Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 3363-3382 av 4015
-
Small scale testing approach to reveal specific features of slip behavior in BCC metals
(Peer reviewed; Journal article, 2019)Plastic behavior of Fe–3%Si was investigated with a novel methodology at microscopic scale and higher stress resolution beyond the existing macroscopic test methods. Activation of single slip system in micropillars under ... -
SMALL-SCALE FRACTURE AND ARREST TESTING OF IRON AT LOW TEMPERATURES
(Doctoral theses at NTNU;2018:244, Doctoral thesis, 2018)The industrial activity in the Arctic is expanding. An ever-increasing demand for energy is forcing the production of oil further north, where accidents may have severe ecological ramifications. Rough climate conditions ... -
Small-Scale Mechanical Testing of Single Crystal Fe at Low Temperatures
(Doctoral theses at NTNU;2018:60, Doctoral thesis, 2018)Nowadays, the increasing exploration and production in the Arctic region poses an urgent challenge to the mechanical properties of materials. The lack of knowledge of the “cold-brittleness” raises the need to better ... -
Smart Industrial Asset Maintenance: Digitalization and Redefining Work Practices
(Master thesis, 2020)I produksjonsindustriene er svikt i noe utstyr minst ønsket, da det medfører kostnader forbundet med produksjonsnedbryting og vedlikehold. Dessuten medfører utstyrssvikt sikkerhetsproblemer hvis det fører til en katastrofal ... -
Smart Maintenance
(Master thesis, 2021)The rapid growth in industry 4.0 globally made smart maintenance an exciting topic in recent years. Moreover, there is a need in the industry for a new concept for smart maintenance that leads to optimal outcomes. This ... -
Smart Maintenance on a case study at Elkem Iceland ferrosilicon plant
(Master thesis, 2020)Abstract will be available on 2023-06-10 -
Smart Maintenance in Asset Management – Application with Deep Learning
(Chapter, 2020)With the onset the digitalization and Industry 4.0, the maintenance function and asset management in a company is forming towards Smart Maintenance. An essential application in smart maintenance is to improve the maintenance ... -
Smart Material Handling at Trondheim Public Library
(Master thesis, 2023)Trondheim folkebibliotek strever for øyeblikket med den økende etterspørselen i biblioteksektoren. Budsjettkutt og mangel på personell betyr at biblioteket vil stå overfor flere utfordringer i årene som kommer. I samarbeid ... -
Smart Production Planning and Control: Concept, Use-Cases and Sustainability Implications
(Journal article; Peer reviewed, 2020)Many companies are struggling to manage their production systems due to increasing market uncertainty. While emerging ‘smart’ technologies such as the internet of things, machine learning, and cloud computing have been ... -
Smart production planning and control: do all planning environments need to be smart?
(Peer reviewed; Journal article, 2021)As part of Industry 4.0, the concept of smart production planning and control (PPC) is emerging. In this paper we develop a theoretical framework that links the characteristics of a company’s planning environment with the ... -
Smart production planning and control; concept for improving planning quality with production feedback data
(Chapter, 2023)Planning quality depends on the use of correct, accurate, realistic, and reliable planning data. Industry 4.0 has facilitated large-scale data collection from a variety of sources, including production feedback data. The ... -
Smart textile waste collection system – Dynamic route optimization with IoT
(Peer reviewed; Journal article, 2023)Increasing textile production is associated with an environmental burden which can be decreased with an improved recycling system by digitalization. The collection of textiles is done with so-called curbside bins. Sensor ... -
Smart vedlikehold i Bane NOR
(Master thesis, 2019)Jernbanesektoren har alltid hatt sikkerhet som den høyeste prioritet. I 2014 da den nye nasjonal transportplanen for 2014-2023 ble presentert, viste den store investeringer for en mer aktiv jernbane i Norge. For å kunne ... -
Smart vedlikehold som en del av fremtidens innovative vedlikeholdssatsning
(Master thesis, 2019)Vedlikehold og vedlikeholdsstrategier har utviklet seg i industrien gjennom mange år. Vedlikehold har utviklet seg fra å være en byrde på bakgrunn av reaktive metoder til et konsept hvor organisasjoner kan generere ... -
Smart Workstation with a Kinect-Projector Assistance System for Manual Assembly
(Master thesis, 2019)Although automation has increased more and more in manufacturing companies over the last decades, manual labor is still used in a variety of complex tasks and is currently irreplaceable, especially in assembly operations. ... -
Snill mot miljøet, de ansatte og lommeboka?
(Bachelor thesis, 2019)Målet med denne rapporten har vært å vurdere om en hybrid arbeidsbåt er en lønnsom innvestering på sikt. I tillegg har gruppen sett på om hybride arbeidsbåter kan bidra positivt til arbeidsmiljøet og på utslipp av ... -
Snujigg til katodekasse brukt til produksjon av aluminium
(Bachelor thesis, 2019)Formålet med denne oppgaven var å utvikle en snu-jigg for å gi Storvik AS mulighet til å utføre vedlikehold på katodekasser som fungerer som elektrolyseceller i fremstillingen av aluminium. Slik de står i dag utføres det ... -
Social aspects of process monitoring in manufacturing systems
(Journal article; Peer reviewed, 2012)Many systems for process monitoring using in-process sensor measuring rely on human interpretation and reaction in order to control the process and achieve the desired effect from the monitoring. This paper reports from ... -
The social structure of 70 years of literature on Human Reliability
(Journal article; Peer reviewed, 2021)