Vis enkel innførsel

dc.contributor.advisorSotirios Grammatikos
dc.contributor.authorTollum, Anders
dc.contributor.authorEliassen, Sindre Thunshelle
dc.date.accessioned2019-09-06T14:01:12Z
dc.date.available2019-09-06T14:01:12Z
dc.date.issued2019
dc.identifier.urihttp://hdl.handle.net/11250/2613114
dc.description.abstractInnledning: 3D-TEC er en ideell organisasjon som ble startet og drives av studenter ved NTNU i Gjøvik. Medlemmene i prosjektet jobber aktivt mot utvikling av en ny type elbil med fokus på skreddersydd design, modularitet og 3D-printede karosserideler i resirkulerbar plast. Bakgrunnen for resirkulerbart materiale er et ønske om pant- og gjenbruksordning av delene. Hensikt: Målet for bacheloroppgaven er å virkeliggjøre 3D-TEC sin idé bak 3D-printede karosserideler av resirkulerbar plast til sin første prototype. Gjennomføring: Dette er et aktuelt område innen innovasjon, derfor vil mye av arbeidet gå ut på forskning om hvordan dette kan gjøres. Oppgaven vil ha fokus på materiale, design, resirkulering og oppbygging av delene. Resultat: Resultatene i oppgaven svarer til mulige ideer og løsninger på hvordan resirkulerbart materiale kan brukes i produksjon av karosserideler. Konklusjon: Fra tester utført i oppgaven konkluderes det med at ideen til 3D-TEC kan virkeliggjøres. Det er helt klart flere utfordringer, men denne oppgaven har lagt et godt fundament for videre forskning.
dc.description.abstractIntroduction: 3D-TEC is a non-profit organization that was started and run by students at NTNU in Gjøvik. The members of the project are actively working on the development of a new type of electric car with a focus on tailor-made design, modularity and 3D-printed body parts in recyclable plastic. The reason for recyclable material is a desire for mortgage and re-use of the parts. Purpose: The goal of the Bachelor thesis is to realize 3D-TEC's idea behind 3D-printed body parts of recyclable plastic for its first prototype. Implementation: This is a relevant area of innovation, so much of the work will go into research on how this can be done. The assignment will focus on materials, design, recycling and structure for the parts. Result: The results of the assignment correspond to possible ideas and solutions on how recyclable material can be used in the production of body parts. Conclusion: From tests performed in the thesis, it is concluded that 3D-TEC`s idea can be realized. There are clearly several challenges, but this task has laid a good foundation for further research.
dc.languagenob
dc.publisherNTNU
dc.titleModularitet i 3D-printede karosserideler av resirkulerbar plast
dc.typeBachelor thesis


Tilhørende fil(er)

FilerStørrelseFormatVis

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel