Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 547-566 av 3992
-
Challenges on Implementing Agile Project Management Methods: An Literature Review and Interview Study with Practitioners
(Master thesis, 2010)Indicated by Geoffrey Moore's Technology Adoption Curve, agile is supposed to face different challenges in different phases facing different user groups. Despite the popularity of agile implementation, the trends of agile ... -
Change of strain field due to damage development in adhesive joints
(Master thesis, 2013)In this thesis six metal I-beams with a crack repaired by a composite patch been tested in four point bending. The patches used to repair the beams had three different patch thicknesses. The different thicknesses were ... -
Changes in material flows, treatment efficiencies and shifting of environmental loads in the wastewater treatment sector: Part II: Case study of Norway
(Journal article; Peer reviewed, 2010) -
Changes in the Stakeholder Management Process
(Master thesis, 2011)The topic of this thesis is “Changes in the Stakeholder Management Process” and refers to the changes being made to the guideline for stakeholder management (GL0013) in Statoil. The new GL0013 has been gradually implemented ... -
Chapter Two - Dynamic risk analysis—Fundamentals
(Journal article, 2020)This work focuses on the emerging topic of Dynamic Risk Analysis (DRA), as opposed to traditional static risk analysis. DRA fundamentals are introduced by discussing the overall understanding of the risk concepts. Its ... -
Characterisations and Interventions of the Water-Energy Nexus in Urban Water Systems
(Master thesis, 2013)This study explores the water-energy nexus of urban water services and the water-related energy demands that stem from them. The initial objective provides insight into the development of nexus analyses through a review ... -
Characterization of 3D-printed PLA parts with different raster orientations and printing speeds
(Peer reviewed; Journal article, 2022)Fabrication based on additive manufacturing (AM) process from a three-dimensional (3D) model has received significant attention in the past few years. Although 3D printing was introduced for production of prototypes, it ... -
Characterization of AA6082-T6 Aluminium alloy and S355 steel welding achieved with the hybrid metal extrusion & bonding (HYB) process.
(Master thesis, 2018)The HYB is an innovative cold welding process and this work try to show the good results in a dissimilar joining obtained with the process. The tests carried out are: HV hardness test for showing the heat affected zone; ... -
Characterization of Biopolymer Based Nanocomposites
(Doktoravhandlinger ved NTNU, 1503-8181; 2007:12, Doctoral thesis, 2007)The field of nanocomposites is gaining considerable attention due to its potential for providing new materials with extraordinary physical properties compared to traditional composite materials. In this thesis cellulose ... -
Characterization of Non-Metallic Inclusions in Ferritic Weld Metals for Arctic Applications
(Master thesis, 2015)In Arctic applications, structural steel weldments will be subjected to low temperatures, in the worst cases approaching -60 °C. This may be a major challenge, due to the ductile to brittle transition taking place at certain ... -
Characterization of photocatalytic materials used for water treatment
(Master thesis, 2015)As the pressure on water bodies throughout the world is increasing, good water quality obtained through water treatment is essential to secure health and welfare of the population. Many chemical compounds used in industry ... -
Characterizing the Mechanical Behavior of Historic Polychrome Wood
(Doctoral theses at NTNU;2021:319, Doctoral thesis, 2021)Stave church is a term derived from the technique of constructing a church using corner posts or staves as loading-bearing pillars. Currently there are only 28 stave churches in Norway, but in the mediaeval period over ... -
Charge weld evolution in hollow aluminum extrusion: Experiments and modeling
(Peer reviewed; Journal article, 2024)Charge welds occur in billet-to-billet extrusion processes due to the transition between successive billets. The material in this transition zone is typically characterized by substandard mechanical properties. In industrial ... -
Chasing Margins - Analysis and Design of Outriggers for Para Alpine Sit-skiing
(Master thesis, 2021) -
Chemical heterogeneity enhances hydrogen resistance in high-strength steels
(Journal article; Peer reviewed, 2021)The antagonism between strength and resistance to hydrogen embrittlement in metallic materials is an intrinsic obstacle to the design of lightweight yet reliable structural components operated in hydrogen-containing ... -
Choice of Demand Mode for Subsea Safety Systems
(Master thesis, 2013)In the real industry project where new technology and systems have blossomed and been codified, many problems and challenges regarding the application of international safety systems standard IEC 61508 in terms of low ... -
Circular Business Models in the Manufacturing Industry - a Mixed Method Approach
(Master thesis, 2021)Konseptet om en sirkulær økonomi har i de senere år opplevd økt oppmerksomhet og interesse som et resultat av verdens økende bærekraftsutfordringer. En sirkulær økonomi er allment anerkjent som en bærekraftig erstatning ... -
Circular economy in biocomposite development: State-of-the-art, challenges and emerging trends
(Peer reviewed; Journal article, 2021)Biocomposites being environmentally-friendly alternative to synthetic composites are gaining increasing demand for various applications. Hence, biocomposite development should be integrated within a circular economy (CE) ... -
Clarifying Implementation of Safe Design Principles in IEC 61508: Challenges of Novel Subsea Technology Development
(Chapter, 2019)When new technologies are introduced to safety systems, they may raise some new discussions and clarifications about established practices. IEC 61508 represents a general framework which may apply to all electrical/ ... -
Clarifying the concept of operational risk assessment in the oil and gas industry
(Journal article, 2018)There is an increasing interest in risk and safety research to reflect risk fluctuations in operational phase to avoid major accidents from happening. A structured review that covers operational risk assessment, dynamic ...