In situ and operando observation of surface oxides during oxygen evolution reaction on copper
Journal article, Peer reviewed
Date
2017Metadata
Show full item recordCollections
- Institutt for materialteknologi [2549]
- Publikasjoner fra CRIStin - NTNU [38294]
Abstract
Formation and dissolution of oxide on copper under transpassive conditions, i.e. during OER and transpassive dissolution, in alkaline electrolyte was investigated by a combination of electrochemical techniques and in situ and operando Raman and photoluminescence (PL) spectroscopy, as well as spectropscopic ellipsometry. Experiments were conducted under potentiodynamic and potentiostatic polarisation in 0.1M NaOH. In chronoamperometry experiments with steps between potentials, oxide thickness continued increasing beyond the onset of OER. The thickness dropped significantly from >10 nm to <5 nm ≈400 mV above the OER onset. The presence of CuO, Cu2O and Cu4O3 was observed by Raman spectroscopy after the onset of OER. Correlating with the thickness drop, strong PL was observed at 1.55 eV, indicating the formation of singly charged oxygen vacancies VView the MathML source, following the classical PL spectrum interpretation from the literature. PL observation speaks against vacancy pair coalescence as mechanism of dissolution. After electrochemical experiments, the films were n-type semiconductors, not p-type conductors as expected for copper oxides. Results indicate that transpassive dissolution may be triggered by the instability of the oxide with respect to defect formation.