dc.contributor.advisor | Rølvåg, Terje | nb_NO |
dc.contributor.advisor | Sivertsen, Ole Ivar | nb_NO |
dc.contributor.advisor | Skjølingstad, Ole | nb_NO |
dc.contributor.advisor | Ahmad, Qazi Sohail | nb_NO |
dc.contributor.author | Moi, Morten Benestad | nb_NO |
dc.date.accessioned | 2014-12-19T12:28:37Z | |
dc.date.available | 2014-12-19T12:28:37Z | |
dc.date.created | 2013-09-09 | nb_NO |
dc.date.issued | 2013 | nb_NO |
dc.identifier | 646731 | nb_NO |
dc.identifier | ntnudaim:9029 | nb_NO |
dc.identifier.uri | http://hdl.handle.net/11250/241757 | |
dc.description.abstract | This thesis studies the methods needed to create a web based application to remotely customize a CAD model. This includes customizing a CAD model by using a graphical user interface to be able to remotely control the inputs to- and outputs from the model in NX, and to get the result sent back to the user. Using CAD systems such as NX requires intensive training, is often a slow process and gives a lot of room for errors. An intuitive, simple user interface will eliminate the need for CAD training or CAD experience. The time used can be reduced by creating smart, parameterizable models that easily can be customized to the user's requirements. Built in rules in the model and the user interface can decrease possibility for errors and help maintain the design intent. By creating a web based solution the user does not need to have a CAD system installed or licensed on its system to update the model and changes can be made on the go.The result of the thesis is a solution where the user can install an application that can connect to a server that can update a CAD model in NX and send the result back to the user. The method used in this solution is presented in the thesis. | nb_NO |
dc.language | eng | nb_NO |
dc.publisher | Institutt for produktutvikling og materialer | nb_NO |
dc.title | Web Based Customized Design | nb_NO |
dc.type | Master thesis | nb_NO |
dc.source.pagenumber | 130 | nb_NO |
dc.contributor.department | Norges teknisk-naturvitenskapelige universitet, Fakultet for ingeniørvitenskap og teknologi, Institutt for produktutvikling og materialer | nb_NO |