Browsing Institutt for konstruksjonsteknikk by Title
Now showing items 1039-1058 of 2475
-
Fatigue of high quality pipe girth weld
(Master thesis, 2010)This study aims to investigate the influence of weld toe grinding and center eccentricity to high quality pipe girth welds. A series of 3D FE models with different weld toe geometries and center eccentricity subjected to ... -
Fatigue of simple tubular joints based on DNV-RP-C203
(Master thesis, 2011) -
Fatigue of Threaded Rods Subjected to Axial Load
(Master thesis, 2016)This thesis involves the investigation of threaded rods inserted into glulam elements subjected to axial forces imposed by traffic load in bridges. Fatigue of timber elements and connectors are generally investigated in a ... -
Fatigue of Welded Structures
(Master thesis, 2009) -
Fatigue Strength of Glued-Laminated Timber Loaded in Shear Along Grain and Withdrawal of Threaded Rods.
(Master thesis, 2017)This thesis involves the investigation of both static and fatigue performance of two different longitudinal shear situations. The first being axially loaded threaded rods with small rod to grain angles. The second situation ... -
Fe(II) interaction with cement phases: Method development, wet chemical studies and X-ray absorption spectroscopy
(Peer reviewed; Journal article, 2021)Fe(II) interaction with cement phases was studied by means of co-precipitation and sorption experiments in combination with X-ray absorption fine structure (XAFS) spectroscopy. Oxidation of Fe(II) was fast in alkaline ... -
Feasibility study of high-rise timber buildings using moment resisting frames
(Master thesis, 2017)Multi-story building in Timber -
Feasibility study of reactive mass transport modelling to support service life design: Numerical simulation of chloride ingress
(Research report, 2022)This report discussed the applicability of reactive mass transport (RMT) models for the durability design of concrete structures. The study focussed on supporting service life modeling of chloride-induced reinforcement ... -
FEM Simluations of Shear Waves in the Heart Wall
(Master thesis, 2013)With knowledge of the stiffness of the heart wall, medical personnel can diagnose patients' heart condition. The stiffness of the heart can be altered, e.g. due to a heart attack. New ultrasound technology allows for in ... -
FEM simulations of an Acoustic Radiation Force Impulse applied to a Soft Tissue with a Tumor Inclusion
(Master thesis, 2013)The elastic stiffness properties of soft tissues can be estimated by the use of locally induced displacements and shear waves. In this work, we have made a two-dimensional plane strain finite element model to simulate a ... -
FEM Simulations of Impact Loads on Thermoplastic Structures
(Master thesis, 2010)Thermoplastics are increasingly used in structures where maintaining the structural integrity is important. Finite element analyses are used in order to calculate structural response caused by impact loads and require ... -
FEM- analyse av kompleks betongbygning
(Master thesis, 2011)I løpet av de siste årene har det kommet strukturanalyseprogrammer som har nye metoder for å modellere og analysere konstruksjoner enn tidligere. Et av disse nye programmene er Robot Structural Analysis, der det modelleres ... -
Fiberarmerte betongkonstruksjoner: Materialteknologi, utførelse og prøving av lettbetongbjelker
(Master thesis, 2009) -
Fiberarmerte betongkonstruksjoner: Prøving av bjelker og plater av selvkomprimerende duktil fiberbetong
(Master thesis, 2011)Denne oppgaven omhandler fiberarmeringens virkemåte og bidrag til kapasitet i lastbærende konstruksjoner.Essensen i oppgaven er å bruke rest strekkfastheten fra småbjelketesting, i henhold til NS-EN 14651, til ådimensjonere ... -
Fiberarmerte betongkonstruksjoner: Prøving av prefabrikerte bjelker med oppleggsnese
(Master thesis, 2011)Oppgaven har sett på bruk av fiberarmert betong i lastbærende konstruksjoner med utgangspunkt i en oppleggsnese ved bjelkeende. Det er utført fullskala laboratorieforsøk av 16 bjelkeneser med ulik armering og fiberbetong ... -
Fiberarmerte betongkonstruksjoner: Utprøving av ulike fibertyper i lettbetongbjelker
(Master thesis, 2009) -
Fiberarmerte betongkonstruksjoner: Utprøving av ulike fibertyper i lettbetongbjelker
(Master thesis, 2009) -
Fiberarmerte betongkonstruksjoner: Utprøving av ulike fibertyper i lettbetongbjelker
(Master thesis, 2009) -
Fibre Orientation in Steel-Fibre- Reinforced Concrete: Quantification methods and influence of formwork surface and reinforcement bars in structural elements
(Doctoral thesis at NTNU;2015:229, Doctoral thesis, 2015)The effectiveness of fibres greatly depends on their orientation with regard to the principal tensile stress direction. Consequently, the ability to control fibre orientation during casting would increase the effectiveness ... -
Fibre Reinforced Concrete in Load-Carrying Structures: Structural Behaviour and Evaluation of Calculation Methods
(Master thesis, 2023)Denne masteroppgaven undersøker bruken av fiberarmert betong i bærende konstruksjoner. En fullskala forsøkserie er gjennomført for 16 plateelementer relatert til prosjektet Fibercon. I tillegg er det gjennomført et omfattende ...