Browsing Institutt for energi og prosessteknikk by Journals "Chemical Engineering Journal"
Now showing items 1-9 of 9
-
Cost-effective clean ammonia production using membrane-assisted autothermal reforming
(Peer reviewed; Journal article, 2020)Ammonia is a widely produced industrial chemical, primarily for use in the fertilizer industry. Recently, interest has also grown in ammonia as a carbon-free energy carrier because it is easier to store and transport than ... -
Experimental demonstration of pressurized chemical looping combustion inan internally circulating reactor for power production with integrated CO2capture
(Peer reviewed; Journal article, 2020)This study presents an experimental demonstration of pressurized chemical looping combustion (CLC) in an internally circulating reactor (ICR). The ICR concept is a novel alternative to the conventional interconnected ... -
Grid-independent Eulerian-Lagrangian approaches for simulations of solid fuel particle combustion
(Journal article; Peer reviewed, 2020)In this study, a computational fluid dynamics (CFD) model with three coarse graining algorithms is developed with the implementation of a layer based thermally thick particle model. Three additional coupling methods, cube ... -
High-temperature pyrolysis modeling of a thermally thick biomass particle based on an MD-derived tar cracking model
(Peer reviewed; Journal article, 2021)Biomass pyrolysis in the thermally thick regime is an important thermochemical phenomenon encountered in many different types of reactors. In this paper, a particle-resolved algorithm for thermally thick biomass particle ... -
Internally circulating fluidized-bed reactor for syngas production using chemical looping reforming
(Peer reviewed; Journal article, 2018)Chemical looping reforming (CLR) is a promising method for achieving autothermal methane reforming without the energy penalty of an air separation unit that is required for partial oxidation (POX) or oxygen-blown autothermal ... -
Phase transition enabled durable anti-icing surfaces and its DIY design
(Journal article; Peer reviewed, 2019)Generally, the longevity and durability of slippery liquid infused porous surfaces (SLIPS) applied for anti-icing purpose are of great challenge. In this work, phase transformable slippery liquid infused porous surfaces ... -
Selective recovery of silver from copper impurities by electrodialysis: Tailoring monovalent selective cation exchange membranes by monomolecular layer deposition
(Peer reviewed; Journal article, 2023)Selective recovery of silver from secondary resources enriched with copper impurities is a well-known challenge but is urgently needed by the industry. This study addresses the challenge by developing a highly efficient ... -
Sorbents screening for post-combustion CO2 capture via combined temperature and pressure swing adsorption
(Peer reviewed; Journal article, 2020)Adsorption-based post-combustion CO2 capture is enjoying significant research attention due to its potential for significant reductions in energy penalty, cost and environmental impact. Recent sorbent development work has ... -
The swing adsorption reactor cluster (SARC) for post combustion CO2 capture: Experimental proof-of-principle
(Journal article; Peer reviewed, 2018)This paper presents the first experimental demonstration of the novel swing adsorption reactor cluster (SARC) for post combustion CO2 capture. The SARC concept combines a temperature and vacuum swing for sorbent regeneration. ...