Blar i Publikasjoner fra CRIStin - NTNU på tittel
Viser treff 2398-2417 av 37687
-
Application of a New Empirical Model for Rheology Prediction of Cement Pastes Modified with Filler from Manufactured Sand
(Journal article; Peer reviewed, 2021)There is a need for simple but precise prediction models for proportioning concrete with manufactured sand, for use in ready-mix concrete production. For the last two decades, the particle-matrix model has been used in ... -
Application of a PI-controller to a 25 MW Floating Wind Turbine
(Chapter, 2022)Proportional-integral controllers are extensively applied to the pitch control of wind turbines. Despite its simplicity, this control strategy achieves good performance in onshore applications. However, the application of ... -
Application of a Pseudo-Kinetic Generalized Serverity Model to the Concentrated Sulfuric Acid Hydrolysis of Pinewood and Aspenwood
(Journal article; Peer reviewed, 2012)The yield of monosaccharides after two-stage concentrated sulfuric acid hydrolysis of softwood (Scots pine) and hardwood (trembling aspen) was modeled using a generalized severity parameter with a time-independent rate ... -
Application of a Rapid and Simple UV-spectrophotometric method for the study of desorption of esterquat collectors in Tailings-Seawater Systems
(Journal article; Peer reviewed, 2018)The growing demand for mineral resources followed by the steady increase in mining activity result in the need for the disposal of large amount of tailings. Submarine tailings placements (STPs) is a viable option to ... -
Application of a sea surface roughness formula using joint statistics of significant wave height and spectral wave steepness
(Journal article; Peer reviewed, 2020)This article provides some statistical features of the sea surface roughness given as a function of the spectral wave steepness and the significant wave height suggested by Taylor and Yelland (J Phys Oceanogr 31:572–590, ... -
Application of a Simplified Anisotropic Constitutive Model for Soft Structured Clay on Embankment Failure
(Peer reviewed; Journal article, 2021)The design and maintenance of embankments is still a challenge in practical geotechnical engineering because of some features of soft sensitive soil behavior that are not considered in conventional methods. These features ... -
Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens
(Journal article, 2018)Mixed mode brittle fracture behaviour of granite rock is studied experimentally and theoretically using Asymmetric Four Point Bend (AFPB) specimens containing pre-cracks subjected to different mixed mode loading conditions, ... -
Application of an Equiaxed Grain Growth and Transport Model to Study Macrosegregation in a DC Casting Experiment
(Peer reviewed; Journal article, 2019)A simplified three-phase, multiscale macrosegregation model which describes the growth kinetics of equiaxed grains and the coupling between microstructure morphology and the macroscopic transport has been proposed previously. ... -
Application of an ontology based process model construction tool for active protective coatings: Corrosion inhibitor release
(Chapter, 2021)Ontology-based integrated materials modelling for an active protective coating system design is presented and applied to a practical example. For this purpose, an ontological methodology implemented using the ProMo (Process ... -
Application of Arbitrary Lagrangian-Eulerian Strips with Fully Nonlinear Wave Kinematics for Force Estimation
(Journal article; Peer reviewed, 2022)The initial design of offshore constructions generally uses a combination of model tests and second-order wave theory to reconstruct the wave kinematics to determine wave forces using the Morison equation. This routine ... -
Application of Assistive Technologies in Smart Cities
(Chapter, 2021)Urban areas in the European Union (EU) are ageing fast. As part of the "Operational Programme for the Implementation of the European Cohesion Policy for the period 2014-2020", some EU member-states have prioritised promoting ... -
Application of ATR-FTIR Spectroscopy to Compare the Cell Materials of Wood Decay Fungi with Wood Mould Fungi
(Journal article; Peer reviewed, 2015)Wood fungi create vast damage among standing trees and all types of wood materials. The objectives of this study are to (a) characterize the cell materials of two major wood decay fungi (Basidiomycota), namely, Trametes ... -
Application of biopolymer schizophyllan derived from local sources in Malaysia for polymer flooding operation
(Peer reviewed; Journal article, 2022)After the application of primary and secondary recovery methods, a significant amount of oil gets left behind in the reservoir. Thus, Enhanced Oil Recovery (EOR) methods are the only viable options. Polymer flooding has ... -
Application of conditional random fields for the reliability assessment of slope stability
(Chapter, 2017)This study employs conditional random fields to integrate different sources of information on soil properties in the reliability assessment of slope stability in Rissa, Norway. The reliability assessment is conducted to ... -
Application of Continuous Integration in Decision Support and Integrity Management Systems of Offshore Structures
(Chapter, 2019)Simulation-based decision support systems play an important role in safe operation of offshore floating platforms. These systems, which consist of digital models, simulators, and analysis procedures, are subject to continuous ... -
Application of Data-Driven Economic NMPC on a Gas Lifted Well Network
(Journal article; Peer reviewed, 2021)The Daily Production Optimization (DPO) problem is the task of maximizing production of hydrocarbons subject to operational constraints. Handling of uncertainty in model structure and parameters is of high importance to ... -
Application of data-driven models in the analysis of marine power systems
(Peer reviewed; Journal article, 2019)Computational thinking and coding are becoming an integral part of K-12 education, with female students being underrepresented in such subjects. The proliferation of technological tools and programming environments offers ... -
Application of Digital Twins in Condition-Based Maintenance
(Chapter, 2021)Condition-based Maintenance (CBM) is a combination of fault diagnosis, fault prognosis, and maintenance decisions. The diagnostic results can be used to predict the remaining life and maintenance plans are made based on ... -
Application of Digitalization in Real-Time Analysis of Drilling Dynamics Using Along-String Measurement (ASM) Data Along Wired Pipes
(Peer reviewed; Journal article, 2022)An automated drilling system requires a real-time evaluation of the drilling bit during drilling to optimize operation and determine when to stop drilling and switch bits. Furthermore, in the dynamic modeling of drill ... -
Application of EBSD technique to ultrafine grained and nanostructured materials processed by severe plastic deformation: Sample preparation, parameters optimization and analysis
(Journal article; Peer reviewed, 2012)With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution (∼0.5°). Fast development of EBSD speed (up ...