Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 567-586 av 3992
-
Classification of risk to support decision-making in hazardous processes
(Journal article, 2015)Application of risk assessments developed for the design phase to support decision-making in operational settings has exposed weaknesses in how risk is analysed and expressed in an operational context. The purpose of this ... -
Classifying and Defining Operational and Organizational Aspects of Barriers for the Offshore Oil and Gas Industry
(Master thesis, 2013)This masters thesis is written on the topic of barrier management, and specifically the human and organizational aspects in this field. The main objective of the thesis is to clarify the use of terms related to human and ... -
Classifying filling rate of waste in containers using Machine Learning
(Master thesis, 2019)I denne masteroppgaven gjøres eksperimentelt arbeid på et pågående prosjekt mellom to bedrifter, Veidekke og Acando. På Veidekkes byggeplasser er det mange avfallscontainere. Veidekke ønsker at Acando skal automatisere ... -
Cleanliness in air brakecouplings
(Master thesis, 2011)This master thesis is written for Kongsberg Automotive (KA) located at Raufoss, about cleanliness in their products. KA produces air brake couplings mainly in brass and composite for truck, bus, trailer and off-road ... -
Client-Side Computing in General-Purpose Digital Shadow Applications
(Master thesis, 2020)Den raske utviklingen av IoT-teknologi og det faktum at stadig mer data blir tilgjengelig digitalt har ført til et økt antall bruksområder for digitale tvillinger. Historisk har definisjonen av en digital tvilling forlanget ... -
Climate Change and Increased Irrigation Demands: What Is Left for Hydropower Generation? Results from Two Semi-Arid Basins
(Journal article; Peer reviewed, 2016-03-14)In this study, we have modelled the effect of climate change and increased irrigation withdrawals on the available water for hydropower production in two semi-arid river basins, i.e., Kizilirmak (Turkey) and Devoll (Albania), ... -
Climate change impact on wastewater networks
(Master thesis, 2016)The main findings of this thesis are summarized below : The extrapolations from precipitation analysis are too large for long term planning to be use in design drainage system. The 10 years periods of time are too short ... -
Climate Change Impacts on Winter Hydrological Regimes: Implications for Hydropower Operation
(Doktoravhandlinger ved NTNU, 1503-8181; 2014:113, Doctoral thesis, 2014)The winter hydrological regime of freshwater bodies is strongly affected by climate forcings. With climate change in the spotlight, it becomes imperative to investigate how these systems react to changes in the forcings ... -
Climate change, large fires, and cultural landscapes in the mediterranean basin: An analysis in southern Spain
(Peer reviewed; Journal article, 2023)Understanding the factors that influence fire regimes in Mediterranean climates is essential to reduce their risk. This research uses Climate Hazards Group InfraRed Precipitation with Station (CHIRPS) and Moderate-Resolution ... -
Climate-induced conservation Risks of historic reinforced concrete buildings: preliminary results from literature review
(Peer reviewed; Journal article, 2023)Environmental conditions can favour different kinds of deterioration in historic reinforced concrete structures. This preliminary results from literature review are focused on the climate-induced risks affecting reinforced ... -
Clinoenstatite/tantalum coating for enhancement of biocompatibility and corrosion protection of Mg alloy
(Peer reviewed; Journal article, 2020)Biodegradable Mg alloys have appeared as the most appealing metals for biomedical applications, particularly as temporary bone implants. However, issues regarding high corrosion rate and biocompatibility restrict their ... -
Closed Loop Tolerance Engineering
(Doctoral thesis at NTNU;2015:1, Doctoral thesis, 2015)Dette avsnittet sammenfatter doktorgradsavhandlingen «Closed Loop Tolerance Engineering - An Approach for Designing Robust» i sin helhet. Arbeidet er utført av Lars Krogstie og avhandlingen har seks hovedkapittel (Ch.1-6) ... -
Closed Mould Net Shape Processing of Prepregs with Resin Injection
(Master thesis, 2013)High performance composite parts require strict tolerances in all directions before the parts are ready to be used. Numerous of machining and assembly operations are often required to obtain the desired geometry and ... -
Cloud Material Handling System - Leveraging dynamic dispatching and reinforcement learning in a cloud-enabled shop floor material handling system
(Master thesis, 2021)Effektiv håndtering av materialer og produkter på produksjonsgulv er viktig for å redusere produksjonskostnadene og forbedre produktiviteten. Selv om det vitenskapelige samfunnet har omfavnet automatisert materialhåndteringsutstyr ... -
Cloud Material Handling System - Leveraging dynamic dispatching andreinforcement learning in a cloud-enabled shopfloor material handling system
(Master thesis, 2021)Effektiv håndtering av materialer og produkter på produksjonsgulv er viktig for å redusere produksjonskostnadene og forbedre produktiviteten. Selv om det vitenskapelige samfunnet har omfavnet automatisert materialhåndteringsutstyr ... -
Cloud Material Handling Systems: Conceptual Model and Cloud-Based Scheduling of Handling Activities
(Chapter, 2020)Nowadays, the implementation of cloud manufacturing technologies epitomizes the avant-garde in production systems. This affects several aspects of the management of these production systems, in particular scheduling ... -
CNN-based Feature Extraction for Robotic Laser Scanning of Weld Grooves in Tubular T-joints
(Chapter, 2022)This paper presents an algorithm for feature point extraction from scanning data of large tubular T-joints (a subtype of a TKY joint). Extracting such feature points is a vital step for robot path generation in robotic ... -
CO2 Adsorption and Activation on the (110) Chalcopyrite Surfaces: A Dispersion-Corrected DFT + U Study
(Journal article; Peer reviewed, 2019)We have used the density functional theory within the plane-wave framework to understand the reconstruction of most stable (110) chalcopyrite surfaces. Reconstructions of the polar surfaces are proposed, and three different ... -
CO2-fri distribusjon i bylogistikk
(Master thesis, 2010)Varedistribusjon er både et problem og en nødvendig funksjon i byer. En kontinuerlig urbaniseringog fortetting, sammen med sentralisering av produksjon og lagerhold, har ført til økte godsvolumer og flere transportoppdrag ... -
CO2-varmepumpe for energigjenvinning fra gråvann
(Bachelor thesis, 2019)Rapporten handler om testing av prototype av en varmepumpe som henter energi fra gråvann og bruker CO2 som arbeidsmedium. Den omhandler generell bruk av CO2 og gråvann samt en omfattende del om hvordan testene har foregått. ...