Blar i Institutt for geovitenskap og petroleum på tittel
Viser treff 1468-1487 av 2560
-
Modeling and Inversion of Marine Electromagnetic Data: – with applications in hydrocarbon prospecting
(Doktoravhandlinger ved NTNU, 1503-8181; 2013:67, Doctoral thesis, 2013)This thesis deals with modeling and inversion of electromagnetic data for geophysical applications. The main topic is modeling and inversion of marine Controlled Source Electromagnetic (mCSEM) data, but joint inversion of ... -
Modeling and Management of Scale Potential in an Oil Field Production Network
(Master thesis, 2013)Diversity and complexity of chemical treatment operations provide difficulties to evaluate an impact of chemicals used for solving different production issues. Integrated chemical management system will provide a better ... -
Modeling and Optimization of the Rich Gas-Condensate Reservoir: Upstream, Midstream and Downstream Integration
(Master thesis, 2013)Simulation and Optimization of the production assets occurs in several and various cycles.Those are: "Field Management", "Production Optimization" and "Operation Efficiency". Decisions making process obviously based on ... -
Modeling and Prediction of Borehole Collapse Pressure during Underbalanced Drilling in Shale
(Doktoravhandlinger ved NTNU, 1503-8181; 2011:39, Doctoral thesis, 2011)Drilling with a bottomhole pressure less than the formation pore pressure (underbalanced) will usually increase the risk of borehole collapse due to yielding or failure of the rock adjacent to the borehole. Understanding ... -
Modeling burial induced changes in physical sandstone properties - A case-study of North Sea and Norwegian Sea sandstone formations
(Master thesis, 2017)The changes in physical properties of sandstones with burial depth are a result of mechanical and chemical compaction processes. These processes are affected by rock microstructure, pressure regimes and temperature history. ... -
Modeling CO2 Injection in Fractured Reservoirs Using Single Matrix Block Systems
(Doktoravhandlinger ved NTNU, 1503-8181; 2011:101, Doctoral thesis, 2011)In this thesis, CO2 injection in matrix/fracture systems has been studied using a finely-gridded compositional simulator representing a single matrix block. Three laboratory experiments were modeled to investigate whether ... -
Modeling compositionally-sensitive reservoirs
(Doktoravhandlinger ved NTNU, 1503-8181; 59, Doctoral thesis, 2002)This research work provides guidelines for choosing the PVT model (black-oil or EOS compositional) for full-field reservoir simulation of volatile/near-critical oil and gas condensate fluid systems produced by depletion ... -
Modeling fluid flow around an air gun bubble
(Master thesis, 2014)In marine seismic acquisition, the bandwidth of the recorded signal is limited, on both the low and high end, and it is usually accepted that by towing the source deeper the low-frequency content in the seismic data increase. ... -
Modeling interfacial tension of the hydrogen-brine system using robust machine learning techniques: Implication for underground hydrogen storage
(Peer reviewed; Journal article, 2022)During the last years, there has been a surge of interest in cleaner ways for producing energy in order to successfully handle the climate issues caused by the consumption of fossil fuels. The production of hydrogen (H2) ... -
Modeling of CO2 Storage in the Smeaheia Field
(Master thesis, 2018)Carbon capture and storage, CCS, is a method that can reduce today s carbon emissions by approximately 20 %. Since the world still highly depends on the use of fossil fuel energy, this method is necessary for reaching the ... -
Modeling of fractured producer and injection in low permeability reservoir
(Master thesis, 2013)Modeling of fractured producer and injection well in low permeability reservoir -
Modeling of gel deformation
(Master thesis, 2013)Drilling fluids can build a gel structure under periods with ceased circulation. Pumping or drill string rotation can be used to break the gel. In some cases the measures might fail, e.g. gel breaking pressure might exceed ... -
Modeling of Miscible WAG Injection Using Real Geological Field Data
(Master thesis, 2013)Maximizing oil recovery is the challenge for the oil industry in the North Sea and world wide. Norwegian national company Statoil set the goal to reach oil recovery of 60% for their fields on NCS. To achieve this target a ... -
Modeling of Oil Water Flow Development Along the Pipe Downstream a Choke Valve
(Master thesis, 2019)The main objective of the thesis is to propose and test a way to model flow development downstream a choke valve. Experiments were performed in the SINTEF medium scale flow loop in order to study oil-water flow development ... -
Modeling of Subsea CO2 Transportation and Injection Pipe Networks, The Case of Snøhvit
(Master thesis, 2024)Gassinjeksjon har vært brukt i olje- og gassindustrien i mange år og har bidratt til å utvinne millioner av fat som ikke kunne blitt utvunnet med den primære drivmekanismen. Distribusjonsnettverk for gassinjeksjon blir ... -
Modeling of Underground Gas Storage Project
(Master thesis, 2010)As underground gas storage becomes one of the important and effective methods for supplying natural gas, modeling such system would help any individuals who own storage facilities plan their project and optimize their ... -
Modeling of Water Behavior in Hydraulically-Fractured Shale Gas Wells
(Master thesis, 2013)This study presents the modeling of water behavior in hydraulically-fractured of shale gas wells. A five layers model represents a hydraulically-fractured shale gas well was built in Sensor reservoir simulator through ... -
Modeling reservoir geomechanicsusing discrete element method:Application to reservoirmonitoring
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:233, Doctoral thesis, 2008) -
Modeling wax thickness in single-phase turbulent flow
(Master thesis, 2012)Oil and gas transport is today a vital part of the industry. Oil cooled during transport in pipelines may precipitate paraffin wax. Precipitated wax may deposit on pipe walls and cause flow restrictions. Deposition models ... -
Modeling Well Performance in Tight Unconventionals
(Master thesis, 2019)Denne masteroppgaven oppfyller, i sin helhet, kravene satt i kurset ``TPG4920 Petroleumsteknologi, Masteroppgave'' for studieprogrammet MTPETR ved Norges Teknisk-\\Naturvitenskapelig Universitet (NTNU). Det er det endelige ...