Browsing Institutt for maskinteknikk og produksjon by Title
Now showing items 159-178 of 4004
-
Additive or Conventional Manufacturing for Spare Parts: Effect of Failure Rate Uncertainty on the Sourcing Option Decision
(Peer reviewed; Journal article, 2022)Additive manufacturing (AM) has recently been reported as enabler of digital spare parts supply. Thanks to its promise to produce spare parts with shorter lead times, AM may enable a make-to-order rather than a make-to-stock ... -
Addressing Collaboration Challenges in Project-Based Learning: The Student’s Perspective
(Peer reviewed; Journal article, 2021)Project-based learning has been explored in a variety of contexts and different phases of education. Several implementation challenges are associated with project-based learning. Among these challenges is ensuring collaboration ... -
Addressing Delivery Related Challenges Of High-Mix Manufacturing Systems
(Master thesis, 2018)This thesis aims to address delivery related challenges of high-mix manufacturing systems. Delivery related challenges refer to problems posed by factors, which directly or indirectly impact delivery performance. To address ... -
Addressing sustainability: setting and governing sustainability goals and targets
(Peer reviewed; Journal article, 2023)Businesses in all kinds of industries, including facility management (FM), are increasingly integrating sustainability into their practices. The integration of sustainability practices involves expanding beyond economic ... -
Addressing the Performance of Order Acceptance
(Journal article; Peer reviewed, 2017)While there are many mathematical approaches to order acceptance (OA), the performance of OA in practice is overlooked. This paper assesses current OA methods and performance measures that could measure OA. The outcome is ... -
Addressing the Sustainable Development Goals with a System-of-Systems for Monitoring Arctic Coastal Regions
(Peer reviewed; Journal article, 2020)Norway has a large coastal industry and a strong motivation for developing systems to enable sustainable management of ocean resources. Recent advances in collaborating autonomous systems, Internet-of-Things, microsatellites, ... -
Adhesion and Composition of Flash Rust Formed in Humid Air
(Master thesis, 2021)En teknikk som har blitt populær for vedlikehold av belegg i skipsindustrien i nyere tid, er ultrahøytrykk vannjetting. En av ulempene med denne metoden er at den kan føre til at metallet begynner å danne flash rust. ... -
Adhesion between rubber and glass in dry and lubricated condition
(Journal article; Peer reviewed, 2018)We study the adhesion between differently processed glass and filled bromobutyl rubber in dry conditions, in water, and in silicone oil. The boundary line between contact and non-contact in adhesion experiments can be ... -
Adhesion of metal-composite joints European COPATCH project
(Master thesis, 2011)Composite material patching is a very promising method for repairing and/or reinforcing metallic structures. In order to apply this, investigation of the joint strength and properties needs to be done. This master thesis ... -
Adhesion, Friction and Leakage in Contacts with Elastomers
(Doctoral theses at NTNU;2018:277, Doctoral thesis, 2018)Adhesion, friction and leakage in contacts with elastomers is central to many technologically demanding applications such as tires, seals, wiper blades and syringes to just name a few. These tribological systems are very ... -
Advanced Food Processing Equipment Design for a Sustainable Salmonid Fish Industry in Norway
(Doctoral thesis at NTNU;2015:218, Doctoral thesis, 2015)Food production is one of today’s largest contributors to resource consumption, transformation of landscape and land use as well as greenhouse gas emissions. As the world’s population grows, the food consumption grows with ... -
Advanced local approach for the fatigue assessment of aluminium weldments
(Master thesis, 2018)The first step in fatigue design of welded joint is particularly complex e difficult. Welded bead geometries can not be precisely definied. Parameters such as bead shape and toe radius change from joint to joint, even if ... -
Advanced Remote Control of Industrial Robots
(Master thesis, 2012)The last few years, the use of industrial robots for tasks such as material handling, welding, painting and assembly, has expanded considerably - also in general industry. A company’s use of robots requires a certain ... -
Advanced small-scale characterization of hydrogen embrittlement
(Master thesis, 2016)A large amount of micro-cantilevers were made using a focused ion beam (FIB) microscope. The cantilevers were made to be tested under cyclic loading in a triboindenter to determine the hydrogen effect on the grain boundaries ... -
Advanced small-scale characterization of hydrogen embrittlement in nickel and nickel alloys
(Master thesis, 2018)The demand for high strength materials is increasing in the modern industrial development. With more challenging applications and extreme environments, it is essential that materials are able to meet capacity and safety ... -
Advanced techniques for Environmental Risk Assessment within the Oil & Gas sector
(Master thesis, 2019)Olje- og gassinstallasjoner i sensitive områder med tøffe miljøforhold kan kreve forbedret risikovervåkning, vurdering og styring for å forhindre og begrense skaden forårsaket av utilsiktet hydrokarbonutslipp i sjøen. Dette ... -
Advancements in Control System, Hardware, and Testing for an Autonomous Sailing Boat
(Master thesis, 2023)Autonome overflatekjøretøy har vist seg å være gode datasamlere. Disse fartøyene er i dag et godt valg på grunn av behovet for mye data for å forstå det endrende miljøet. En kombinasjon av god mobilitet og tilpasningsmuligheter, ... -
Advances in Production Management Systems: Issues, Trends, and Vision Towards 2030
(Chapter, 2021)Since its inception in 1978, the IFIP Working Group (WG) 5.7 on Advances in Production Management Systems (APMS) has played an active role in the fields of production and production management. The Working Group has focused ... -
Advances in Spare Parts Classification and Forecasting for Inventory Control: A Literature Review
(Peer reviewed; Journal article, 2021)Ensuring availability of spare parts is essential for original equipment manufacturers (OEMs) to support after-sales maintenance and repair services for their products. Previous studies have pointed out shortcomings of ... -
Advancing Additive Manufacturing Technology for Production
(Master thesis, 2018)In this master s thesis we consider three different areas of research in the advancement of AM technology for production environments: In the first we assembled and made a case for the use of a SLA/ DLP 3D-printer at our ...