Blar i Fakultet for ingeniørvitenskap (IV) på tittel
Viser treff 21474-21493 av 22998
-
Tribocorrosion properties of 25% Cr super duplex stainless steel
(Master thesis, 2009) -
Tribocorrosion-fatigue (multi-degradation) of stainless steel: A fundamental approach in practical conditions
(Doctoral theses at NTNU;2017:056, Doctoral thesis, 2017)In marine and offshore industry, components and systems are exposed to corrosive media, wear and fatigue simultaneously (i.e. multi-degradation). These setups are vastly operated in critical and demanding conditions and ... -
Triboelectrochemical friction control of W- and Ag-doped DLC coatings in water-glycol with ionic liquids as lubricant additives
(Peer reviewed; Journal article, 2022)In the last years, diamond like carbon (DLC) coatings doped with both carbide forming and non-carbide forming metallic elements have attracted great interest as novel self-lubricating coatings. Due to the inherent properties ... -
Tribological Behavior of Polymer Seal Materials in Water-Based Hydraulic Fluids
(Journal article; Peer reviewed, 2018)In this work, two polymer materials have been tested in a lubricated reciprocating pin-on-plate contact geometry using water-based hydraulic fluids to simulate sliding conditions of seal materials used in offshore equipment. ... -
Tribological Testing of Environmentally Acceptable Lubricants for Maritime Applications
(Master thesis, 2016)In marine applications, such as ship stabilizers, manoeuvring or propulsion systems, a number of mechanical components are situated below the waterline. Due to negative effects of lubricant leakage in marine environments, ... -
Tribologisk undersøkelse: Validering av ThermaSiC-belegg
(Bachelor thesis, 2021)Abstract will be available on 2024-07-01 -
Tribologisk/material teknologisk studie: Anvendelse av Termisk Sprøytet ThermaSiC som Slitasjebelegg
(Bachelor thesis, 2020)Abstract will be available on 2023-06-20 -
Tribology at High Temperature and Pressure
(Master thesis, 2010)The thesis consists of a “state of the art study” on different materials resistance to adhesive wear, an investigation of existing and new test method, and an experimental part to address the influence of high pressures ... -
Tribology Mechanisms in Low-Friction Hardbanding Coatings.
(Master thesis, 2013)As the shallow and easily accessible oil and gas reservoirs are becoming depleted, the oil and gas industry has turned its attention towards the deeper and more remote reservoirs. The increased drilling depth, more complex ... -
Tribology Testing of Lubrication and Surface Treatment of Tool Interfaces in Hot Forging of Aluminium
(Master thesis, 2016)This thesis investigated the lubrication conditions in hot forging of aluminium. The most common lubricants to apply in hot forging of aluminium are oil-based and water-based, both containing graphite. Oil-based graphite ... -
Tricuspid Valve Regurgitation in Hypoplastic Left Heart Syndrome: Current Insights and Future Perspectives
(Journal article; Peer reviewed, 2023) -
Trimmet Bygging i Peab Norge AS
(Master thesis, 2009) -
Triple Bottom Line Approach to Individual and Global Sustainability
(Journal article; Peer reviewed, 2010) -
Trondhjemsvegen 3: bolig og forretningsbygg
(Bachelor thesis, 2007)Vårt hovedprosjekt dreier seg om å utføre en rådgivende ingeniørs oppgaver i forbindelse med prosjekteringen av et bygg. Vi har sett på et planlagt bolig- og forretningsbygg i Trondhjemsvegen 3. Bygget er planlagt over 5 ... -
Truck-bicycle safety: an overview of methods of study, risk factors and research needs
(Journal article; Peer reviewed, 2019)The growing numbers of cyclists either injured or killed in accidents caused by trucks have been generally regarded as a safety problem since the 1980s (McCarthy & Gilbert, Accident Analysis & Prevention 28:275–279, 1996). ... -
Truncated least square support vector machine for parameter estimation of a nonlinear manoeuvring model based on PMM tests
(Journal article; Peer reviewed, 2020)A new version of least square support vector machine (LS-SVM), the truncated LS-SVM, is proposed to estimate the nondimensionalized hydrodynamic coefficients. Truncated LS-SVM is shown to be an efficient and robust method ... -
Trygghetsfølelse ved sykling mot kjøreretningen i enveisregulerte gater
(Master thesis, 2019)Flere store norske byer har gjennom bymiljøavtaler og byvekstavtaler forpliktet seg til å oppnå nullvekstmålet, som sier at all vekst i persontransporten i storbyområdene skal tas med kollektivtransport, sykkel og gange. ... -
Trykk vinkelrett på fiberretningen i treelementer
(Master thesis, 2023)Krysslaminerte tre-elementer (Cross-laminated timber (CLT)) erstatter i økende grad flere ikke-fornybare konstruksjonskomponenter. Dette skyldes CLT-platers betydelige potensialt som to-dimensjonale bæreelementer. Ved ... -
Trykkavløpssystem i villastrøk
(Bachelor thesis, 2021)Målet med denne bacheloroppgaven er å vurdere i hvilken grad bruk av trykkavløpssystem vil være en samfunnsøkonomisk bedre løsning enn bruk av tradisjonelt selvfallssystem for sanering av avløpssystemet i et villastrøk i ... -
Trykkbrudd i bjelker av høyfast lettbetong
(Master thesis, 2017)Lettbetong er kjent for sin lave egenvekt og funksjonalitet. Den har et gunstig forhold mellom densitet og styrke, og er godt egnet i bruer og offshorekonstuksjoner. Sammenlignet med normalbetong har lettbetong mange ...