• Development of Sealing Solution for Packer System in Directional Core Drill 

      Farrell, Liam; Tvenning, Terje; Svartvatn, Preben (Bachelor thesis, 2020)
      Abstract will be available on 2023-05-20
    • Development of Seat for New Machine for Rehabilitation of Whiplash Patients 

      Kirkeeide, Marius (Master thesis, 2016)
      A large number of people are exposed to the whiplash mechanism each year. Some of these develop chronic problems. Firda fysikalsk-medisinsk senter (FFMS) is a rehabilitation center situated in Sandane, Western Norway. FFMS ...
    • Development of Ski Touring Boot 

      Underdal, Sondre Gårdsrud (Master thesis, 2017)
      This project is based on an idea formed by Anders Lagerström and Fredrik Lund of a Ski Touring Boot (STB) with a higher cuff than what found on a regular STB on the market of today. The higher cuff gives the skier better ...
    • DEVELOPMENT OF SPINEBOARD 

      Ervik, Mariann (Master thesis, 2012)
      This master s thesis is the continuation of a preliminary study conducted in the fall of 2011. The project is defined by NTNU in cooperation with Laerdal Medical. Laerdal Medical AS is a major manufacturer of medical ...
    • Development of the Market's Lightest Backcountry Ski Binding - A Study on Structural Optimization 

      Flem, David Tollnes (Master thesis, 2018)
      The aim of this thesis Development of the Market s Lightest Backcountry Ski Binding is to see how topology optimization can be used to create a light weight and stiff ski binding. Sports equipment is getting lighter and ...
    • DEVELOPMENT OF THRUST VECTORING SYSTEM FOR STORMPETREL 

      Lundgaard, Johannes Hatle (Master thesis, 2016)
      Abstract To overcome the limitations that existing VTOL RPAS (Vertical Take-Off and Landing Remotely Piloted Aircraft System) imposes on range and high wind capabilities, a new type of RPAS platform is investigated. A ...
    • Development of Tools Enabling the Deployment and Management of a Multi-Energy Renewable Energy Community with Hybrid Storage 

      Ustolin, Federico; Hendrick, Patrick; Paltrinieri, Nicola (Journal article; Peer reviewed, 2021)
    • Development of Variable Pitch Rotor System for VTOL Drone 

      Busengdal, Kristoffer K (Master thesis, 2016)
      As part of a bigger effort to develop a VTOL unmanned aerial vehicle, a working prototype of the thruster unit of said UAV has been developed. The thruster unit consisting of the motor and its sub systems and the rotor ...
    • Development of Waterproof gimbal 

      Hørthe, Petter (Master thesis, 2017)
      A gimbal is a pivoting platform that allows an object, in this case a camera, to rotate around one or multiple axes. FlowMotion is a start-up company at NTNU and they are making gimbals for smartphones and action cameras. ...
    • Development of World Class Manufacturing Framework by Using Six-Sigma, Total Productive Maintenance and Lean 

      Okhowat, Mohammad amin; Arifin, Khairul; Nehzati, Taravatsadat; Hosseini, Seyed ali (Journal article; Peer reviewed, 2012-12-24)
      The purpose of this study is to develop a new framework to provide guidance and support for those companies who aim to reach world-class standards both in maintenance and manufacturing processes through continual ...
    • Development, Building and Competing with a New Car in Shell Eco-marathon 

      Carlsen, Bård Dagestad; Oma, Odin Jul (Master thesis, 2017)
      This Master s thesis is the continuation of the project thesis by Carlsen and Oma (2016). It describes the work that has been done in order to participate with a new car in Shell Eco-marathon in May of 2017. A new ...
    • Development, Design and Production of a Wingsail for an Autonomous Surface Vessel 

      Dyrseth, Maria Brudeseth (Master thesis, 2020)
      I løpet av de siste årene har det vært en økende interesse i å undersøke det marine økosystemets helse. Klimaendringer der økte havnivåer, en økende marin industri og shipping, plastikkavfall i havet og forurensing fra ...
    • Diatoms in new design 

      Morland, Markus (Master thesis, 2014)
      The first part of this thesis is a literature study into the applications of diatom frustules. The second part is FE-analysis of micromechanical testing of diatom frustules undertaken at NTNU. The models are based on ...
    • Diatoms Investigated by Atomic Force Microscopy 

      Svendsgaard, Torstein (Master thesis, 2015)
      Diatoms are microscopic algae which have a complex outer cell wall(frustule) made up by silicon dioxide and organic proteins, collectively called biosilica. The mechanical properties of the diatom frustule have been a ...
    • Different Aspects of Flushing of Hydropower Intakes 

      Nielsen, Lars Eid; Rettedal, Bjørnar (Master thesis, 2012)
      Different design criteria for successful flushing of hydropower headworks have been evaluated. Main focus has been on handling of floating debris for small hydropower plant in Norway, as well as sediment handling for run ...
    • Differentiated production planning and control in food supply chains 

      Romsdal, Anita (Doktoravhandlinger ved NTNU, 1503-8181; 2014:16, Doctoral thesis, 2014)
      The PhD thesis reports on an empirical and exploratory investigation of the strategic determination of the principles used to guide production planning and control (PPC) in the food sector. Food producers have traditionally ...
    • Differentiation and Bone Deposition of Bone Marrow Derived Stem Cells on Additive Manufactured Porous Ti-6Al-4V Scaffolds 

      Jøraholmen, Timothy (Master thesis, 2017)
      The number of arthroplasty surgeries, or joint replacing surgeries, being performed each year is increasing worldwide. Younger patients are also being increasingly introduced to this kind of surgery, which means that the ...
    • Digital Assembly Assistance System in Industry 4.0 Era: A Case Study with Projected Augmented Reality 

      Simonetto, Marco; Peron, Mirco; Fragapane, Giuseppe; Sgarbossa, Fabio (Chapter, 2021)
      Automation has increased more and more in manufacturing companies over the last decades. However, manual labor is still used in a variety of complex tasks and is currently irreplaceable, especially in assembly operations. ...
    • Digital Engineering Management in an Academic CubeSat Project 

      Honoré-Livermore, Evelyn; Birkeland, Roger; Bakken, Sivert; Garrett, Joseph; Haskins, Cecilia (Peer reviewed; Journal article, 2021)
      Digital engineering is increasingly introduced for managing and supporting the development of systems for space. However, few academic teams have the competency needed to manage projects using digital engineering and systems ...
    • Digital Facility Layout Planning 

      Peron, Mirco; Fragapane, Giuseppe; Sgarbossa, Fabio; Kay, Michael (Peer reviewed; Journal article, 2020)
      In recent years, companies have increased their focus on sustainability to achieve environmental-friendly improvements, to manage pressures from society and regulations, and to attract customers that appreciate sustainability ...