Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 2977-2996 av 3978
-
Proposed aspects for evaluation of the value of spaces in historic buildings
(Journal article; Peer reviewed, 2015)There is an unrealised potential for new uses of cultural heritage sites. The purpose of this paper is to identify evaluation aspects for assessing the potential of new uses for cultural heritage places and test the proposed ... -
Proposed Measures for Cost Reduction in the NTNU Campus Collection Project
(Master thesis, 2022)Denne masteroppgaven er et samarbeid med Statsbygg som omhandler NTNU Campussamlingsprosjektet. Prosjektet styres etter prosjektstrategien Design to Cost (DtC) som har satt en absolutt kostnadsramme på 11.032 milliarder ... -
Proposing a novel approach for testing complex medical task trainer prototypes
(Chapter, 2020)Using the Wayfaring model in the Fuzzy Front End of product development can aid designers in uncovering and answering ambiguous design questions. However, it does not aid the challenge of combining insights and concepts ... -
Prosessovervåkning og KPI's
(Master thesis, 2010)Overvåking av forskjellige prosesser er en essensiell del i et fremtidsrettet og konkurransedyktig produksjonssystem. Denne overvåkingen er nært knyttet til bedriftens vedlikeholdsorganisasjon, som kan benytte overvåking ... -
Prosjektering av testrigg brukt i teknologikvalifisering av undervanns vibrasjonsdempesystem
(Bachelor thesis, 2023)Denne rapporten dokumenterer utviklingsprosessen og resultatene av et bachelorprosjekt med mål om å designe og produsere en ramme for testing av Momentum Technologies’ vibrasjonsdempere. Rammen skal brukes i et ... -
Prosjektledelse i kulturbransjen
(Master thesis, 2022)Denne masteroppgaven tar for seg tematikken rundt prosjektledelse i kulturbransjen. Kulturbransjen er en veldig fleksibel og kreativ bransje som i stor grad er basert på erfaringer da det er få utdanninger tilgjengelig, ... -
Prosjektleders rolle hos Forsvarsbygg - En analyse av prosjektleders ansvar, arbeidsfordeling og tilpasning til hvert prosjekt
(Master thesis, 2015)Masteroppgaven er skrevet i samarbeid med Forsvarsbygg (FB) og bygger delvis på en prosjektoppgave fra høsten 2014. Målet har vært å kartlegge prosjektleders arbeidsoppgaver, tidsbruk, om samme oppgave utføres flere ganger, ... -
Prosjektmodeller og prosjekteierstyring i statlige virksomheter
(Concept rapport;, Research report, 2016)Denne studien ser på styringen av store statlige prosjekter fra fagdepartement og ansvarlig virksomhet (selskap) sin side, i fem ulike sektorer. Vi finner at bevisstheten om og kompetansen på styring av statlige prosjekter ... -
The Prospective of Artificial Neural Network (ANN’s) Model Application to Ameliorate Management of Post Disaster Engineering Projects
(Journal article, 2022)Currently and under the COVID-19 which is considered as a kind of disaster or even any other natural or manmade disasters, this study was confirmed to be important especially when the society is proceeding to recover and ... -
Protobooth: Gathering and analyzing data on prototyping in early-stage engineering design projects by digitally capturing physical prototypes
(Peer reviewed; Journal article, 2021)Aiming to help researchers capture output from the early stages of engineering design projects, this article presents a new research tool for digitally capturing physical prototypes. The motivation for this work is to ... -
Prototype development of a drone-based cleaning solution for PV panels in arid environments
(Bachelor thesis, 2020)Abstract will be available on 2023-05-20 -
Prototype Experiments: Strategies and Trade-offs
(Journal article; Peer reviewed, 2017)Throughout the whole product development process, there is always a question on whether the proposed product is “up to its task”, and often it is up to the engineer or designer to answer these questions. In many cases, ... -
Prototyping a Mechanical Lung for Human Patient Simulators - Concept Development to Facilitate Medical Ventilation Training
(Master thesis, 2019)Denne masteroppgaven tar for seg tidlig-fasen av et utviklingprosjekt for en mekanisk lunge, for en pasient simulator. Prosjektet er utført på TrollLabs på NTNU, og oppgaven er gitt av Laerdal Medical. De had har et behov ... -
Prototyping an Experimental Setup for Understanding Affective Response in a Ship Bridge Scenario
(Master thesis, 2016)This document concerns the process and outcome of a master project undertaken at the Department of Engineering Design and Materials (IPM) at the Norwegian University of Science and Technology (NTNU) in the fall of 2015. ... -
Prototyping an Experimental Setup to Quantify Neurophysiological Response during In Situ Interaction Experiments
(Master thesis, 2020)Denne masteroppgaven beskriver prosessen og resultatene av et masterprosjekt utført ved institutt for maskinteknikk og produksjon (MTP) ved Norges teknisk-naturvitenskapelige universitet (NTNU) i Trondheim våren 2020. Målet ... -
Prototyping and Testing During an Assistive Sports Equipment Development Process
(Master thesis, 2018)An important part of the development process is to validate ideas and concepts continuously. Within physical design, this is primarily done by creating prototypes and testing them. This process is especially important ... -
Prototyping and Testing of a Consumer Grade Flood Protection System
(Master thesis, 2018)Injection moulding is a common production method for mass manufacturing of plastic products. However, creating production-intent prototypes for these products is a challenging task, as injection moulds are expensive to ... -
Prototyping and testing of novel flood protection systems
(Master thesis, 2016)This thesis describes the early development stages of novel consumer flood protection systems. The development process has emphasized prototyping and experimentation as a strategy to front-load the development, which is ... -
Prototyping Cyber-Physical Systems using Wayfaring - An Experiment and Insights for Early-Stage Development
(Doctoral theses at NTNU;2020:389, Doctoral thesis, 2020)The two main aims of the thesis are firstly to qualitatively and quantitatively research the effect of using a prototype-driven wayfaring approach for the early-stage development of cyber-physical systems to give normative ... -
Prototyping in the Industrial Internet
(Master thesis, 2017)Founded on the pre-master project Industrial Internet: Sensor Applications and Measurements in a Workshop Setting (A1) as a starting point for thinking about early stage product development in the industrial internet, ...