## Simulating riser VIV in current and waves using an empirical time domain model

##### Chapter, Peer reviewed

##### Accepted version

##### Permanent lenke

http://hdl.handle.net/11250/2468232##### Utgivelsesdato

2017##### Metadata

Vis full innførsel##### Samlinger

- Institutt for marin teknikk [2317]
- Publikasjoner fra CRIStin - NTNU [19179]

##### Originalversjon

10.1115/OMAE2017-61217##### Sammendrag

The theoretical background of an empirical model for time domain simulation of VIV is reviewed. This model allows the surrounding flow to be time varying, which is in contrast to the traditional frequency domain tools. The hydrodynamic load model consists of Morison’s equation plus an additional term representing the oscillating effect of vortex shedding. The magnitude of the vortex shedding force is given by a dimensionless coefficient, and this force is assumed to act perpendicular to the relative velocity between the cylinder and the fluid. The time variability of the vortex shedding force is described by a synchronization model, which captures how the instantaneous frequency reacts to cylinder motion.
The parameters in the time domain load model are calibrated against a commonly used frequency domain VIV analysis tool, VIVANA. To do this, a finite element model of a vertical tensioned riser is established, and the structure is exposed to a linearly sheared flow. Key results such as cross-flow displacements along the riser, frequency content, r.m.s. of bending stresses and mean in-line displacements are compared, and it is shown that the frequency and time domain methods are close to equivalent in this simple case with stationary flow.
Finally, the time domain model is utilized to study VIV of a riser subjected to regular waves. The characteristics of wave induced VIV are discussed in light of the simulation results. It is seen that VIV is excited in the zone close to the surface, and the energy is transported downwards as traveling waves. The vibrations typically build up as the horizontal water particle velocity is high, and die out as the velocity decreases. The effect of varying the wave amplitude and period is investigated, and it is found that the dominating frequency, mode and r.m.s. stresses increase together with the wave height. The effect of the wave period is however more complicated. For example, reducing the wave period increases the dominating mode but decreases the displacements. Hence the stress may increase or decrease, depending on which of these effects are strongest.