Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 3261-3280 av 3992
-
Satellite Product to map drought and extreme precipitation trend in Andalusia, Spain: A novel method to assess heritage landscapes at risk.
(Peer reviewed; Journal article, 2022)The objective of this work is to develop a methodology for the identification of extreme rain and drought events that have occurred in the last 30 years using products derived from satellite images. Proposed methodology ... -
Scale effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling
(Peer reviewed; Journal article, 2021)Fused Deposition Modeling (FDM) is one of the most widely used additive manufacturing processes in the world. It is also a rapid prototyping process that can fabricate the physical model generated from the CAD model ... -
Scaling effect on the fracture toughness of bone materials using MMTS criterion
(Journal article, 2018)The aim of this study is to present a stress based approach for investigating the effect of specimen size on the fracture toughness of bone materials. The proposed approach is a modified form of the classical fracture ... -
Scenarios for biodegradable solid waste management and energy recovery in the 'A' Ward in Mumbai, India
(Master thesis, 2010)Introduction. Mumbai is one of the most highly-populated cities in the world and the commercial capital of India. Every day, about 6500 tons of municipal solid waste (MSW) and 2500 tons of construction and demolition waste ... -
Scenarios for the European aluminium cycle and implications for energy use in production
(Master thesis, 2010)The goal of this project was to characterize the contemporary European aluminium cycle, to quantify the material flows of aluminium within the system, and to find technologies and their specific energy consumption that ... -
Sealing materials seals for arctic applications
(Master thesis, 2016)This thesis is about exploring the performance of rubber O-ring seals made of materials such as: ELAST-O-LION 101, base HNBR and HNBR 50 CB, under cold temperatures and compressions equal to 10% and 20%. Initially a test ... -
Seasonal change in the wetting characteristics of the cuticle of the Collembola Cryptopygus clavatus (Schött, 1893)
(Journal article; Peer reviewed, 2015)The littoral Collembola Cryptopygus clavatus spends the summer submerged, grazing on algae under water, and the winter on dry land. The cuticles of Collembola are, in general, highly water repellent, often superhydrophobic; ... -
Secondary delays within the same rolling stock circulation plan
(Chapter, 2016) -
Secure Electricity Supply in a Single European Market in 2030
(Master thesis, 2014)The purpose of this master thesis study is to investigate how electricity can be securely supplied in the European Union in 2030. Fitting the identified future state of the electricity supply system in the European Union ... -
Sedimentation and sediment handling in Himalayan reservoirs
(Doktoravhandlinger ved NTNU, 1503-8181; 2012:208, Doctoral thesis, 2012)Dams have been promoted as an important means of meeting needs for water and energy. Due to increasing population in the earth, more dams are needed to be built in the future to meet people’s increased demand for water, ... -
Sedimentation and Sustainability of Hydropower Reservoirs: Cases of Grand Ethiopian Renaissance Dam on the Blue Nile River in Ethiopia
(Master thesis, 2013)Summary Sediment accumulation in a reservoir is a serious problem that threatens sustainability of the reservoir and has severe consequence on reservoir productivity during its operation time. In order to predict the ... -
Sediments in Angostura Hydropower Reservoir
(Master thesis, 2012)Reservoirs in areas with a high sediment yield will without mitigation sooner or later be filled up with sediments, reducing the volume available for regulation for electric generation. Flushing of sediments is a management ... -
Sekundærkjøling av thrustlager i retningsstyrt kjernebor
(Bachelor thesis, 2020)Abstract will be available on 2023-05-20 -
Self-limiting atomic layer deposition of barium oxide and barium titanate thin films using a novel pyrrole based precursor
(Journal article; Peer reviewed, 2016)Barium oxide (BaO) is a critical component for a number of materials offering high dielectric constants, high proton conductivity as well as potential applicability in superconductivity. For these properties to keep pace ... -
Self-Supervised Human Activity Recognition on Free-Living Sensor Data Streams
(Master thesis, 2023)Å kvantifisere befolkningens fysiske aktivitetstilstand gjøres tradisjonelt gjennom spørreskjemaer, en metode som er underlagt iboende skjevheter. Som et alternativ kan menneskelig aktivitetsgjenkjenning (HAR) gjennom ... -
A Semi-Analytical Model for the Heat Generation during Hybrid Metal Extrusion and Bonding (HYB)
(Journal article; Peer reviewed, 2021) -
Sensing of Structural Damage with OBR Based Fibre-Optic Networks
(Chapter, 2018)Optical fibre networks based on optical backscatter reflectometry i.e. the OBR technology is a new and promising method for the inspection of safety critical structures. It utilizes regular telecommunications grade optical ... -
Sensitivitetsanalyse av Topologi Optimaliseringsprogrammer ved bruk av SIMP, Optimality Criteria og Level-Set Method
(Bachelor thesis, 2019)Denne oppgaven er skrevet som en introduksjon til topologioptimalisering, dets teori og metoder, og en sammenligning av fire programmer, to Open Source (TopOpt and OpenLSTO) og to kommersielt tilgjengelige (Abaqus and ... -
Sensitivity of lake ice regimes to climate change in the Nordic region
(Journal article; Peer reviewed, 2014-08-28)A one-dimensional process-based multi-year lake ice model, MyLake, was used to simulate lake ice phenology and annual maximum lake ice thickness for the Nordic region comprising Fennoscandia and the Baltic countries. ... -
Sensor Control in Robotic Surgery
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:27, Doctoral thesis, 2004)This doctoral thesis investigates sensor control in robotic surgery. At the present state of the art, robotic technology for surgical applications can broadly be divided into four main classes: • Robotic assistance • ...