Blar i NTNU Open på tittel
Viser treff 62358-62377 av 104782
-
Modeling and Simulation of Hydraulic Winch Systems for Offshore Cranes
(Master thesis, 2008)This thesis deals with the mathematical modeling and simulation of hydraulic controlled winch systems. Winch systems are commonly used in the hoisting and luffing systems of offshore cranes. When considering the hydraulic ... -
Modeling and Simulation of Hydropower Plant in Scilab
(Master thesis, 2017)A hydro power plant is modeled in a computer application called Scilab, an open source MATLAB clone with capabilities to create block diagrams and do system simulations. The system is designed to do both frequency regulation ... -
Modeling and Simulation of Hypervelocity Impact Against Debris Shields for Spacecraft Protection
(Master thesis, 2017)In this project, IMPETUS Afea Solver was used to simulate hypervelocity impact on Whipple shields. The micrometeoroid and orbital debris environment around the International Space Station was studied in order to understand ... -
Modeling and Simulation of Maritime Systems and Operations for Virtual Prototyping using Co-Simulations
(Doctoral theses at NTNU;2017:374, Doctoral thesis, 2017-12-19) -
Modeling and Simulation of Moored-Floating Structures Using the Tension Element Method
(Peer reviewed; Journal article, 2019)The derivation of a discrete mooring model for floating structures is presented in this paper. The method predicts the steady-state solution for the shape of an elastic cable and the tension forces under consideration of ... -
Modeling and simulation of oil-free liquid-injected screw compressors using ammonia-water mixture as working fluid
(Chapter, 2022)This study investigates the compression process of an oil-free screw compressor with liquid injection for an absorption-compression heat pump (ACHP) with an ammonia-water mixture as working fluid. In recent years, several ... -
Modeling and Simulation of Reactive Three-phase Flows in Fluidized Bed Reactors: Application to the SE-SMR Process
(Doktoravhandlinger ved NTNU, 1503-8181; 2012:377, Doctoral thesis, 2012)In this thesis a reactive binary-particle multi-fluid model for sorption enhanced steam methane reforming (SE-SMR) fluidized bed reactors has been derived. The kinetic theory of granular flows (KTGF) is a applied to close ... -
Modeling and Simulation of Respiratory Flow
(Master thesis, 2019)I denne masteroppgaven presenteres, implementeres, testes og diskuteres en forenklet modell for å simulere respiratorisk strømning. Initialbetingelser og grensebetingelser for både stabile og ustabile strømninger er lagt ... -
Modeling and simulation of rigid body and rod dynamics via geometric methods
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:247, Doctoral thesis, 2009) -
Modeling and simulation of sloshing motion in partly filled tank
(Master thesis, 2015)With the increasing consume of LNG all over the world, transport of LNG through sea becomes more and more important. When LNG carrier is on wave with partly filled tank, sloshing will occur and cause damage to the structure ... -
Modeling and Simulation of the Accumulator During Active Heave Compensation Operations
(Chapter; Peer reviewed, 2016)The paper presents the modeling and simulation of the thermodynamics of the accumulator system of the heave compensation system. Heave compensators in offshore and subsea applications are used to reduce the relative vertical ... -
Modeling and Simulation of the Human Body
(Master thesis, 2016)The theme of this Master Thesis is modeling and simulation of the musculoskeletal system. The purpose is to explore new ways to diagnose the human body, and do so effectively by automation. This Master Thesis investigates ... -
Modeling and simulation of the soft palate for improved understanding of the obstructive sleep apnea syndrome
(Doctoral theses at NTNU;2018:101, Doctoral thesis, 2018)Obstructive sleep apnea (OSA) influences a large part of the population and is increasingly recognized as a major global health problem. For OSA patients, the collapse of the soft palate has been clarified to be a common ... -
Modeling and Simulation of Transient Performance and Emission of Diesel Engine: Pseudo Bond Graph Approach to Modelling the Thermodynamic Process
(Master thesis, 2012)Internal combustion engines have been very successful as power producers in the marineapplicaiton due to their simplicity of construction, high efficiency and long track of proven technology. However, as the environmental ... -
Modeling and Simulations of Reactive Two-Phase Flows in Fluidized Beds
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:161, Doctoral thesis, 2008) -
Modeling and System Identification of the Industrial Manipulator ABB IRB 140
(Master thesis, 2012)NA -
Modeling and Testing of Impact Damage in Composite Pressure Vessels
(Master thesis, 2015)Composite pressure vessels are becoming widely used for transporting gas, lately also hydrogen. In order to enable extensive use of the pressure vessels, it is critical to ensure their societal acceptance, and thus safety ... -
Modeling and testing of small diameter composite tubes under hydrostatic pressure
(Master thesis, 2014)This thesis investigates the behavior of small diameter composite tubes that are exposed to external pressure. Composite tubes have a superior strength to weight ratio compared to steel tubes. The oil industry is facing ... -
Modeling and validation of passive techniques for stabilizing indoor environment in buildings - A case study of the Viking Ship Museum in Norway
(Master thesis, 2018)This thesis investigates how Phase Change Material (PCM) and moisture buffering can stabilize the indoor environment by using a case study of the new Viking Ship museum at Bygdøy outside of Oslo. The museum stores a cultural ... -
Modeling Approach for a Liquid-Injected NH3-H2O Screw Compressor
(Master thesis, 2020)Det er et stort behov for tiltak som kan fremme energieffektivitet i dagens samfunn grunnet stadig økende forbruk av energi og naturressurser. Varmepumpeteknologi er et kraftfullt verktøy for å redusere energiforbruk knyttet ...