Blar i Institutt for konstruksjonsteknikk på tittel
Viser treff 1629-1648 av 2483
-
Moment resisting splice of timber beams using long threaded rods and grout-filled couplers – Experimental results and predictive models
(Journal article, 2017)In order to achieve larger spans of timber arch bridges, glulam massive timber sections must be spliced on-site by moment resisting and rotationally stiff joints. In this paper, a novel timber splice connection utilizing ... -
Moment resisting timber connection using threaded rods and steel coupling parts
(Master thesis, 2021) -
Moment-resisting beam-to-column timber connections with inclined threaded rods: Structural concept and analysis by use of the component method
(Peer reviewed; Journal article, 2022)The use of moment-resisting frames with semi-rigid connections as a lateral load-carrying system in timber buildings can reduce the need for bracing with diagonal members or walls and allow for more open and flexible ... -
Moment-resisting timber frames combined with cross laminated timber walls for multistorey timber buildings
(Doctoral theses at NTNU;2024:141, Doctoral thesis, 2024)The increase in the world population results in higher urbanization, which poses a significant challenge due to the substantial contribution of construction industry to greenhouse gas emissions. The increased urbanization ... -
Moment-resisting timber frames with semi-rigid connections
(Doctoral theses at NTNU;2021:88, Doctoral thesis, 2021) -
Momentbelastede endeplateforbindelser - med bruk av høyfast stål
(Master thesis, 2017)I rapporten beregnes kapasitet og initialstivhet til knutepunkter satt sammen av kvadratiske hulprofiler sveist til en endeplate i høyfast stål (WELDOX 700). Dette gjøres da Eurokode 3 del 1-8: «Knutepunkter og forbindelser» ... -
Momentbærende forbindelser i limtrebjelker
(Master thesis, 2012)Denne oppgaven har som hensikt å beregne og teste momentbærende knutepunkt i tre. Tidligere undersøkelser rundt byggingen av høyhus i tre har alle konkludert med at dette ikke vil være mulig, uten å gjøre tiltak for å dempe ... -
Monitoring variability in parameter estimates for lumped parameter models of the systemic circulation using longitudinal hemodynamic measurements
(Journal article; Peer reviewed, 2023)Background Physics-based cardiovascular models are only recently being considered for disease diagnosis or prognosis in clinical settings. These models depend on parameters representing the physical and physiological ... -
Monitoring variability in parameter estimates for lumped parameter models of the systemic circulation using longitudinal hemodynamic measurements
(Peer reviewed; Journal article, 2023)Background Physics-based cardiovascular models are only recently being considered for disease diagnosis or prognosis in clinical settings. These models depend on parameters representing the physical and physiological ... -
Monolithic and laminated glass under extreme loading conditions: Experiments, modelling and simulations
(Doctoral theses at NTNU;2019:304, Doctoral thesis, 2019)Design of glass components has become more challenging over the past few decades, owing to the increased use of glass as a structural material. When a structure is required to withstand extreme loading, such as blast or ... -
Monopile responses to monotonic and cyclic loading in undrained sand using 3D FE with SANISAND-MSu
(Peer reviewed; Journal article, 2021)Monopile response under undrained conditions in sand is gaining increasing interests owing to the recent development of offshore wind farms in seismic regions. Pore pressure evolution in liquefiable soil can significantly ... -
Morphology-Controlled Tensile Mechanical Characteristics in Graphene Allotropes
(Journal article; Peer reviewed, 2017)A number of graphene allotropes constructed by sp3, sp2, and sp hybrid orbitals have recently been proposed to provide the broad potential for practical applications. Here, using molecular dynamics simulation, the structural ... -
Mortar Water Content Impact on Masonry Strength
(Journal article, 2018)Building without sufficient knowledge can entail risk concerning structural safety and resource efficiency. The authors of this paper share the view that mortar water content are subject to large variations, and that the ... -
Mould Models Applicable to Wood-Based Materials – A Generic Framework
(Journal article; Peer reviewed, 2017)This paper systematically reviews mould models that are applicable to wood-based materials. Both similarities and differences are observed with respect to governing factors and their interrelations, methodology, experimental ... -
Moving point load approximation from bridge response signals and its application to bridge Weigh-in-Motion
(Peer reviewed; Journal article, 2021)This paper presents a revised theoretical interpretation for the analysis of bridge response signals arising during a vehicle passage. The derivation shows that it is possible to approximate the forcing function from bridge ... -
A multi-barrier model assisted CAFE method for predicting ductile-to-brittle transition with application to a low-carbon ultrahigh-strength steel
(Peer reviewed; Journal article, 2020)The conventional micromechanical approaches today are still not able to properly predict the ductile-to-brittle transition (DBT) of steels because of their inability to consider the co-operating ductile fracture and cleavage ... -
Multi-level modelling of mechanical anisotropy of commercial pure aluminium plate: Crystal plasticity models, advanced yield functions and parameter identification
(Journal article; Peer reviewed, 2015)The mechanical anisotropy of an AA1050 aluminium plate is studied by the use of five crystal plasticity models and two advanced yield functions. In-plane uniaxial tension properties of the plate were predicted by the ... -
Multi-material adhesively bonded structures: Characterisation and modelling of their rate-dependent performance
(Peer reviewed; Journal article, 2020)The rate-dependent failure response of multi-material adhesive joints for three deformation modes is investigated. A combination of carbon fibre reinforced polymers (CFRP) and titanium alloy Ti-6Al-4V is employed. The ... -
Multi-scale modelling and simulation of ductile failure in aluminium structures
(Doctoral theses at NTNU;2020:374, Doctoral thesis, 2020) -
Multi-scale strategy to estimate the mechanical and diffusive properties of cementitious materials prepared with CEM II/C-M
(Peer reviewed; Journal article, 2022)A procedure to estimate the mechanical and diffusive properties of cement pastes, mortars and concretes made with a novel CEM II/C-M (S-LL) binder that has been developed within the European EnDurCrete project, is presented ...