Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 3544-3563 av 3992
-
Temperature dependence of the shear strength in adhesively bonded joints reinforced with multi-walled carbon nanotubes
(Journal article; Peer reviewed, 2018)In this paper, the temperature dependence of the strength of adhesively bonded shear lap joint reinforced with multi-walled carbon nanotubes (MWCNTs) was studied. The results showed that increasing the testing temperature ... -
Temperature-dependent mechanical properties of Tin+1CnO2 (n= 1, 2) MXene monolayers: a first-principles study
(Peer reviewed; Journal article, 2020)Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (named as MXenes) have become of the fastest growing family of 2D materials in terms of compositions and their applications in different areas. ... -
Temperature-dependent properties of magnetic CuFeS2 from first-principles calculations: Structure, mechanics, and thermodynamics
(Journal article; Peer reviewed, 2019)Chalcopyrite (CuFeS2) is an antiferromagnetic semiconductor with promising magnetic and electrical properties, although these properties are not yet completely understood. The structural, magnetic, and electronic properties ... -
Temporal Static Visualisation of Transcripts for Pre-Analysis of Video Material: Identifying Modes of Information Sharing
(Chapter, 2017)When evaluating group performance in the field of group collaboration different forms of information sharing types are utilised as indicators for well performing or under performing groups. A transcript-file of a group ... -
Tensile and fatigue behavior of a Pb-Sn-Sb alloy investigated via small-scale in-situ mechanical testing in SEM
(Peer reviewed; Journal article, 2020)Pb-Sn-Sb alloys (E-alloy) are commonly used in subsea power cable sheathing. Due to the relatively low melting temperature, i.e. around 600 K, this type of alloy is prone to experience microstructural time-dependent evolution ... -
Tensile characterization of a lead alloy: creep induced strain rate sensitivity
(Journal article; Peer reviewed, 2018)The aim of this work is to investigate and define the tensile properties of cable sheathing lead alloy. In particular its strain rate sensitivity due to the pronounced creep already present at room temperature, in relation ... -
Tensile failure prediction of U-notched plates under moderate-scale and large-scale yielding regimes
(Journal article, 2018)The main goal of the present research is to check if the recently published experimental results on tensile load-carrying capacity (LCC) of ductile U-notched Al 7075-T6 and Al 6061-T6 plates could successfully be predicted ... -
Test og analyse av MES for produksjonsovervåkning
(Bachelor thesis, 2022)I prosjektet er det gjennomført en test og analyse av et Manufacturing Execution System (MES), MachineMetrics. Testen ble gjennomført på tre CNC-maskiner i produksjonen til Mjøs Metallvarefabrikk AS. Bedriften ønsker å få ... -
Test-rigg for skader på lager med akustisk emisjon (AE)
(Bachelor thesis, 2022)Det har blitt ferdig laget et design av en lab-skala rigg for destruktivtesting av hjullagere med AE sensorer. Denne oppgaven omhandler informasjonshenting for teori innsamling som skal brukes på riggen, og for flere design ... -
Testing a GIS-based methodology for optimal location of Pumped Storage power plants in Norway
(Master thesis, 2013)Use and test a GIS system that have been developed for this purpose, and use it to locate possible sites within a defined areaStudy the sites that were identified and investigate the feasibility of these sites, and thereby ... -
Testing and Verification of a New Corporate Sustainability Assessment Method for Manufacturing: A Multiple Case Research Study
(Journal article; Peer reviewed, 2018)This paper aims at answering the question of how to design a theoretically sound corporate sustainability assessment (CSA) method that can strengthen the ability of manufacturing companies to contribute to global sustainable ... -
Testing av resirkulert plast
(Master thesis, 2019)I forbindelse med denne oppgaven har det blitt gjennomført strekktester og differensiell skanningskalorimetri-tester av tre gjenvunnede plastfraksjoner fra gjenvinningsbedriften NOPREC. Som teoretisk grunnlag har det i ... -
Testing av systemvirkningsgrad i bølgekraftomformer og utvikling av et energieffektivt bølgekraftsystem
(Bachelor thesis, 2023)Oppgaven omhandler testing av systemvirkningsgrad i en bølgekraftomformer, samt hydraulisk modifikasjon og videreutvikling av design og systemkomponenter. Det ble utarbeidet to aktuelle design for videre beregning og ... -
Testing av vindlast på fagverksmaster i aluminium
(Master thesis, 2016)Denne masteroppgåva handlar i hovudsak om å finne reelle kraftfaktorar cf til fagverksmaster i aluminium som ein kan sjå fleire stader langs bilvegane. Verksemda som lagar desse mastene, Lattix AS, ynskte å få større ... -
Testing of Infiltration System for Stormwater - Permeable Pavement
(Master thesis, 2016)In this master thesis it is focused on permeable pavement and with an extra focus on permeable interlocking concrete unit blocks as the type of pavement. This is because the test facility in Sandnes is built with this type ... -
Testing of Safety Systems: Bad Effects and Their Modelling with Comparative Studies
(Master thesis, 2018)Safety systems are used in the process industry for many years. The application of these system is based on IEC 61508 standard. In this standard, proof testing is recommended in order to achieve the required SIL. It is ... -
Testing of Software-Intensive Hyperspectral Imaging Payload for the HYPSO-1 CubeSat
(Peer reviewed; Journal article, 2022)The growing community of CubeSats vendors makes it possible to launch and fly novel payloads for targeted applications by procuring flight-proven CubeSat platforms. The importance of embedded software for such Commercial ... -
Testing the power law on urban water and wastewater pipeline networks
(Journal article, 2011) -
The Acquisition and Codification of Knowledge for Knowledge-Based Engineering
(Doctoral theses at NTNU;2016:364, Doctoral thesis, 2016)Knowledge is the backbone of any engineering challenge. Through this knowledge, man has been able to transform the elements of our planet into usable structures that serve a purpose in our modern world. By utilizing ... -
The Active Knowledge Modeling approach To Configurable Product and Process Design
(Master thesis, 2011)This master thesis describes the first steps in the development of a new approach for effective collaborative product development and delivery. The approach is based on Active Knowledge Modeling (AKM) and the Collaborative ...