Programming turbulence models in FORTRAN
Master thesis
Permanent lenke
http://hdl.handle.net/11250/2350060Utgivelsesdato
2015Metadata
Vis full innførselSamlinger
Sammendrag
The two-equation turbulence models Wilcox k-omega and Menter k-omega SST are programmed in FORTRAN and tested on the cases channel flow and backward-facing step. A short time step and a good initial field is required to obtain a solution. Results are adequate for most engineering purposes with a 15 \% error in predicted reattachment length. Gain from parallel programming is only found on the elliptic equation solver.