection molded zirconia-alumina for orthopedic implants
(Journal article, 2022)Ceramics have gained great attention for hip and knee arthroplasty surgical procedures due to their ability to guarantee long-life performance in patients and are considered an alternative to existing metal systems. In ... -
Mechanical behavior and collagen structure of degenerative mitral valve leaflets and a finite element model of primary mitral regurgitation
(Peer reviewed; Journal article, 2023)Degenerative mitral valve disease is the main cause of primary mitral regurgitation with two phenotypes: fibroelastic deficiency (FED) often with localized myxomatous degeneration and diffuse myxomatous degeneration or ... -
Mechanical behavior of gas metal arc AA6082-T6 weldments
(Journal article; Peer reviewed, 2019)A series of experiments have been conducted to determine the mechanical properties of AA6082-T6 plates which have been joined by means of the Gas Metal Arc technique. Hardness Vickers tests, bending tests, tensile tests, ... -
Mechanical behavior of metallic fiber-reinforced adhesive under dynamic loading
(Peer reviewed; Journal article, 2020)The mechanical behavior of metallic fiber reinforced adhesively bonded Single Lap Joints (SLJ) under dynamic loading has been studied. The effect of different fiber spacing along the joint width on the strength of SLJs was ... -
Mechanical behavior of selective laser melted 316L stainless steel
(Journal article; Peer reviewed, 2017)The tensile, fracture, and fatigue crack growth properties of 316L stainless steel (SS) produced using the selective laser melting (SLM) technique were evaluated and compared with those of conventionally manufactured (CM) ... -
Mechanical characterization of aluminum alloys for arctic structures application
(Journal article, 2020)Due to its low specific mass, mechanical resistance comparable to that of mild structural steels, the low maintenance cost and good corrosion resistance, aluminum alloys are well suited for the production of offshore ... -
Mechanical characterization of composite coatings formed by reactive detonation spraying of titanium
(Journal article; Peer reviewed, 2017)The structure and mechanical properties of the coatings formed by reactive detonation spraying of titanium in a wide range of spraying conditions were studied. The variable deposition parameters were the nature of the ...