Blar i Publikasjoner fra CRIStin - NTNU på tittel

Viser treff 14310-14329 av 37304

    • FunHoP analysis reveals upregulation of mitochondrial genes in prostate cancer 

      Rise, Kjersti; Tessem, May-Britt; Drabløs, Finn; Rye, Morten Beck (Peer reviewed; Journal article, 2022)
      Mitochondrial activity in cancer cells has been central to cancer research since Otto Warburg first published his thesis on the topic in 1956. Although Warburg proposed that oxidative phosphorylation in the tricarboxylic ...

    • FunHoP: Enhanced Visualization and Analysis of Functionally Homologous Proteins in Complex Metabolic Networks 

      Rise, Kjersti; Tessem, May-Britt; Drabløs, Finn; Rye, Morten Beck (Journal article; Peer reviewed, 2021)
      Cytoscape is often used for visualization and analysis of metabolic pathways. For example, based on KEGG data, a reader for KEGG Markup Language (KGML) is used to load files into Cytoscape. However, although multiple genes ...

    • Fur colour in the Arctic fox: genetic architecture and consequences for fitness 

      Tietgen, Lukas; Hagen, Ingerid Julie; Kleven, Oddmund; Di Bernardi, Cecilia; Kvalnes, Thomas; Norén, Karin; Hasselgren, Malin; Wallen, Johan Fredrik; Angerbjörn, Anders; Landa, Arild; Eide, Nina Elisabeth; Flagstad, Øystein; Jensen, Henrik (Journal article; Peer reviewed, 2021)
      Genome-wide association studies provide good opportunities for studying the genetic basis of adaptive traits in wild populations. Yet, previous studies often failed to identify major effect genes. In this study, we used ...

    • Furnace Atmosphere and Dissolved Hydrogen in Aluminium 

      Syvertsen, Martin; Kvithyld, Anne; Gundersen, Eilif; Johansen, Inge; Engh, Thorvald Abel (Peer reviewed; Journal article, 2019)
      Hydrogen solubility is much higher in liquid than in solid aluminium. Therefore, if the hydrogen concentration in liquid aluminium is too high prior to solidification, there is high risk of gas porosity formation during ...

    • Fusarium: more than a node or a foot-shaped basal cell 

      Crous, Pedro W.; Lombard, L.; Sandoval-Denis, M; Seifert, K.A; Schroers, H.-J; Chavern, P; Gené, J; Guarro, J; Hirooka, Y; Bensch, K; Kema, G.H.J; Lamprecht, S.C.; Cai, L.; Rossman, A-Y.; Stadler, M; Summerbell, R.C.; Taylor, J.W; Ploch, S.; Visagie, C.M; Yilmaz, N; Frisvad, J.C; Abdel-Azeem, A.M; Abdollahzadeh, J.; Abdolrasouli, A.; Akulov, A.; Alberts, J.F; Araujo, J.P.M; Ariyawansa, H.A.; Bakshshi, M; Bendiksby, Mika; Ben Hadj Amor, A.; Bezerra, J.D.P.; Boekhout, T.; Câmara, M.P.S.; Carbia, M.; Cardinali, G.; Castañeda-Ruiz, R.F.; Celis, A.; Chaturvedi, V.; Collemare, J.; Croll, D.; Damm, U.; Decock, C.A.; de Vries, R.P; Ezekiel, C.N.; Fan, X.L; Zamora, Juan Carlos; Zare, R; Zhang, C.L.; Thines, M. (Peer reviewed; Journal article, 2021)
      Recent publications have argued that there are potentially serious consequences for researchers in recognising distinct genera in the terminal fusarioid clade of the family Nectriaceae. Thus, an alternate hypothesis, namely ...

    • Fused 3-Stage Image Segmentation for Pleural Effusion Cell Clusters 

      Ma, Sike; Zhao, Meng; Wang, Hao; Shi, Fan; Sun, Xuguo; Chen, Shengyong; Dai, Hong-Ning (Chapter, 2021)
      The appearance of tumor cell clusters in pleural effusion is usually a vital sign of cancer metastasis. Segmentation, as an indispensable basis, is of crucial importance for diagnosing, chemical treatment, and prognosis ...

    • Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems 

      Daminabo, Samuel C.; Goel, Saurav; Grammatikos, Sotirios; Nezhad, Hamed Yazdani; Thakur, Vijay Kumar (Peer reviewed; Journal article, 2020)
      While the developments of additive manufacturing (AM) techniques have been remarkable thus far, they are still significantly limited by the range of printable, functional material systems that meet the requirements of a ...

    • Fused Filament Fabrication 3D printed polypropylene/ alumina nanocomposites: Effect of filler loading on the mechanical reinforcement 

      Vidakis, Nectarios; Petousis, Markos; Velidakis, Emanuel; Mountakis, Nikolaos; Fischer-Griffiths, Peder Erik; Grammatikos, Sotirios; Tzounis, Lazaros (Peer reviewed; Journal article, 2022)
      Three-dimensional (3D) printed Polypropylene (PP) reinforced with aluminum oxide (Al2O3) nanoparticles (NPs) were developed and fully characterized in this study. Nanocomposite filaments were produced initially following ...

    • Fused filament fabrication-4d-printed shape memory polymers: A review 

      Valvez, Sara; Reis, Paulo N. B.; Susmel, Luca; Berto, Filippo (Peer reviewed; Journal article, 2021)
      Additive manufacturing (AM) is the process through which components/structures are produced layer-by-layer. In this context, 4D printing combines 3D printing with time so that this combination results in additively ...

    • Future changes in consumption: The income effect on greenhouse gas emissions 

      Bjelle, Eivind Lekve; Wiebe, Kirsten Svenja; Többen, Johannes; Tisserant, Alexandre; Ivanova, Diana; Vita, Gibran; Wood, Richard (Peer reviewed; Journal article, 2021)
      The scale and patterns of household consumption are important determinants of environmental impacts. Whilst affluence has been shown to have a strong correlation with environmental impact, they do not necessarily grow at ...

    • Future climate change impacts on residential heating and cooling degree days in Serbia 

      Jankovic, Aleksandar; Podrascanin, Zorica; Djurdjevic, Vladimir (Journal article; Peer reviewed, 2019)
      This study analyzes the potential changes of residential heating and cooling degree days (HDD and CDD) in the 21st century over Serbia with the regional climate model (RCM) EBU-POM under two different forcing scenarios ...

    • Future designs of tertiary dance education: Scanning the field for decolonizing potentials in a major change project at the Department for Dance Pedagogy at Stockholm University of the Arts 

      Østern, Tone Pernille; Reppen, Camilla; Lion, Katarina; Lundmark, Katarina; Sjöstedt Edelholm, Elisabet (Peer reviewed; Journal article, 2021)
      Abstract This performative hybrid research and development project contributes knowledge about the decolonizing potentials and challenges that are articulated through an initial scanning of the dance pedagogical field as ...

    • Future directions and priorities for Arctic bryophyte research. 

      Lewis, Lily R.; Ickert-Bond, Stefanie M.; Biersma, Elisabeth M.; Convey, Peter; Goffinet, Bernard; Hassel, Kristian; Kruijer, Hans J.D.; La Farge, Catherine; Metzgar, Jordan; Stech, Michael; Villarreal, Juan Carlos; McDaniel, Stuart F. (Journal article; Peer reviewed, 2017)
      The development of evidence-based international strategies for the conservation and management of Arctic ecosystems in the face of climate change is hindered by critical knowledge gaps in Arctic floristic diversity and ...

    • Future Directions in Image Quality 

      Amirshahi, Seyed Ali; Pedersen, Marius (Journal article; Peer reviewed, 2019)
      With the advancements made in the field of image processing and computer vision, the last few decades have seen an increase in studies focused on image quality assessment. While this has resulted in the introduction of ...

    • Future dust concentration over the Middle East and North Africa region under global warming and stratospheric aerosol intervention scenarios 

      Mousavi, Seyed Vahid; Karami, Khalil; Tilmes, Simone; Muri, Helene Østlie; Xia, Lili; Rezaei, Abolfazl (Journal article, 2022)

    • Future dust concentration over the Middle East and North Africa region under global warming and stratospheric aerosol intervention scenarios 

      Mousavi, Seyed Vahid; Karami, Khalil; Tilmes, Simone; Muri, Helene Østlie; Xia, Lili; Rezaei, Abolfazl (Peer reviewed; Journal article, 2023)
      The Middle East and North Africa (MENA) region is the dustiest region in the world, and understanding the projected changes in the dust concentrations in the region is crucial. Stratospheric aerosol injection (SAI) ...

    • Future emerging technologies in the wind power sector: a European perspective 

      Watson, Simon; Moro, Alberto; Reis, Vera; Baniotopoulos, Charalampos; Barth, Stephan; Bartoli, Gianni; Bauer, Florian; Boelman, Elisa; Bosse, Denis; Cherubini, Antonello; Croce, Alessandro; Fagiano, Lorenzo; Fontana, Marco; Gambier, Adrian; Gkoumas, Konstantinos; Golightly, Christopher; Latour, Mikel Iribas; Jamieson, Peter; Kaldellis, John; Macdonald, Andrew; Murphy, Jimmy; Muskulus, Michael; Petrini, Francesco; Pigolotti, Luca; Rasmussen, Fleming; Schild, Philippe; Schmehl, Roland; Stavridou, Nafsika; Tande, John Olav Giæver; Taylor, Nigel A.S.; Telsnig, Thomas; Wiser, Ryan (Journal article; Peer reviewed, 2019)
      This paper represents an expert view from Europe of future emerging technologies within the wind energy sector considering their potential, challenges, applications and technology readiness and how they might evolve in the ...

    • Future energy pathways for a university campus considering possibilities for energy efficiency improvements 

      Nord, Natasa; Sandberg, Nina Holck; Ngo, Huy; Nesgård, Eirik; Woszczek, Aleksandra; Tereshchenko, Tymofii; Næss, Jan Sandstad; Brattebø, Helge (Journal article; Peer reviewed, 2019)
      The study aimed to show in a systematic way possible energy efficiency measures that would decrease the total energy use at the university campus in Trondheim, Norway. The entire study was developed in close collaboration ...

    • The future is present: Prefiguration in policy and technology experimentation 

      Haugland, Bård Torvetjønn (Peer reviewed; Journal article, 2023)
      The article adds to the theorisation of temporality within sustainability transitions by introducing the concept of prefiguration. Through two transport-related case studies, one technology experiment and one policy ...

    • The Future of DNA Barcoding: Reflections from Early Career Researchers 

      Grant, Danielle M.; Brodnicke, Ole Bjørn; Evankow, Ann; Ferreira, André O.; Fontes, João T.; Hansen, Aslak Kappel; Jensen, Mads Reinholdt; Kalaycı, Tuğba Ergül; Leeper, Alexandra Eve Joyce; Patil, Shalaka Kiran; Prati, Sebastian; Reunamo, Anna; Roberts, Aradhana J; Shigdel, Rajesh; Tyukosova, Valentina; Bendiksby, Mika; Blaalid, Rakel; Costa, Filipe O.; Hollingsworth, Peter M.; Stur, Elisabeth; Ekrem, Torbjørn (Journal article; Peer reviewed, 2021)
      Over the last two decades, the use of DNA barcodes has transformed our ability to identify and assess life on our planet. Both strengths and weaknesses of the method have been exemplified through thousands of peer-reviewed ...