An 11.0 bit ENOB, 9.8 fJ/conv.-step noise-shaping SAR ADC calibrated by least squares estimation
Journal article, Peer reviewed
Accepted version
![Thumbnail](/ntnu-xmlui/bitstream/handle/11250/2480319/PID4567421.pdf.jpg?sequence=5&isAllowed=y)
View/ Open
Date
2017Metadata
Show full item recordCollections
Original version
10.1109/CICC.2017.7993659Abstract
A noise-shaping SAR ADC implemented in 28 nm UTBB FDSOI is presented. A cascaded FIR-IIR loop filter topology is used, and implemented as an inverter-based switched-capacitor circuit. The loop filter also employs input buffers. To correct CDAC mismatch, an off-line calibration technique that estimates the CDAC calibration coefficients from a digitized test sequence is proposed and used. At 28 MS/s and Nyquist bandwidth of 1.75 MHz, the measured accuracy is 11.0 bit ENOB, and the Walden FOM 9.8 fJ/conv.-step.