Browsing Publikasjoner fra CRIStin - NTNU by Title
Now showing items 17680-17699 of 37384
-
The influence of milling induced residual stress on fatigue life of aluminum alloys
(Peer reviewed; Journal article, 2022)The effect of machining strategies on the surface integrity have received minimal consideration as this fluid situation develops, specifically, the machining induced residual stress generated in the material during milling. ... -
Influence of motion coupling and nonlinear effects on parametric roll for a floating production storage and offloading platform
(Journal article; Peer reviewed, 2015)Occurrence and features of parametric roll (PR) on a weather-vaning floating production storage and offloading (FPSO) platform with a turret single-point mooring-line system are examined. The main focus is on the relevance ... -
The influence of motor tasks and cut-off parameter selection on artifact subspace reconstruction in EEG recordings
(Peer reviewed; Journal article, 2020)Advances in EEG filtering algorithms enable analysis of EEG recorded during motor tasks. Although methods such as artifact subspace reconstruction (ASR) can remove transient artifacts automatically, there is virtually no ... -
The influence of multidirectional leakage flux on transformer core losses
(Peer reviewed; Journal article, 2021)In a power transformer, the leakage flux enters the laminations of the iron core in different directions. Depending on the orientation of the leakage flux, it can add eddy current and hysteresis losses to the well-documented ... -
Influence of Multiple Linear Infrastructure on Diversity of Small Mammals in Mikumi National Park, Tanzania
(Journal article, 2019)The need for rapid development in developing countries has led to establishment of major public infrastructure even in biodiversity rich protected areas. Mikumi National Park in central Tanzania is traversed by five such ... -
Influence of NaCl Aqueous Solution on Compacted Snow: Field Investigation
(Peer reviewed; Journal article, 2020)Slippery road surfaces are a threat to traffic safety, especially in winter when snow falling on roads forms a hard crust that is extremely difficult to remove. To prevent this hard crust formation, salt is applied to ... -
The Influence of Nanometals, Dispersed in the Electrophoretic Nanohydroxyapatite Coatings on the Ti13Zr13Nb Alloy, on Their Morphology and Mechanical Properties
(Peer reviewed; Journal article, 2021)In this work, nanohydroxyapatite coatings with nanosilver and nanocopper have been fabricated and studied. The presented results concern coatings with a chemical composition that has never been proposed before. The present ... -
Influence of Nanopillar Arrays on Fibroblast Motility, Adhesion, and Migration Mechanisms
(Journal article; Peer reviewed, 2019)Surfaces decorated with high aspect ratio nanostructures are a promising tool to study cellular processes and design novel devices to control cellular behavior. However, little is known about the dynamics of cellular ... -
Influence of natural aging and ramping before artificial aging on the microstructure of two different 6xxx alloys
(Peer reviewed; Journal article, 2022)In this study the effect of a ramp up to artificial aging (AA) temperature in combination with natural aging (NA) was analyzed for two different industrial aluminium alloys. The alloys differ in their Mg/Si ratio as well ... -
Influence of Nb on the Microstructure and Fracture Toughness of (Zr0.76Fe0.24)100−xNbx Nano-Eutectic Composites
(Journal article; Peer reviewed, 2018)The present study demonstrates the evolution of eutectic microstructure in arc-melted (Zr0.76Fe0.24)100−xNbx (0 ≤ x ≤ 10 atom %) composites containing α-Zr//FeZr2 nano-lamellae phases along with pro-eutectic Zr-rich ... -
Influence of nitrogen limitation on lipid accumulation and EPA and DHA content in four marine microalgae for possible use in aquafeed
(Journal article; Peer reviewed, 2019)Microalgae are regarded as a promising alternative that can replace fishmeal and fish oil in aquaculture. Under N-limitation, many microalgae species change their carbon storage patterns in favor of neutral lipids (NLs) ... -
Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading
(Journal article; Peer reviewed, 2019)A series of strain-controlled multiaxial low cycle fatigue (LCF) tests under proportional and non-proportional loading conditions have been conducted on notched specimens. Cylindrical bars of Al 6061 aluminum alloy and ... -
Influence of occupant behavior and operation on performance of a residential Zero Emission Building in Norway
(Journal article; Peer reviewed, 2018)It has been proven that occupant behavior may significantly change building energy performance. The effect of the occupant behavior is becoming even bigger when it comes to highly energy efficient buildings. Specifically ... -
Influence of occupant behavior and operation on performance of a residential Zero Emission Building in Norway
(Journal article; Peer reviewed, 2018)It has been proven that occupant behavior may significantly change building energy performance. The effect of the occupant behavior is becoming even bigger when it comes to highly energy efficient buildings. Specifically ... -
Influence of operability criteria limiting values on ship speed
(Journal article; Peer reviewed, 2016)When the ship is caught in heavy seas, there are two manoeuvres that the shipmaster can undertake to avoid excessive ship motion and hull damage: changing course or voluntary speed reduction. This paper presents a study ... -
Influence of operating parameters on nanobubble-assisted flotation of graphite
(Journal article; Peer reviewed, 2022) -
Influence of particle content on the ductility of extruded non-recrystallized aluminium alloys subjected to shear loading
(Peer reviewed; Journal article, 2022)In-plane shear tests were conducted on two extruded 6000-series aluminium alloys to investigate the influence of constituent particles on ductile fracture. The two alloys have previously been characterized and found to ... -
The Influence of Particle Size on Sliding Wear of a Convex Pattern Surface
(Peer reviewed; Journal article, 2022)Sliding wear of bulk handling equipment (e.g., shovel bucket, mill and transfer chute) can be dramatically reduced by using a convex pattern surface compared to a flat surface, by adjusting the flow behavior of particles ... -
The Influence of Particle Size on Sliding Wear of a Convex Pattern Surface
(Peer reviewed; Journal article, 2022)Sliding wear of bulk handling equipment (e.g., shovel bucket, mill and transfer chute) can be dramatically reduced by using a convex pattern surface compared to a flat surface, by adjusting the flow behavior of particles ... -
Influence of patient-specific rehearsal on operative metrics and technical success for endovascular aneurysm repair
(Peer reviewed; Journal article, 2020)Introduction: Patient-specific rehearsal (PsR) is a recent technology within virtual reality (VR) simulation that lets the operators train on patient-specific data in a simulated environment prior to the procedure. ...