Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 3736-3755 av 3983
-
Tribological Testing of Environmentally Acceptable Lubricants for Maritime Applications
(Master thesis, 2016)In marine applications, such as ship stabilizers, manoeuvring or propulsion systems, a number of mechanical components are situated below the waterline. Due to negative effects of lubricant leakage in marine environments, ... -
Tribologisk undersøkelse: Validering av ThermaSiC-belegg
(Bachelor thesis, 2021)Abstract will be available on 2024-07-01 -
Tribologisk/material teknologisk studie: Anvendelse av Termisk Sprøytet ThermaSiC som Slitasjebelegg
(Bachelor thesis, 2020)Abstract will be available on 2023-06-20 -
Tribology at High Temperature and Pressure
(Master thesis, 2010)The thesis consists of a “state of the art study” on different materials resistance to adhesive wear, an investigation of existing and new test method, and an experimental part to address the influence of high pressures ... -
Tribology Mechanisms in Low-Friction Hardbanding Coatings.
(Master thesis, 2013)As the shallow and easily accessible oil and gas reservoirs are becoming depleted, the oil and gas industry has turned its attention towards the deeper and more remote reservoirs. The increased drilling depth, more complex ... -
Tribology Testing of Lubrication and Surface Treatment of Tool Interfaces in Hot Forging of Aluminium
(Master thesis, 2016)This thesis investigated the lubrication conditions in hot forging of aluminium. The most common lubricants to apply in hot forging of aluminium are oil-based and water-based, both containing graphite. Oil-based graphite ... -
Triple Bottom Line Approach to Individual and Global Sustainability
(Journal article; Peer reviewed, 2010) -
TVAC testing, redesign, and assembly of a 6U CubeSat payload
(Master thesis, 2023)HYPSO-2 vil bli den andre satellitten som sendes opp som en del av HYPerspectral Smallsat for Ocean Observation (HYPSO) prosjektet ved Norges teknisk-naturvitenskapelige universitet (NTNU). HYPSO-2 skal forsøke å forbedre ... -
Tverrskott i kassebruer
(Master thesis, 2011)Første del av rapporten gjengir teorien for brukasseprogrammet som er utviklet av Tore H.Søreide. Brukasse er et analyseprogram for dimensjonering av tverrsnitt og tverrkryss med hensyn på torsjonsbelastninger. Teorien er ... -
Two-parameter fracture model for cortical bone
(Peer reviewed; Journal article, 2016)The analysis of the bone fracture behaviour is fundamental for prevention, diagnosis and treatment of traumas. In the present paper, an experimental analysis of the fracture behaviour of a bovine femoral cortical bone ... -
Two-terminal reliability analysis for multi-phase communication networks
(Journal article, 2016)Abstract: Most researches of network reliability generally assume that the system structures do not change with time. This paper presents the concept of multi-phase network systems (MPNS) to consider dynamic characteristics ... -
Type AISI 316 Stainless Steel in Chloride Containing Environment – Effect of Mo Content on the Corrosion Properties and a Pit Propagation Study
(Master thesis, 2019)Denne rapporten fokuserer på korrosjonsutfordringer med det austenittiske rustfrie stålet AISI 316L (UNS S31603) i marin atmosfære. AISI 316L har vært et utbredt materialvalg i marin atmosfære i flere tiår på grunn av ... -
TYPICAL FALLACIES REGARDING POTENTIALLY VACATED PROTECTED BUILDINGS
(Journal article, 2021) -
UHMWPE-Based Glass-Fiber Composites Fabricated by FDM. Multiscaling Aspects of Design, Manufacturing and Performance
(Peer reviewed; Journal article, 2021)The aim of the paper was to improve the functional properties of composites based on ultra-high molecular weight polyethylene (UHMWPE) by loading with reinforcing fibers. It was achieved by designing the optimal composition ... -
Ultra-Cheap Renewable Energy as an Enabling Technology for Deep Industrial Decarbonization via Capture and Utilization of Process CO2 Emissions
(Peer reviewed; Journal article, 2022)Rapidly declining costs of renewable energy technologies have made solar and wind the cheapest sources of energy in many parts of the world. This has been seen primarily as enabling the rapid decarbonization of the electricity ... -
Ultrasonic NDT and its Ability to Detect Pitting Corrosion Behavior on Carbon Steel
(Master thesis, 2023)Denne rapporten fokuserer på å teste funksjonaliteten til overvåkningsutstyr basert på ultralyd, prod- usert av Sensorlink AS. Teknikker innenfor ultrasonisk NDT har blitt brukt for inspeksjon av tilstanden til rørledninger ... -
Uncertain Factors in the Cost Estimation Process for the Helltunnel - SVV
(Master thesis, 2015)This master s thesis investigates the key uncertain factors and phenomena influencing the cost estimation process in tunnel projects. For this, two completed tunnels from the SVV (Statens Vegvesen Road Authority) are ... -
Uncertainties in scheduling and execution of trackwork in Sweden
(Peer reviewed; Journal article, 2023)Trackwork planning and scheduling are demanding because they require strategic foresight and must be completed well in advance. In Sweden, trackwork is performed by maintenance contracting companies during an operation ... -
Uncertainty Analyses of Time in Construction Projects
(Master thesis, 2017)The aim of this master thesis is to investigate how uncertainty analysis on time can contribute to a better foundation for decision-making in the project planning phase, and by this reduce the total time spent in this ... -
Uncertainty in Calibration of Reference Standards for Dimensional Measurements
(Master thesis, 2019)Målelaboratoriet ved NTNU brukes til å kalibrere normaler (eng: reference standards) som brukes av Justervesenet for å verifisere andre måleinstrumenter. Normaler, som rektangulære parallellepiped og sylindere, blir kalibrert ...