• Wet Gas Compressor Performance: A Numerical Investigation of Thermal-Equilibrium in a Centrifugal Compressor Exposed to Wet Gas 

      Mele, Erik (Master thesis, 2012)
      Wet gas compression and subsea compression technology has gained increased focus in the recent years. With aging fields on the Norwegian continental shelf and new discoveries in arctic regions, subsea compression could ...
    • Wet Gas Compressor Surge Detection 

      Jellum, Marie Rennemo (Master thesis, 2013)
      The development of wet gas compressors for installation subsea is key to increase the recovery of oil and gas from the Norwegian Continental Shelf. Safe operation of the compressor depends on understanding of how wet gas ...
    • Wet Gas Compressor Transient Operation 

      Dolve, Ingeborg Mæland (Master thesis, 2018)
      Over the past years, the oil and gas industry has directed its attention towards subsea wet gas compression. Previous research has demonstrated that the operation of subsea wet gas compressors represents challenges related ...
    • Wet Gas Compressor Transients 

      Owren, Bjørn Berge (Master thesis, 2014)
      This master thesis considers three subtasks related to transient operation of wet gas compressors.HYSYS Dynamics is used to establish a dynamic simulation model in the first subtask. The model is designed to predict transient ...
    • Wet Gas Compressors - Stability and Range 

      Ferrara, Veronica (Doctoral thesis at NTNU;2016:230, Doctoral thesis, 2016)
      The oil and gas industry is a large user of turbomachinery. The demand for oil and gas is consistently growing, and changing market conditions require innovative solutions. Operation and optimization of turbomachinery ...
    • Wet Torrefaction of Biomass – Production and Conversion of Hydrochar 

      Bach, Quang-Vu (Doctoral thesis at NTNU;2015:20, Doctoral thesis, 2015)
      Biomass is a renewable and carbon neutral energy resource which has a high potential for replacing fossil fuels. However, the use of biomass for energy applications is not straightforward. It is because native solid ...
    • Wet-chemical deposition of silicon quantum dots for enhanced solar cell efficiency 

      Århus, Åsne (Master thesis, 2011)
      Silicon quantum dots were synthesised wet-chemically by three different methods based on reduction of silicon tetrachloride with the reduction agents potassium naphthalide, sodium cyclopentadiene and the alkalide of ...
    • Wet-granular rheology to measure cuttings-bed strength 

      Pedrosa, Camilo; Ytrehus, Jan David; Aschl, Timothy; Lund, Bjørnar; Saasen, Arild (Journal article; Peer reviewed, 2021)
    • WET: Word embedding-topic distribution vectors for MOOC video lectures dataset 

      Kastrati, Zenun; Kurti, Arianit; Imran, Ali Shariq (Journal article; Peer reviewed, 2020)
      In this article, we present a dataset containing word embeddings and document topic distribution vectors generated from MOOCs video lecture transcripts. Transcripts of 12,032 video lectures from 200 courses were collected ...
    • Wettability Alteration Measurement Using Zeta Potential 

      Trivedi Lay (Master thesis, 2021)
    • Wettability effect on oil recovery using rock-structured microfluidics 

      Yang, Junyi; Saadat, Marzieh; Azizov, Ilgar; Dudek, Marcin; Øye, Gisle; Tsai, Peichun Amy (Peer reviewed; Journal article, 2022)
      Surface wettability has a crucial impact on drop splashing, emulsion dynamics, slip flow for drag reduction, fluid–fluid displacement, and various microfluidic applications. Targeting enhanced oil recovery (EOR) applications, ...
    • Wettability Index for Reservoir Simulation and History Matching Core Displacement Experiments 

      Garstad, Jens Hallvard (Master thesis, 2008)
      A fully coupled formulation for three-phase capillary pressure and relative permeability, the flow parameters, with hysteresis and miscibility capabilities have been established. This work presents an extension to this ...
    • Wettability of cokes by Fe-Mn melt 

      Kaffash, Hamideh; Xing, Xing; Tangstad, Merete (Peer reviewed; Journal article, 2020)
      Four metallurgical cokes were heat treated at 1250 °C to 1550 °C in argon atmosphere. The influence of heat treatment on the microstructure of metallurgical cokes was characterized using X-ray diffraction and Raman ...
    • WETTABILITY OF MOLTEN Fe-Si-B ALLOY ON GRAPHITE, Al2O3, AND h-BN SUBSTRATES 

      Jiao, Jianmeng; Grorud, Bettina; Safarian, Jafar; Tangstad, Merete (Chapter, 2019)
      Fe-26.38Si-9.35B alloy (numbers in mass %) is of interest as a phase change material (PCM) because it exhibits high thermal conductivity, moderate melting point, high latent heat, and low cost. This study offers valuable ...
    • Wettability of Silicon with Refractory Materials: A Review 

      Ciftja, Arjan (Research report, 2008)
      The wettability of ceramics by liquid metals is a key fac¬tor in many fields of high temperature materials science and engineering. The wetting behavior of liquid-silicon/refractory-materials system is especially important ...
    • Wettability of Solar GradeSilicon on Silicon Nitride Coated Silica 

      Brynjulfsen, Ingvild Margrete (Master thesis, 2009)
    • Wettability Variations within the North Sea Oil Field Frøy 

      Tangen, Mathias (Master thesis, 2012)
      Wettability is one of the most important parameters governing the rate of oil recovery from a porous medium. This thesis is a study of the wettability variations within the Frøy field in the North Sea, and its effect on ...
    • Wettable TiB<inf>2</inf> Cathode for Aluminum Electrolysis: A Review 

      Padamata, Sai Krishna; Singh, Kamaljeet; Haarberg, Geir Martin; Saevarsdottir, Gudrun (Peer reviewed; Journal article, 2022)
      Titanium diboride (TiB2) is considered a promising material for wettable cathodes in aluminum electrolysis. The demand for wettable cathodes is associated with the development of inert anode technologies to eliminate CO2 ...
    • Wetting Behavior and Reactivity of Molten Silicon with h-BN Substrate at Ultrahigh Temperatures up to 1750 °C 

      Polkowski, Wojciech; Sobczak, Natalia; Nowak, Rafal; Kudyba, Artur; Bruzda, Grzegorz; Polkowska, Adelajda; Homa, Marta; Turalska, Patrycja; Tangstad, Merete; Safarian, Jafar; Moosavi-Khoonsari, Elmira; Datas, Alejandro (Journal article; Peer reviewed, 2017)
      For a successful implementation of newly proposed silicon-based latent heat thermal energy storage systems, proper ceramic materials that could withstand a contact heating with molten silicon at temperatures much higher ...
    • Wetting of Carbon Cathodes by Molten Electrolyte and Aluminium 

      Senanu, Samuel; Ratvik, Arne Petter; Wang, Zhaohui; Grande, Tor (Journal article; Peer reviewed, 2021)
      The extent to which the carbon cathode is wetted by molten electrolyte or molten aluminium metal is important for understanding the cathode wear during aluminium electrolysis. The present paper reports on a laboratory study ...