Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 2545-2564 av 3979
-
Multi Criteria Decision Analysis (MCDA) in the Norwegian Maritime Sector: Adding Environmental Criteria in Maritime Decision Support Systems
(Master thesis, 2014)There are several current challenges to the competitiveness of the Norwegian maritime sector. The short sea shipping industry is facing tougher requirements on the environmental performance of vessel technologies, mainly ... -
A Multi-Analytical Approach for the Characterization of Seventeenth Century Decorative Wall Paintings in Two Norwegian Stave Churches: A Case Study at Eidsborg and Heddal, Norway
(Peer reviewed; Journal article, 2021)The presented research examines 17th century distemper paint from the polychrome wooden interiors of two Norwegian stave churches: Eidsborg and Heddal. For the first time, the inorganic and organic components of specimens ... -
Multi-decadal variability in the snow-cover reconstruction at Parma Observatory (northern Italy, 1681-2018 CE)
(Peer reviewed; Journal article, 2020)Emerging negative trends in snow depth and cover days highlight the challenges posed by changing snow patterns around the world. They suggest that snow-dependent regions in southern Europe could be affected by these changes ... -
Multi-indicator supply chain management framework for food convergent innovation in the dairy business
(Peer reviewed; Journal article, 2021)A comprehensive integrated framework of indicators currently used in lean, agile, sustainable and resilient supply chain paradigms is developed under the umbrella of convergent innovation (CI) and applied to the management ... -
Multi-Level Production Leveling in the Food Processing Industry
(Master thesis, 2022)Produsenter med et flere-nivå produksjonsmiljø i næringsmiddelindustrien, sliter med å finne en produksjonsplan som jevner ut produksjonen og sikrer passende utnyttelse av arbeidsstyrke og maskiner på daglig basis. Med ... -
Multi-phase reliability growth test planning for repairable products sold with a two-dimensional warranty
(Journal article; Peer reviewed, 2019)For products sold with a two-dimensional warranty policy, the warranty servicing cost can be reduced through reliability growth during development. This paper investigates a multi-phase reliability growth test program for ... -
Multi-Robot Control with MotoROS2
(Master thesis, 2023)Denne oppgaven tar for seg utfordringene knyttet til intelligent robotprogrammering, spesielt i sammenheng med Manulab-robotsystemet ved NTNU. Den eksisterende kontrollmetoden for systemet var utilstrekkelig for effektiv ... -
Multi-scale study of hydrogen-assisted cracking in nickel-based superalloys
(Doctoral theses at NTNU;2020:91, Doctoral thesis, 2020)Precipitation-hardened nickel-based superalloys are widely used for subsea oil and gas industries. However, they are susceptible to hydrogen embrittlement (HE) when they are used in the hydrogenated environment. There are ... -
Multi-Stage Replenishment System: a Case Study
(Master thesis, 2016)In a multi-stage production-inventory system it is generally accepted that the operation attributes vary between the stages. This can result in the applied inventory control policy being less suitable for some stages in ... -
Multiaxial Fatigue Crack Orientation and Early Growth Investigation Considering the Nonproportional Loading
(Journal article; Peer reviewed, 2018)The paper presents a comprehensive investigation of fatigue cracking behaviors under various nonproportional multiaxial cycle loading paths based on the critical plane approach. The maximum normal and shear stress/strain ... -
Multiaxial fatigue life assessment in notched components based on the effective strain energy density
(Peer reviewed; Journal article, 2020)This paper presents a methodology to predict the fatigue lifetime in notched geometries subjected to multiaxial loading based on the effective strain energy density concept. The modus operandi consists of defining a fatigue ... -
Multiaxial Fatigue of Stainless Steel Fabricated via Wire Arc Additive Manufacturing
(Master thesis, 2022)Abstrakt Det foreslåtte oppgavearbeidet tar sikte på å studere den multiaksiale tretthetsoppførselen til ER100S-1 oppnådd ved bruk av Wire Arc Additive Manufacturing (WAAM) prosess, mer presist kaldmetalloverføring. ... -
Multiaxial fatigue strength of titanium alloys
(Journal article; Peer reviewed, 2017)The present paper investigates the multiaxial fatigue strength of sharp V-notched components made of titanium grade 5 alloy (Ti-6Al-4V). Axisymmetric notched specimens have been tested under combined tension and torsion ... -
Multibody simulation of a Formula Student Race Car
(Master thesis, 2023)Denne masteroppgaven fokuserer på utviklingen av en omfattende multibody-simulering for en formel student racerbil. Simuleringsmodellen ble laget ved bruk av Altair-miljøet, med stor vekt på å oppnå høy nøyaktighet i ... -
Multibody Simulation of a Formula Student Race Car
(Master thesis, 2023)Denne masteroppgaven fokuserer på utviklingen av en omfattende multibody-simulering for en formel student racerbil. Simuleringsmodellen ble laget ved bruk av Altair-miljøet, med stor vekt på å oppnå høy nøyaktighet i ... -
Multimodal Product Design: a Development of Engineering Design Models in Systematic Approach
(Doctoral theses at NTNU;2016:92, Doctoral thesis, 2016)Having multiple modes on one product has been prevalent among modern technological products, such as washing machines that have washing and spinning modes and car transmissions with sport and economic modes. Multiple ... -
Multiphysical Simulation of Ocean Engineering Systems — Modelica Ocean Engineering Library — Cosimulation for Drilling Riser Analysis
(Doctoral theses at NTNU;2021:162, Doctoral thesis, 2021)The advancements in computing has made it possible to carry out integrated simulation of complex multiphysical systems, to better evaluate system performance and safety. The discipline of multiphysical simulation, though ... -
Multiple missed calls: addressing the practice of missed calls
(Master thesis, 2010) -
Multiscale Modeling of the Polyamide 11 Hydrolytic Degradation for Offshore Industry Applications: Comparison between model predictions and experimental aging
(Doctoral thesis at NTNU;2015:330, Doctoral thesis, 2015)Hydrolytic degradation at elevated temperatures is a key reason for failure in offshore flexible risers. Polyamide 11 (PA11) is one of the most common materials used for the internal pressure sheaths in flexible risers due ... -
Multiscale Modelling of Environmental Degradation—First Steps
(Chapter, 2018)Fibre-reinforced plastics are praised for their good corrosion resistance. However, when this resistance needs to be documented for safety-critical applications extensive and time-consuming test programmes are needed. A ...