Browsing Institutt for vareproduksjon og byggteknikk by Journals "Materials"
Now showing items 1-14 of 14
-
3D printed thermoelectric polyurethane/multiwalled carbon nanotube nanocomposites: A novel approach towards the fabrication of flexible and stretchable organic thermoelectrics
(Peer reviewed; Journal article, 2020)Three-dimensional (3D) printing of thermoelectric polymer nanocomposites is reported for the first time employing flexible, stretchable and electrically conductive 3D printable thermoplastic polyurethane (TPU)/multiwalled ... -
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines
(Journal article; Peer reviewed, 2017)Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, ... -
Evaluation of Mechanical and Environmental Properties of Engineered Alkali-Activated Green Mortar
(Peer reviewed; Journal article, 2020)Currently, alkali-activated binders using industrial wastes are considered an environmentally friendly alternative to ordinary Portland cement (OPC), which contributes to addressing the high levels of carbon dioxide (CO2) ... -
Gum arabic nanoparticles as green corrosion inhibitor for reinforced concrete exposed to carbon dioxide environment
(Peer reviewed; Journal article, 2021)The inhibiting effect of Gum Arabic-nanoparticles (GA-NPs) to control the corrosion of reinforced concrete that exposed to carbon dioxide environment for 180 days has been investigated. The steel reinforcement of concrete ... -
Influence of Nb on the Microstructure and Fracture Toughness of (Zr0.76Fe0.24)100−xNbx Nano-Eutectic Composites
(Journal article; Peer reviewed, 2018)The present study demonstrates the evolution of eutectic microstructure in arc-melted (Zr0.76Fe0.24)100−xNbx (0 ≤ x ≤ 10 atom %) composites containing α-Zr//FeZr2 nano-lamellae phases along with pro-eutectic Zr-rich ... -
Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
(Journal article; Peer reviewed, 2018)Selective laser melting (SLM) is one of the additive manufacturing technologies that allows for the production of parts with complex shapes from either powder feedstock or from wires. Aluminum alloys have a great potential ... -
On the Response to Hygrothermal Ageing of Fully Recyclable Flax and Glass Fibre Reinforced Polymer Composites
(Peer reviewed; Journal article, 2023)The present work studies the response to hygrothermal ageing of natural fibre composites (NFCs) against synthetic fibre composites when using three different types of polymers as matrices. For ageing, coupons were fully ... -
Optimization of the filler concentration on fused filament fabrication 3d printed polypropylene with titanium dioxide nanocomposites
(Peer reviewed; Journal article, 2021)Polypropylene (PP) is an engineered thermoplastic polymer widely used in various applications. This work aims to enhance the properties of PP with the introduction of titanium dioxide (TiO2) nanoparticles (NPs) as nanofillers. ... -
Performance Evaluation of Modified Rubberized Concrete Exposed to Aggressive Environments
(Peer reviewed; Journal article, 2021)Recycling of the waste rubber tire crumbs (WRTCs) for the concretes production generated renewed interest worldwide. The insertion of such waste as a substitute for the natural aggregates in the concretes is an emergent ... -
Performance of Epoxy Resin Polymer as Self-Healing Cementitious Materials Agent in Mortar
(Journal article; Peer reviewed, 2021) -
Permeable nanomontmorillonite and fibre reinforced cementitious binders
(Journal article; Peer reviewed, 2019)Clinker reduction in cementitious binders is of paramount importance today, and nanotechnology has extended permissible limits. In the present study, a reference binder consisting of 60% Portland cement, 20% limestone, 20% ... -
Sustainable Additive Manufacturing: Mechanical Response of Polyethylene Terephthalate Glycol over Multiple Recycling Processes
(Journal article; Peer reviewed, 2021) -
Three-Dimensional (3D) Conductive Network of CNT-Modified Short Jute Fiber-Reinforced Natural Rubber: Hierarchical CNT-Enabled Thermoelectric and Electrically Conductive Composite Interfaces
(Peer reviewed; Journal article, 2020)Jute fibers (JFs) coated with multiwall carbon nanotubes (MWCNTs) have been introduced in a natural rubber (NR) matrix creating a three-dimensional (3D) electrically conductive percolated network. The JF-CNT endowed ... -
Towards Selection Charts for Epoxy Resin, Unsaturated Polyester Resin and Their Fibre-Fabric Composites with Flame Retardants
(Peer reviewed; Journal article, 2021)Epoxy and unsaturated polyester resins are the most used thermosetting polymers. They are commonly used in electronics, construction, marine, automotive and aircraft industries. Moreover, reinforcing both epoxy and unsaturated ...