Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 13-32 av 3987
-
3D robot vision using multiple cameras
(Master thesis, 2016)3D computer vision has in recent years become more popular in regards to robotic vision systems. This thesis looks into the possibility of using a multiple 3D camera setup for robotic vision. The approach is to reconstruct ... -
3D-Focused ion beam tomography and quantitative porosity evaluation of ZrO2-SiO2 composite coating; amorphous SiO2 as a porosity tailoring agent
(Peer reviewed; Journal article, 2020)The current study is focused on refining effect of amorphous SiO2 on porosity and interlayer formation of sintered ZrO2-SiO2 composite coatings produced on anodic oxidized 316L substrate. The SiO2 improved particle interaction ... -
3D-Printing Technology in Construction: Results from a Survey
(Chapter, 2019)Purpose – The purpose of this paper is to study the introduction of 3D-printing of concrete in the construction sector. Design/Methodology/Approach – A survey was conducted to collect professional view on ongoing innovations ... -
40CrMoV13.9 notched specimens under multiaxial fatigue: An overview of recent results
(Journal article; Peer reviewed, 2017)The multiaxial fatigue strength of circumferentially V-notched and semicircular notched specimens made of 40CrMoV13.9 has been investigated in this paper. The multiaxial load were applied using combined tension and torsion ... -
4D Printing Modeling - Layers structures: Preliminary optimization of shape memory polymers geometric parameters to enhance the thermal loads’ activation range
(Master thesis, 2022)I løpet av de siste tiårene har 3D-utskrift funnet anvendelser innen alle områder innen ingeniørkunst, alt fra elektronikk til biomedisinsk industri, på grunn av dens effektivitet i bruken av materialet i termer av ... -
6D Synthetic Data Generation Pipeline with Digital Representation of Structured Light Sensor
(Master thesis, 2021)Behovet for 3D datasett for bruk i datasynsoppgaver øker med den økte bruken av nevrale nettverk på datasynsoppgaver som 6D-estimering og og segmentering. Disse nevrale nettverkene trenger store mengder data for å trene ... -
A Blended Learning Approach to Teaching Project Management: A Model for Active Participation and Involvement: Insights from Norway
(Journal article; Peer reviewed, 2015)The paper demonstrates and evaluates the effectiveness of a blended learning approach to create a meaningful learning environment. We use the term blended learning approach in this paper to refer to the use of multiple or ... -
A case of dynamic risk management in the subarctic region
(Chapter, 2017) -
A classification method for scaling river biotopes for assessing hydropower regulation impacts
(Doktoravhandlinger ved NTNU, 1503-8181; 2005:140, Doctoral thesis, 2005)This thesis describes the development of a habitat assessment methodology based on theories of hydroecology for use in river basin management. The methodology includes a robust habitat classification system and provides ... -
A Combined Gurson-RKR Model for the Ductile to Brittle Transition in Steel
(Master thesis, 2017)The goal of this work was to establish a simulation scheme that incorporates both ductile and brittle fracture modes with respect to temperature in order to describe the aforementioned toughness dependency on temperature. ... -
A Combined Photoplethysmography and Force Sensor Prototype for Improved Pulse Waveform Analysis
(Chapter, 2019)Pulse detection has in recent years received extensive attention in physiological health monitoring, and continuous blood pressure estimation models based on pulse waveform analysis have shown great promises. Two widely ... -
A Comparative Analysis of Machine Learning models in Prognostics and Prediction of Remaining Useful Life of Aircraft Turbofan Engines
(Master thesis, 2024)I jakten på å forbedre sikkerheten og påliteligheten til komplekse industrielle systemer har teknologien for Prognostisk Helsestyring (PHM), spesielt dens komponenter for feildiagnose og prognose, funnet økende relevans i ... -
A comparative study between traditional topology optimization and lattice optimization for additive manufacturing
(Journal article; Peer reviewed, 2019)Topology optimization (TO) aids designers to come up with new ideas that would be impossible to be designed without this technology. However, the optimized results are usually characterized by high geometric complexity, ... -
A comparative study of beam element formulations for nonlinear analysis: corotatinal vs. geometrically exact formulations
(Chapter, 2017)In this work the geometrically exact three-dimensional beam theory has been used as basis for development of a family of isoparametric higher order large deformation curved beam elements. Geometrically exact three-dimensional ... -
A comparative study of cost-reducing measures in Value Driven Maintenance and Equinor´s maintenance practices on aging offshore installations
(Master thesis, 2020)Abstract will be available on 2023-06-30 -
A Comparative Tribocorrosion Study of Additive Manufactured and Wrought 316L Stainless Steel in Simulated Body Fluids
(Journal article; Peer reviewed, 2018)In this study, the corrosion and tribocorrosion behavior of additive manufactured (AM) 316L is investigated and compared to wrought 316L. The experiments were performed in both a 0.9 wt% NaCl solution and a simulated body ... -
A comparison between numerical and approximate methods for rapid calculation of NSIFs
(Journal article; Peer reviewed, 2019)To more rapidly predicting the integrity of components weakened by sharp notches, notch stress intensity factors (NSIFs) are usually evaluated. Many methods have been proposed evaluating NSIFs, ranging from the stress ... -
A Comparison of Hazards and Efficiencies of Conventional and Adaptive Control Algorithms Using Systems-Theoretic Process Analysis
(Journal article; Peer reviewed, 2019)Control systems are an important and increasingly complex part of most industrial and non-industrial systems. As such, identifying and handling associated risks is increasingly important. Systems- Theoretic Process Analysis ... -
A Comparison of Theoretical and Measured Pressure Losses Within a Drinking Water Treatment Plant
(Master thesis, 2016)Pressure loss and its effects on the resulting hydraulics within a drinking water treatment plant are extremely important aspects of design and operation. Pressure losses are important to monitor as they are the driving ...