Blar i Publikasjoner fra CRIStin - NTNU på tittel
Viser treff 22532-22551 av 38525
-
Modeling Periodic Energy-Harvesting Computing Systems
(Peer reviewed; Journal article, 2021)The Internet of Things (IoT) requires Ultra-Low Power (ULP) systems that communicate wirelessly and solely rely on harvested energy to scalably interact with the environment. This is challenging for IoT developers because ... -
Modeling porous coastal structures using a level set method based VRANS-solver on staggered grids
(Peer reviewed; Journal article, 2020)Several engineering problems in the field of coastal and offshore engineering involve flow interaction with porous structures such as breakwaters, sediment screens, and scour protection devices. In this paper, the interaction ... -
Modeling radiation in particle clouds: on the importance of inter-particle radiation for pulverized solid fuel combustion
(Journal article; Peer reviewed, 2014)The importance of inter-particle radiation for clusters of gray and diffuse particles is investigated. The radiative cooling of each individual particle is found to vary strongly with its position in the cluster, and a ... -
Modeling salmon lice effects on sea trout population dynamics using an individual-based approach
(Peer reviewed; Journal article, 2021)Salmon lice Lepeophtheirus salmonis infestation of sea trout Salmo trutta results in both additional marine mortality and behavioral changes which may contribute to sea trout population decline. For effective management ... -
Modeling Solar Orbiter dust detection rates in the inner heliosphere as a Poisson process
(Peer reviewed; Journal article, 2023)Context. Solar Orbiter provides dust detection capability in the inner heliosphere, but estimating physical properties of detected dust from the collected data is far from straightforward. Aims. First, a physical model ... -
Modeling sound scattering using a combination of the edge source integral equation and the boundary element method
(Journal article; Peer reviewed, 2018)A hybrid method for sound scattering calculations is presented in this paper. The boundary element method (BEM) is combined with a recently developed edge source integral equation (ESIE) [J. Acoust. Soc. Am. 133, 3681–3691 ... -
Modeling Spatial Aspects of Safety-Critical Systems with FOCUS-ST
(Journal article; Peer reviewed, 2014)This paper presents an approach for modeling and veri - cation of components controlling behaviour of safety-critical systems in their physical environment. In particular, we introduce the modeling language FocusST that ... -
Modeling strain-path changes in aluminum and steel
(Journal article, 2017)The present paper evaluates two phenomenological plasticity models which account for the influence of strain-path change (SPC) on the stress-strain behavior. The HAH model (Barlat et al., 2014) is modified to capture SPC ... -
Modeling superior predictors for crude oil prices
(Journal article; Peer reviewed, 2017)A common perception in the literature is that oil price dynamics are most adequately explained by fundamental supply-and-demand factors. We use a general-to-specific approach and find that financial indicators are even ... -
Modeling temperature effects in anaerobic digestion of domestic wastewater
(Journal article; Peer reviewed, 2018)A combination of septic tank (ST) and up-flow anaerobic sludge blanket (UASB) as treatment for domestic wastewater was modeled with the anaerobic digestion model 1 (ADM1). The model was used to visualize the influence of ... -
Modeling the diffusion-weighted imaging signal for breast lesions in the b = 200 to 3000 s/mm 2 range: quality of fit and classification accuracy for different representations
(Peer reviewed; Journal article, 2020)Purpose To evaluate different non‐Gaussian representations for the diffusion‐weighted imaging (DWI) signal in the b‐value range 200 to 3000 s/mm2 in benign and malignant breast lesions. Methods Forty‐three patients ... -
Modeling the Effect of Excess Vacancies on Precipitation and Mechanical Properties of Al–Mg–Si Alloys
(Peer reviewed; Journal article, 2023)A model for vacancy annihilation during aging has been combined with a precipitation model for coupled nucleation, growth, and coarsening in AA 6xxx series aluminum alloys. The simulation results were compared with ... -
Modeling the effect of notch geometry on the deformation of a strongly anisotropic aluminum alloy
(Peer reviewed; Journal article, 2020)In this study, an elastic-plastic model with yielding described by a newly proposed orthotropic yield criterion was used to model the unusual deformation of a strongly textured AA6060 alloy. Available experimental data ... -
Modeling the effects of alternative mitigation measures on Atlantic salmon production in a regulated river.
(Journal article; Peer reviewed, 2017)As part of the investigation of a new and optimized environmental flow regime in a regulated river (Mandalselva, Norway), a modeling study was conducted on the trade-offs between the production of Atlantic salmon (Salmo ... -
Modeling the effects of variable tariffs on domestic electric load profiles by use of occupant behavior submodels
(Journal article; Peer reviewed, 2017)Emerging infrastructure for residential meter communication and data processing carries the potential to control household electrical demand within local power system constraints. Deferral of load control can be incentivized ... -
Modeling the Flow Around and the Hydrodynamic Drag on Net Meshes Using reef3d
(Journal article; Peer reviewed, 2022) -
Modeling the Formation of Degradation Compounds during Thermal Degradation of MEA
(Peer reviewed; Journal article, 2022)A kinetic model has been developed to predict thermal degradation of aqueous solutions of monoethanolamine (MEA) in carbon capture. The model focusses on both the degradation rate of the amine and the formation rates of ... -
Modeling the Growth of Clostridium beijerinckii NCIMB 8052 on Lignocellulosic Sugars
(Peer reviewed; Journal article, 2018)To our knowledge, this is the first growth model of Clostridium beijerinckii NCIMB 8052 on glucose and xylose as representative lignocellulosic sugars, which considers the synergistic effects of sugars on the growth rate. ... -
Modeling the impact of indoor relative humidity on the infection risk of five respiratory airborne viruses
(Journal article; Peer reviewed, 2022) -
Modeling the influence of eutrophication and redox conditions on mercury cycling at the sediment-water interface in the Berre Lagoon
(Journal article; Peer reviewed, 2018)This study presents a specifically designed Mercury module in a coupled benthic-pelagic reactive-transport model - Bottom RedOx Model (BROM) that allows to study mercury (Hg) biogeochemistry under different conditions. ...