Blar i Institutt for maskinteknikk og produksjon på tittel

Viser treff 762-781 av 3979

    • Cross-acceptance of fire safety systems based on SIL equivalence in relation to IEC 61508 and EN 50129 

      Okoh, Peter; Dong, Hyunsoo; Liu, Yiliu (Peer reviewed; Journal article, 2022)
      Several sectors, e.g. process, railway, etc., have set their functional safety standards based on the generic IEC 61508. Yet, a product that is originally developed based on IEC 61508 is not automatically accepted for use ...

    • A Cross-disciplinary, cross-organizational approach to sustainable design and product innovation in the aluminum industry 

      Fragapane, Giuseppe; Schulte, Kjersti Øverbø; Eleftheriadis, Ragnhild; Reke, Eivind; Ringen, Geir (Peer reviewed; Journal article, 2022)
      Aluminum is a promising sustainable and industrial resource that provides strong, lightweight structures with complex geometric possibilities, a high recovery rate in the recycling process, and low-emission production when ...

    • Cruciform welded joints: hot-dip galvanization effect on the fatigue life and local energetic analysis 

      Viespoli, Luigi Mario; Mutignani, Francesco; remes, heikki; filippo, berto (Journal article; Peer reviewed, 2018)
      Even in a well-controlled technological process, a certain variability in the final product is present and this is very well the case of welded joints, where each single joint is slightly different from the others in terms ...

    • Cryogenic Hydrogen Storage Tanks Exposed to Fires: a CFD Study 

      Ustolin, Federico; Scarponi, Giordano E.; Iannaccone, Tommaso; Cozzani, Valerio; Paltrinieri, Nicola (Peer reviewed; Journal article, 2022)
      Hydrogen is one of the most suitable candidates in replacing heavy hydrocarbons. Liquefaction of fuels is one of the most effective processes to increase their low density. This is critical especially in large-scale or ...

    • Cultural heritage in project management: project appraisal and quality assurance in the early phase of major public investments 

      Stendebakken, Mari Oline Giske; Olsson, Nils (Journal article, 2017)
      This paper is an analysis of how cultural heritage values are handled in documentation related to early phase evaluations of major public investment projects in Norway. This study was instigated by an apparent lack in the ...

    • Cure Modeling of Large Casted Thermoset Polymer Parts 

      Heinze, Søren (Doctoral theses at NTNU;2018:407, Doctoral thesis, 2018)

    • Current Challenges and Opportunities Toward Understanding Hydrogen Embrittlement Mechanisms in Advanced High-Strength Steels: A Review 

      Sun, Binhan; Wang, Dong; Lu, Xu; Wan, Di; Ponge, Dirk; Zhang, Xiancheng (Peer reviewed; Journal article, 2021)
      Hydrogen embrittlement (HE) is one of the most dangerous yet most elusive embrittlement problems in metallic materials. Advanced high-strength steels (AHSS) are particularly prone to HE, as evidenced by the serious degradation ...

    • Current European flood-rich period exceptional compared with past 500 years 

      Blöschl, Günter; Kiss, Andrea; Viglione, Alberto; Barriendos, Mariano; Böhm, oliver; Brázdil, Rudolf; coeur, denis; demaree, gaston; llasat, maria carmen; MacDonald, Neil; Retsö, Dag; Roald, Lars; schmocker-Fackel, petra; Amorim, Ines S; belinova, monika; benito, gerardo; Bertolin, Chiara; Camuffo, Dario; Cornel, Daniel; doktor, radoslaw; elleder, libor; enzi, silvia; garcia, joao carlos; Glaser, Rüdiger; hall, julia; Haslinger, Klaus; hofstatter, michael; komma, jurgen; Limanówka, Danuta; lun, david; panin, andrei; Parajka, Juraj; petric, hrvoje; Rodrigo, Fernando S.; Rohr, Christian; schonbein, johannes; Schulte, Lothar; silva, luis pedro; toonen, willem H J; Valent, Peter; Waser, Jürgen; Wetter, Oliver (Peer reviewed; Journal article, 2020)
      There are concerns that recent climate change is altering the frequency and magnitude of river floods in an unprecedented way1. Historical studies have identified flood-rich periods in the past half millennium in various ...

    • Custom Design and Analysis of Modular High Voltage DC Generator 

      Magnus Borgersen (Master thesis, 2019)
      Denne masteroppgaven er skrevet som en del av den første fasen til ModHVDC-generator prosjektet, som er planlagt å utgjøre et EU-finansiert prosjekt med deltakere fra flere ulike land og institusjoner. Målet med ModHVDC ...

    • Customer order decoupling point (CODP) and control principles in engineer to order manufacturing 

      Ji, Xiangyuan (Master thesis, 2015)

    • Customer order decoupling point (CODP) and control principles in engineer to order manufacturing 

      Ji, Xiangyuan (Master thesis, 2015)

    • Customizing Paralympic rowing equipment 

      Kvam, Andris; Bjølseth, Magnus Kjærnet; Eikevåg, Sindre Wold (Master thesis, 2020)
      Denne oppgaven omhandler hvordan produktutvikling og en iterativ prototypeprosess har blitt brukt til å utvikle og produsere routstyr for Birgit Skarstein, hvor det overordnede målet har vært å forbedre hennes ytelser innen ...

    • Customizing Paralympic rowing equipment 

      Eikevåg, Sindre Wold; Bjølseth, Magnus Kjærnet; Kvam, Andris (Master thesis, 2020)
      Denne oppgaven omhandler hvordan produktutvikling og en iterativ prototypeprosess har blitt brukt til å utvikle og produsere routstyr for Birgit Skarstein, hvor det overordnede målet har vært å forbedre hennes ytelser innen ...

    • Customizing Paralympic rowing equipment 

      Bjølseth, Magnus Kjærnet; Kvam, Andris; Eikevåg, Sindre Wold (Master thesis, 2020)
      Denne oppgaven omhandler hvordan produktutvikling og en iterativ prototypeprosess har blitt brukt til å utvikle og produsere routstyr for Birgit Skarstein, hvor det overordnede målet har vært å forbedre hennes ytelser innen ...

    • Cutter wear mechanisms in hard rock tunnel boring 

      Macias, Javier; Nærland, Jarand; Espallargas, Nuria (Journal article; Peer reviewed, 2018)
      Cutter consumption and parameters such as cutter ring wear has a great relevance in the overall excavation time and cost in hard rock tunnel boring machines (TBMs), especially in hard rock conditions. Cutter wear involves ...

    • Cutting-Edge Progress in Stimuli-Responsive Bioadhesives: From Synthesis to Clinical Applications 

      Khadem, Elham; Kharaziha, Mahshid; Bakhsheshi-Rad, Hamid Reza; Das, Oisik; Berto, Filippo (Peer reviewed; Journal article, 2022)
      With the advent of “intelligent” materials, the design of smart bioadhesives responding to chemical, physical, or biological stimuli has been widely developed in biomedical applications to minimize the risk of wounds ...

    • CYBER SECURITY OF SAFETY INSTRUMENTED SYSTEMS 

      Adeyemi, Temilola Titilayo (Master thesis, 2023)
      Cybersikkerhet for sikkerhetsinstrumenterte systemer tar sikte på å tilby et rammeverk for å adressere en sikker ved design, strategi for å beskytte og sikre tilgjengeligheten til industriell automatisering og kontroll- ...

    • Cyber-Physical Systems in Libraries 

      Thushyanthan, Purusoth (Master thesis, 2023)
      Formålet med denne oppgaven er å utforske kunnskapsgapet mellom biblioteksektoren og muligheter innen digitalisering. Mer spesifikt tar denne avhandlingen stilling til bruken av dataintegrerte produksjonssystemer eller ...

    • Dam Vasslivatn - Modellforsøk for undersøking av kapasiteten til flomløpet 

      Natvik, Eirik Vee (Master thesis, 2014)
      Flomløpet til dam Vasslivatn i Hemne kommune i Sør-Trøndelag er eit lukka flomløp med overløpsterskel, sjakt, tunnel og utløp i nedstraums elv. Modellstudiar på flomløpet er tildegare blitt gjennomført i både master- og ...

    • DAM VASSLIVATN: MODELLFORSOK FOR UNDERSOKELSE AV KAPSITETEN TIL FLOMLOPET 

      Roe, Magnhild (Master thesis, 2013)
      Flomløpet til dam Vasslivatn i Hemne kommune i Sør-Trøndelag er et lukka flomløp med overløpsterskel, sjakt, tunnel og utløp i nedstrøms elv. Dammen eies av TrønderEnergi. Revurdering av dammen i 2011 fastslo at flomløpet ...