• norsk
    • English
  • norsk 
    • norsk
    • English
  • Logg inn
Vis innførsel 
  •   Hjem
  • Fakultet for ingeniørvitenskap (IV)
  • Institutt for geovitenskap og petroleum
  • Vis innførsel
  •   Hjem
  • Fakultet for ingeniørvitenskap (IV)
  • Institutt for geovitenskap og petroleum
  • Vis innførsel
JavaScript is disabled for your browser. Some features of this site may not work without it.

Estimation of Seismic Parameters by Source Strength Variation: An Experimental Analysis using Valhall Data

Jakobsen, Fredrik G
Master thesis
Thumbnail
Åpne
649675_COVER01.pdf (184.2Kb)
649675_FULLTEXT01.pdf (4.071Mb)
Permanent lenke
http://hdl.handle.net/11250/240150
Utgivelsesdato
2013
Metadata
Vis full innførsel
Samlinger
  • Institutt for geovitenskap og petroleum [1834]
Sammendrag
In 2008 at SEG's annual meeting Professor Martin Landrø proposed a new way of deriving 4D noise by source strength variation. It was proposed that by shooting two surveys over the exact same area and process the datasets as two surveys in a 4D survey, the sensitivity of the 4D set-up could be determined. Based on this proposal BP Norge decided to shot a test with firing pressure 1750 psi, in contrast to the 2000 psi production pressure. These two datasets constitutes the data analysed in this thesis. No known work has been done one this type of data and an experimental approach was used in order to find application for the extra information given by varying the source strength.Several analysis done on the amplitude effect of the pressure variation suggested a less dramatical change in amplitude (around 5\%) than the established literature suggested (8.5\%). The frequency dependence of the amplitude change has also been investigated and is still not perfectly understood.Estimation of a noise profile has been done by several different methods suggesting both a continuously increase in noise with depth as well as a more intricate behaviour. The validity of these noise estiamtion are not perfectly understood and care should be given when evaluating the results.A new method for deriving the formation quality factor is also proposed. This method is considered to have great potential and although the derived quality factors were found to be inconsistent and illogical, it is believed that with better processing and greater source amplitude change this method could be used by the industry.
Utgiver
Institutt for petroleumsteknologi og anvendt geofysikk

Kontakt oss | Gi tilbakemelding

Personvernerklæring
DSpace software copyright © 2002-2019  DuraSpace

Levert av  Unit
 

 

Bla i

Hele arkivetDelarkiv og samlingerUtgivelsesdatoForfattereTitlerEmneordDokumenttyperTidsskrifterDenne samlingenUtgivelsesdatoForfattereTitlerEmneordDokumenttyperTidsskrifter

Min side

Logg inn

Statistikk

Besøksstatistikk

Kontakt oss | Gi tilbakemelding

Personvernerklæring
DSpace software copyright © 2002-2019  DuraSpace

Levert av  Unit