Blar i Institutt for maskinteknikk og produksjon på tittel
Viser treff 3583-3602 av 4019
-
Testing of Safety Systems: Bad Effects and Their Modelling with Comparative Studies
(Master thesis, 2018)Safety systems are used in the process industry for many years. The application of these system is based on IEC 61508 standard. In this standard, proof testing is recommended in order to achieve the required SIL. It is ... -
Testing of Software-Intensive Hyperspectral Imaging Payload for the HYPSO-1 CubeSat
(Peer reviewed; Journal article, 2022)The growing community of CubeSats vendors makes it possible to launch and fly novel payloads for targeted applications by procuring flight-proven CubeSat platforms. The importance of embedded software for such Commercial ... -
Testing the power law on urban water and wastewater pipeline networks
(Journal article, 2011) -
The Acquisition and Codification of Knowledge for Knowledge-Based Engineering
(Doctoral theses at NTNU;2016:364, Doctoral thesis, 2016)Knowledge is the backbone of any engineering challenge. Through this knowledge, man has been able to transform the elements of our planet into usable structures that serve a purpose in our modern world. By utilizing ... -
The Active Knowledge Modeling approach To Configurable Product and Process Design
(Master thesis, 2011)This master thesis describes the first steps in the development of a new approach for effective collaborative product development and delivery. The approach is based on Active Knowledge Modeling (AKM) and the Collaborative ... -
The Adaptive Intelligent Model for Process Diagnosis, Prediction and Control
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:154, Doctoral thesis, 2004)This research work focuses at first on the intelligent model development for process state (special for fault) detection, behavior prediction and process control for complex industrial processes. In the model architecture, ... -
The Application of Blockchain Technology in Norwegian Fish Supply Chains - A Case Study
(Master thesis, 2018)The work conducted for this thesis is meant to benefit both industry and the scientific community. Creating an assessment for blockchain technology in a specific industrial (supply chain) setting and later expand to a more ... -
The Application of Concurrent Engineering in Infrastructure Projects
(Master thesis, 2017)The construction industry today is considered to be lagging competitively behind in comparison to other industries. The reason for this is thought of by many researchers to be the fragmented project process, the traditional ... -
The application of strain energy density criterion to fatigue crack growth behavior of cracked components
(Journal article; Peer reviewed, 2018)The aim of this paper is to study the effects of specimen geometry on fatigue crack growth rate and fatigue life in cracked components by using a modified form of averaged strain energy density criterion. The modified ... -
The Biocompatibility and Osteogenic Properties of Additive Manufactured Porous Ti-6Al-4V Scaffolds
(Master thesis, 2018)Human bone is constantly being remodeled, and has the ability to repair itself when damage occurs. However, sometimes the fractures are so intense that they exceed the critical non-healable size. In order to repair such ... -
The Burridge-Knopoff-Pad Model - A New Model for Studying Noise Generation & Brake Dynamics
(Master thesis, 2018)In this Thesis, I have presented a new model, which, to the best of my knowledge, has never been studied before. The Burridge-Knopoff--Pad model combines the plain Burridge-Knopoff model with a resonating mass. The model ... -
The capabilities and effectiveness of remote inspection of wind turbines
(Journal article; Peer reviewed, 2015)This paper evaluates the effectiveness of remote inspections of wind turbines. The first part of the paper presents a usability test where remote inspections with a robot prototype have been directly compared to manned ... -
The Capable-To-Promise Function In Production Planning & Control
(Master thesis, 2022)This thesis report focuses on Capable-To-Promise (CTP) concept within the Operations Management field of research. CTP is an extension of the more commonly used Available-To-Promise, and has potential for being more actively ... -
The Challenges of Logistics 4.0 for the Supply Chain Management and the Information Technology
(Master thesis, 2016)Internet has changed our life. It has brought a new way of communication, transferring information and making businesses. The term already known as Internet of things , provides the idea of the digital connection between ... -
The Characterization of Deformation Modes and Production of Passive Adaptive Composite Marine Propellers
(Master thesis, 2020)Abstract will be available on 2023-07-23 -
The Compact Separation Laboratory - Design and Engineering of Phase 2
(Master thesis, 2017)Increased oil and gas production over the past decades have claimed most of the easily accessible offshore reservoirs. Developing new reservoirs in remote environments and at large water depths are challenging for topside ... -
The concept of sustainable manufacturing and its definitions: A content-analysis based literature review
(Journal article; Peer reviewed, 2017)The concept of sustainable manufacturing (SM) is becoming increasingly mature due to the focus on many of its research topics for a long time. This research has undoubtedly extended the body of knowledge, yet the numerous ... -
The concurrent application of lean production and ERP: Towards an ERP-based lean implementation process
(Journal article, 2013)Lean production and enterprise resource planning systems are often quoted as being the two most important strategies for achieving competitive advantage in today's global manufacturing environments. Though IT has traditionally ... -
The Corporate Platform – a Mean to Industrialise Design of Customised Products
(Doktoravhandlinger ved NTNU, 1503-8181; 2006:145, Doctoral thesis, 2006)In the last century there has been a vast increase in global competitiveness. The flow of products across borders is greater than ever before and the focus on price and performance increased. Companies feel this increased ... -
The cost of learning from failures and mistakes in product design: Reviewing the literature
(Journal article; Peer reviewed, 2019)In the design phase of product development (PD) process, most new products face significant uncertainties and risks. Uncertainty is typically associated with a lack of information, while learning is a process that acquires ...